1. Introduction
This document provides comprehensive instructions for the GROSERY Shower Base Tray. This modern and durable shower pan is designed for bathroom installations, featuring a low-profile design, SMC (Sheet Molding Compound) construction, and a skid-resistant surface for enhanced functionality and safety.
2. Safety Information
- Always wear appropriate personal protective equipment (PPE) during installation, including safety glasses and gloves.
- Ensure all local plumbing and building codes are strictly followed during installation.
- If you are unsure about any installation step or procedure, consult a qualified plumbing professional.
- Handle the shower tray with care to prevent damage or injury.
3. Package Contents
Verify that all components are present and undamaged before beginning installation.
- 1 x GROSERY Shower Base Tray (35.4" x 35.4" Gray)
Note: The drain assembly is not included and must be purchased separately to match your plumbing requirements.
4. Setup and Installation
Proper installation is crucial for the longevity and performance of your shower base tray.
4.1. Preparation
- Ensure the subfloor where the shower tray will be installed is level, clean, dry, and structurally sound.
- Verify that the plumbing for the drain is correctly positioned and accessible according to the shower tray's drain opening location.
- Clear the installation area of any debris or obstructions.
4.2. Positioning the Tray
Carefully place the shower base tray in the desired location. Check for proper alignment with walls and ensure it is perfectly level using a spirit level. Adjust as necessary.
Image 1: Top-down view of the GROSERY Shower Base Tray, highlighting its square shape and the integrated drain cover.
4.3. Drain Connection
- Connect the standard 3.5-inch drain opening of the shower tray to your existing plumbing system.
- Ensure a watertight seal using appropriate plumbing sealant and gaskets, following the drain manufacturer's instructions.
- Do not overtighten connections, as this may cause damage.
Image 2: Technical diagram illustrating the dimensions of the GROSERY Shower Base Tray, including its 90 cm x 90 cm footprint and the circular drain opening within a rectangular floor drain area.
4.4. Securing the Tray
Secure the shower base tray to the subfloor using appropriate adhesive or mortar as recommended by local building codes or specific product guidelines. Ensure full contact between the tray base and the subfloor for maximum stability.
4.5. Testing
Before proceeding with wall installation or tiling, perform a leak test. Fill the tray with water and allow it to sit for a period, then check all drain connections and surrounding areas for any signs of leakage. Address any leaks immediately.
5. Operating Instructions
The GROSERY Shower Base Tray is designed for daily shower use. Its low threshold facilitates easy and safe entry and exit. The slate stone surface provides inherent skid resistance, contributing to user safety during showering.
Image 3: Front-facing view of the GROSERY Shower Base Tray, demonstrating its low-profile design and gray color.
6. Maintenance
Regular maintenance will help preserve the appearance and functionality of your shower base tray.
- Cleaning: Clean the shower tray regularly with mild, non-abrasive cleaners and a soft cloth or sponge. Avoid harsh chemicals, abrasive pads, or scouring agents that could damage the SMC surface.
- Drain Care: Periodically remove and clean the drain cover and any accessible parts of the drain assembly to prevent hair and soap scum buildup, which can lead to blockages.
- Inspection: Routinely inspect the tray for any signs of wear, cracks, or damage. Address any issues promptly to maintain the product's integrity and prevent potential leaks.
7. Troubleshooting
Refer to the following common issues and their potential solutions.
- Leaking: If leaks occur, re-check all drain connections and seals for proper installation. Ensure the tray is properly leveled and secured to the subfloor.
- Slow Drainage: If water drains slowly, check for blockages in the drain assembly. Remove the drain cover and clear any accumulated debris. Ensure the tray's inherent slope towards the drain is not compromised.
- Surface Stains: For stubborn stains, use a cleaner specifically designed for SMC or composite materials, following the product's instructions carefully. Test on an inconspicuous area first.
8. Specifications
| Feature | Specification |
|---|---|
| Material | SMC (Sheet Molding Compound) with resin, fiberglass, and stone powder |
| Color | Gray |
| Dimensions (W x D x T) | 35.4" x 35.4" x 1" (90 cm x 90 cm x 2.6 cm) |
| Floor Drain Size (W x D) | 7.9" x 4.9" (20 cm x 12.5 cm) |
| Drain Opening Diameter | Standard 3.5" (9 cm) |
| Key Features | Low threshold, reinforced for durability, skid-resistant slate stone surface, scratch- and stain-resistant, easy to clean |
9. Warranty and Support
For specific warranty information, terms, and conditions, please refer to the documentation provided at the time of purchase or contact GROSERY customer service directly. Technical support and assistance with product-related inquiries can be obtained through your purchase platform or the official GROSERY website.
