Introduction
Thank you for choosing the Sharper Image 9" Mini Automatic Candy Dispenser. This compact, touch-activated countertop candy machine is designed for convenient and hygienic dispensing of small snacks. Please read this manual thoroughly to ensure proper setup, operation, and maintenance of your new dispenser.
Key features include:
- Touch-Activated and Contactless Dispensing: Enjoy a quick, hygienic treat by tapping the sensor under the chute. The automatic mini candy dispenser delivers an exact portion of candy or snacks with no scoops or messy hands. Designed for unwrapped candies and small snacks, it provides a clean, hands-free way to enjoy treats.
- Compact Countertop Design: Only 9 inches tall, this mini gumball-style candy machine fits anywhere: kitchen counter, office desk, dorm shelf or party table. Stylish enough to double as a decorative candy jar.
- Optimal Size For Small Snacks and Candy: The Sharper Image Mini Candy Dispenser has a 0.5-liter capacity, holding about 2 cups (16 oz) of candy or nuts. Works best with unwrapped pieces 10mm or smaller, such as gumballs, jellybeans, peanuts, trail mix, or cereal. Avoid irregular shapes for smooth, jam-free operation.
- Hygienic and Easy Maintenance: Keep treats and snacks cleaner with this hands-free design. When it’s time to refill or clean, the dispenser easily twists apart for washing and reassembly. The motion sensor can be turned off when not in use for extra control, and the easy-fill chamber ensures quick, mess-free refills every time.
Setup
1. Unpacking and Assembly
Carefully remove all components from the packaging. Ensure all parts are present before proceeding. The dispenser consists of a base, a clear candy reservoir, and a top lid. The unit is designed to twist apart for easy assembly and cleaning.
Image: The Sharper Image Mini Candy Dispenser shown in its original retail packaging, indicating a new product ready for unboxing.
2. Battery Installation
The dispenser is battery-powered for cordless operation. Locate the battery compartment, typically on the underside of the base. Insert the required batteries (not included) according to the polarity indicators. Close the battery compartment securely.
3. Filling the Dispenser
Twist off the top lid of the dispenser. Fill the clear reservoir with your desired unwrapped candies or small snacks. The capacity is approximately 0.5 liters (2 cups or 16 oz). For optimal performance, use items 10mm or smaller, such as gumballs, jellybeans, peanuts, trail mix, or cereal. Avoid irregular shapes to prevent blockages. Replace the lid securely after filling.
Image: The Sharper Image Mini Candy Dispenser, fully assembled and filled with various jellybeans, ready for use. A hand is shown below the dispensing chute.
Operating Instructions
1. Powering On/Off
Locate the power switch or sensor control on the dispenser. Turn the unit ON to activate the motion sensor. The motion sensor can also be turned OFF when not in use to conserve battery life or prevent accidental dispensing.
2. Dispensing Candy
Place your hand or a small bowl directly under the dispensing chute. The touch-activated sensor will detect your presence and automatically dispense a portion of the contents. Remove your hand to stop dispensing.
Image: A close-up of a hand positioned under the dispenser, catching a stream of colorful jellybeans as they are dispensed.
3. Optimal Usage Tips
- For best results, use unwrapped candies or snacks that are 10mm or smaller.
- If using irregular-shaped items, only fill the reservoir halfway to minimize potential blockages.
- Ensure the sensor area is clear of obstructions for consistent operation.
Video: This video demonstrates the Sharper Image Mini Automatic Candy Dispenser in an office setting, highlighting its ease of use and suitability for various small candies and snacks.
Video: An honest review showcasing the functionality and features of the Mini Automatic Candy Dispenser, including how it dispenses various types of candy.
Maintenance
1. Cleaning
The dispenser is designed for easy cleaning. To clean, twist the unit apart. Hand wash all internal pieces with mild soap and water. Do not use abrasive cleaners or place any part of the dispenser in a dishwasher, as it is not dishwasher safe. Ensure all parts are completely dry before reassembly.
2. Refilling
When the candy level is low, simply twist off the top lid and refill the reservoir. Ensure the contents are suitable for dispensing (10mm or smaller, unwrapped). Replace the lid firmly.
Troubleshooting
Refer to the following table for common issues and their solutions:
Image: A detailed troubleshooting guide outlining common problems such as candy not dispensing, sensor not working, and inconsistent dispensing, along with their respective solutions.
| Problem | Solution |
|---|---|
| The candy is not dispensing. |
|
| The sensor is not working. |
|
| The amount dispensed is inconsistent. |
|
Specifications
- Product Dimensions: 6"L x 6"W x 9"H
- Recommended Uses: Candy, Jelly Beans, Nuts, Trail Mix
- Special Feature: Reusable
- Container Shape: Rectangular Prism
- Closure Type: Screw Top
- Dishwasher Safe: No
- Item Weight: 1.1 Pounds
- Product Care Instructions: Hand Wash Only
- Item Volume: 0.5 Liters
- Unit Count: 1.0 Count
- Microwaveable: No
- Manufacturer: Merchsource
- Number of Items: 1
- Specific Uses: Desktop Candy Dispenser, Party Favor
- Size: 9"
- UPC: 843479165180
- Lid Material: Plastic
- Item Model Number: 1010253
- Date First Available: March 25, 2019
- Brand: Sharper Image
- Color: Black
- Material: Plastic
- Material Feature: Reusable
- Capacity: 0.5 Liters
Warranty and Support
For warranty information or customer support, please refer to the product packaging or contact Sharper Image customer service directly. Keep your purchase receipt for any warranty claims.
