MAHANCRIS CTHR28001 39.4'' Narrow Console Table Instruction Manual

1. Introduction

Thank you for choosing the MAHANCRIS 39.4'' Narrow Console Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

Image 1.1: The MAHANCRIS 39.4'' Narrow Console Table, showcasing its rustic brown finish and octagonal metal frame.

2. Safety Information

To ensure safe use of this product, please observe the following guidelines:

• Do not allow children to climb on the table. This product is not designed for climbing and could result in injury.
• Always use the provided anti-tip kit to secure the table to a wall. This prevents accidental tipping, especially in households with children or pets.
• Follow all assembly instructions carefully. Incorrect assembly can lead to instability and potential hazards.
• Do not exceed the maximum weight capacity of 66 pounds for the tabletop and 22 pounds per lower shelf.
• Place the table on a flat, stable surface. Adjust the feet as necessary to ensure stability.
• Keep small parts and packaging materials away from children during assembly.

3. Package Contents

Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• 1 x Console Table (Main structure)
• 1 x Accessory Kit (Hardware, screws, etc.)
• 1 x Anti-Tip Kit (Wall anchor, strap)
• 1 x Instructions Manual (This document)

4. Assembly Instructions

Assembly is designed to be straightforward. It is recommended to assemble the table on a soft, clean surface to prevent scratches. All necessary tools are included.

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out and identify each piece using the provided parts list.
2. Attach Adjustable Feet: Screw the adjustable feet into the bottom of the main metal frame. Ensure they are securely tightened.
3. Assemble Metal Frame: Connect the various sections of the octagonal metal frame using the screws and Allen key from the accessory kit. Do not fully tighten screws until all parts are aligned.
4. Install Shelves: Place the rustic brown shelves into their designated positions within the metal frame. Secure them with the appropriate screws.
5. Attach Top Panel: Position the main tabletop onto the assembled frame and secure it using the provided screws.
6. Tighten All Screws: Once all components are in place and aligned, fully tighten all screws.
7. Install Anti-Tip Kit: Attach the anti-tip strap to the back of the table and secure it to a wall stud using the provided hardware. This step is crucial for stability and safety.

Image 4.1: Diagram showing the dimensions of the console table, including overall height, width, depth, and shelf spacing.

Image 4.2: Close-up of the adjustable feet, illustrating their function for leveling the table and protecting floors.

Image 4.3: Detail of the 1.58-inch thick reinforced top panel, highlighting its robust construction.

5. Usage and Placement

This console table is designed for indoor use in various settings such as entryways, living rooms, or hallways. Its narrow design makes it suitable for smaller spaces.

• Use the top surface for decorative items, lamps, or frequently accessed items.
• The four tiers of shelves provide storage for books, small decor, or other personal belongings.
• Ensure the table is placed against a wall and secured with the anti-tip kit for maximum stability.

Image 5.1: The console table positioned in a living room, demonstrating its use as a decorative and functional piece.

Image 5.2: The console table serving as an entryway table, holding various items.

6. Maintenance and Care

Proper care will extend the life and appearance of your console table.

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
• Spills: Clean spills immediately to prevent staining, especially on the engineered wood surfaces.
• Heat and Moisture: Avoid placing hot items directly on the surface. Use coasters or protective pads. Protect from excessive moisture.
• Sunlight: Prolonged exposure to direct sunlight may cause fading or discoloration.
• Stability Check: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.

7. Troubleshooting

If you encounter any issues, refer to the following common solutions:

• Table is wobbly:
  • Ensure all screws are fully tightened.
  • Adjust the leveling feet on the bottom of the frame to compensate for uneven floors.
• Parts do not fit during assembly:
  • Double-check the assembly instructions and diagrams to ensure parts are oriented correctly.
  • Do not overtighten screws until all parts are loosely assembled and aligned.
  • Verify that you have the correct parts for each step.
• Scratches on surface:
  • Minor scratches may be touched up with a furniture repair marker matching the rustic brown finish.
  • Prevent future scratches by using protective pads under items placed on the table.

8. Specifications

9. Warranty and Support

MAHANCRIS is committed to providing quality products. For warranty information, missing parts, or any questions regarding your console table, please contact MAHANCRIS customer support through the retailer where the product was purchased. Please have your model number (CTHR28001) and purchase date available when contacting support.

For further assistance, you may visit the MAHANCRIS Store on Amazon.