GSI Creos Gundam Marker GM01 Black: Ultra Fine Panel Lining Manual

1. Introduction

Thank you for choosing the GSI Creos Gundam Marker Ultra Fine Type for Panel Lining. This 3-pack of GM01 Black markers is designed to enhance the visual detail and three-dimensionality of your plastic models. Its ultra-fine tip allows for precise application, making it an essential tool for model enthusiasts of all skill levels.

2. Product Features

• Ultra Fine Point: Specifically designed for filling in the intricate panel lines and recessed details on plastic models.
• Enhanced Realism: Adds emphasis and depth, significantly improving the three-dimensionality of your model.
• Easy to Use: Provides a straightforward method to enhance model appearance, even without extensive painting experience.
• Versatile Application: Suitable for panel lining on various plastic parts, including white, blue, and gray colors.
• Convenient 3-Pack: Ensures ample supply for multiple projects.

3. Package Contents

The GSI Creos Gundam Marker GM01 Black 3-pack includes:

• 3 x GSI Creos Gundam Marker Ultra Fine Type (GM01 Black)
• 1 x Sticky Note Set

4. Setup

1. Prepare Your Workspace: Ensure you have a clean, well-lit, and well-ventilated area.
2. Shake the Marker: Before each use, gently shake the marker to ensure the ink is thoroughly mixed.
3. Prime the Tip: Press the marker tip gently onto a scrap piece of paper until the ink flows consistently.

5. Operating Instructions

Follow these steps for effective panel lining:

1. Identify Panel Lines: Locate the recessed lines and depressions on your plastic model parts where you wish to apply the marker.
2. Apply the Marker: Gently trace the panel lines with the ultra-fine tip of the GM01 Black marker. The ink is designed to flow into the grooves.
3. Wipe Off Excess: Allow the ink to dry for a short period (typically less than 5 minutes). Then, use a cotton swab, paper towel, or even your finger to gently wipe away any excess ink that has spread outside the panel lines. The ink is formulated to be easily removable from the plastic surface.

Image 1: Applying the GM01 Black marker to the head of a Gundam model. The fine tip allows for precise application into the recessed panel lines.

Image 2: An example of a Gundam model with panel lines applied, demonstrating the improved visual impact.

Image 3: Detailed view of panel lining on the legs of a Gundam model, showing how the lines define the parts.

Image 4: A different angle of panel-lined Gundam legs, emphasizing the clean and sharp appearance achieved with the marker.

6. Maintenance

• Cap Securely: Always replace the cap firmly after use to prevent the tip from drying out.
• Clean Tip (if needed): If the felt tip becomes clogged or accumulates dissolved paint, gently wipe it with a clean, lint-free cloth or a cotton swab dampened with a small amount of thinner (compatible with plastic models) to restore ink flow.
• Storage: Store markers horizontally at room temperature, away from direct sunlight or extreme temperatures.

7. Troubleshooting

7.1. Ink Not Flowing

• Shake and Prime: Ensure the marker has been thoroughly shaken and the tip primed by pressing it gently on scrap paper until ink flows.
• Check for Clogging: If the tip is clogged with dried ink or dissolved paint, refer to the 'Clean Tip' section under Maintenance.

7.2. Paint Dissolving on Surface

This product is primarily designed for direct application over molded plastic parts. When used over existing paint layers (such as Gundam Marker paint, Mr. Color, Gundam Color, or Aqueous Hobby Color), it may dissolve the underlying paint if it exceeds the panel line boundaries. To avoid this, apply carefully and wipe excess quickly. Consider testing on an inconspicuous area first.

8. Specifications

9. Safety Information

• Ventilation: Use in a well-ventilated area to avoid inhaling fumes.
• Keep Out of Reach of Children: This product is not a toy and contains small parts and chemicals.
• Avoid Contact: Prevent contact with eyes and skin. In case of contact, rinse thoroughly with water.
• Flammability: Keep away from open flames and heat sources.

10. Warranty and Support

Specific warranty information for this product is not provided in the available data. For any product-related inquiries or support, please contact the retailer or the manufacturer directly.