Shiptree Wireless Controller User Manual

Introduction

Thank you for choosing the Shiptree Wireless Controller. This high-performance game controller is designed for seamless compatibility with PS-4, PS-4 Slim, and PS-4 Pro consoles. It features advanced functionalities such as dual vibration, a 6-axis gyro sensor, a responsive touch panel, and a 3.5mm audio jack, providing an immersive gaming experience. Additionally, it includes two programmable buttons and a Turbo function for enhanced gameplay customization. Please read this manual carefully to ensure proper use and maintenance of your controller.

Figure 1: Front view of the Shiptree Wireless Controller.

Package Contents

Please check the package contents upon unboxing to ensure all items are present.

• 1 x Shiptree Wireless Controller
• 1 x USB Charging Cable (1.0M)
• 1 x User Manual

Figure 2: Front of the Shiptree Wireless Controller retail box, showing the controller, USB cable, and manual icons.

Setup and Initial Connection

First-Time Pairing with PS-4 Console

1. Ensure your PS-4 console is powered on.
2. Connect the Shiptree Wireless Controller to your PS-4 console using the provided USB charging cable.
3. Press the "PS" button (Home button) on the controller. The light bar on the controller will flash and then glow steadily, indicating successful pairing.
4. Once paired, you can disconnect the USB cable to use the controller wirelessly. The controller will automatically connect via Bluetooth for future use.

Charging the Controller

The controller has a built-in 800mAh rechargeable battery.

• Connect the controller to your PS-4 console or a standard USB charger (5V/1A) using the provided USB cable.
• The light bar will slowly flash orange during charging.
• The light bar will turn off when fully charged. A full charge takes approximately 3 hours.
• A fully charged controller provides approximately 8-10 hours of continuous gameplay.

Figure 3: Controller connected via USB cable, illustrating key features.

Figure 4: Battery life and charging time details.

Operating Instructions

Basic Controls

The Shiptree Wireless Controller features standard PS-4 button layouts, including:

• Directional Pad (D-Pad): For directional input.
• Action Buttons (Triangle, Circle, Cross, Square): For in-game actions.
• Left and Right Analog Sticks: For precise movement and camera control.
• L1/R1 and L2/R2 Buttons: Shoulder and trigger buttons.
• SHARE Button: For sharing gameplay content.
• OPTIONS Button: For in-game menus and options.
• PS Button (Home Button): To access the PS-4 home screen.
• Touchpad: A responsive multi-touch surface for specific game interactions.
• 3.5mm Audio Jack: For connecting headphones or headsets.

Figure 5: High-sensitivity touchpad for interactive gameplay.

Advanced Features

6-Axis Gyroscope & Dual Vibration

The controller integrates a 6-axis gyroscope for precise motion sensing, enhancing immersive gameplay. Built-in dual vibration motors provide tactile feedback, reacting accurately to in-game events like explosions, impacts, and environmental effects.

Figure 6: Experience enhanced immersion with dual vibration and 6-axis motion control.

Turbo Function

The Turbo function allows for rapid, automatic button presses, which can be useful in certain games.

• To activate Turbo: Press and hold the Turbo button (located below the touchpad) and then press the desired action button (e.g., X, O, Square, Triangle, L1, R1, L2, R2). The button will now rapidly repeat its input when held down.
• To deactivate Turbo: Repeat the same process (hold Turbo button and press the action button again).

Figure 7: The Turbo function button for rapid input.

Macro Programming (Assignable Advanced Buttons)

The controller features two programmable buttons on the back (often referred to as L3/R3 or paddle buttons). These can be assigned to perform complex sequences or frequently used button combinations, giving you an edge in gameplay. Up to 12 buttons can be freely combined for macro programming.

• Refer to the detailed instructions in the included physical user manual for specific steps on how to program these buttons, as the process can vary.

Figure 8: Assignable advanced buttons on the back of the controller.

Maintenance and Care

• Cleaning: Use a soft, dry cloth to clean the controller. For stubborn dirt, slightly dampen the cloth with water. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the controller frequently. If storing for an extended period, charge the battery to about 50% every few months.
• Handling: Avoid dropping the controller or subjecting it to strong impacts, as this can damage internal components.

Troubleshooting

Specifications

Warranty and Support

Shiptree products are manufactured with high quality standards. For information regarding warranty coverage and support, please refer to the warranty card included with your purchase or visit the official Shiptree website.

If you encounter any issues not covered in the troubleshooting section, or require further assistance, please contact Shiptree customer support through the contact information provided on the product packaging or official website.