RoRoSkin V21 3-in-1 Wireless Charging Station User Manual

Introduction

Thank you for choosing the RoRoSkin V21 3-in-1 Wireless Charging Station. This device is designed to efficiently charge your compatible iPhone, Apple Watch, and AirPods simultaneously. It features Qi2 certification for 15W fast charging and a foldable design for portability. Please read this manual thoroughly before use to ensure proper operation and to maximize the product's lifespan.

Safety Information

To prevent injury or damage to your device, please observe the following safety precautions:

Do not disassemble, modify, or repair the device.
Keep the device away from water, moisture, and high temperatures.
Avoid dropping or subjecting the device to strong impacts.
Use only a compatible power adapter (30W or above USB-C PD wall charger recommended).
Ensure proper ventilation during use to prevent overheating.
This charging station incorporates Over Heat Protection, Over Surge Protection, Over Charge Protection, and Short Circuit Protection for enhanced safety.

Diagram showing four safety protection icons: Over Heat Protection, Over Surge Protection, Over Charge Protection, Short Circuit Protection.

Image: Safety features of the RoRoSkin V21 charging station, including protection against overheating, power surges, overcharging, and short circuits.

Package Contents

Verify that all items are present in your package:

1 x RoRoSkin V21 3-in-1 Qi2 Magnetic Wireless Charger
1 x USB-C to C Charging Cable
1 x User Manual (this document)

Image showing the RoRoSkin V21 charging station in various modes, along with a list of included items: 1x 3-in-1 Qi2 Magnetic Wireless Charger, 1x Fast USB A to C Charging cable, 1x User Manual.

Image: The RoRoSkin V21 charging station and its included accessories, including the charging cable and user manual.

Setup Guide

Connect Power Adapter: Connect the provided USB-C to C charging cable to the charging station's input port.
Power Source: Connect the other end of the USB-C cable to a 30W or above USB-C Power Delivery (PD) wall charger (not included). Using an adapter with less than 30W may result in suboptimal charging performance or inability to charge all devices simultaneously.
Power On: Once connected, the indicator light on the charging station will illuminate, indicating it is ready for use.

Diagram illustrating the requirement for a power adapter greater than 30W for optimal charging efficiency, showing a red X for <30W adapters and a green check for >30W adapters.

Image: Illustration emphasizing the use of a 30W or higher power adapter for optimal charging performance.

Operating Instructions

1. Charging Your iPhone (MagSafe Compatible)

Ensure your iPhone is MagSafe compatible (iPhone 12 series or later).
For optimal 15W fast charging, update your iPhone's operating system to iOS 17.5 or higher.
Align your iPhone with the magnetic charging pad. The strong magnets will secure your device in place.
The charging indicator on your iPhone screen will confirm charging has begun.
Only compatible with MagSafe phone cases. Non-MagSafe cases may hinder magnetic connection and charging efficiency.

The RoRoSkin V21 3-in-1 Wireless Charging Station actively charging an iPhone, Apple Watch, and AirPods simultaneously. The iPhone is magnetically attached in portrait mode.

Image: The RoRoSkin V21 charging station in use, demonstrating simultaneous charging of an iPhone, Apple Watch, and AirPods.

Graphic illustrating that the RoRoSkin V21 charges iPhone 2X faster with 15W ultra-fast charging compared to traditional 5W-7.5W chargers, with a note about iOS 17.5+ requirement.

Image: Comparison showing 2X faster iPhone charging with the 15W Qi2 certified station.

2. Charging Your Apple Watch

Unfold the Apple Watch charging module.
Place your Apple Watch (compatible with Series 2-10, SE, Ultra/Ultra 2) onto the charging module.
Ensure the watch is properly seated and the charging icon appears on its screen.
The watch charger provides up to 2.5W of power.

Graphic showing fast charging for Apple Watch, indicating 50% charge in 45 minutes, ideal for pre-bedtime charging.

Image: Information on Apple Watch charging speed, achieving 50% charge in approximately 45 minutes.

3. Charging Your AirPods

Place your AirPods charging case (compatible with AirPods 2/3/4/Pro/Pro 2 with wireless charging case) onto the designated charging area at the base of the station.
Ensure the case is centered on the charging area. The indicator light on the AirPods case will confirm charging.
Note: This charger does not support AirPods 2/3/4 charging cases with model numbers A3058, A2897, or A1602. Please verify your AirPods case model for compatibility.
The AirPods charger provides up to 3W of power.

Image highlighting the large non-slip earbuds charging area, with a note about specific AirPods case model incompatibilities (A3058, A2897, A1602).

Image: The dedicated non-slip charging area for AirPods, with a reminder about specific incompatible AirPods case models.

4. Adjustable Stand and Foldable Design

The main charging pad for iPhone can be adjusted to various angles (0°-65°) and rotated 360° for optimal viewing in portrait or landscape mode.
The entire charging station can be folded flat for compact storage and easy portability, making it suitable for travel.

Diagram showing the RoRoSkin V21's fully adjustable stand, capable of 360-degree rotation and 0-65 degree tilt for comfortable viewing angles.

Image: Demonstrating the adjustable stand features, including rotation and tilt angles.

Image illustrating the ultra-compact design of the RoRoSkin V21, showing its dimensions (4.8 x 2.76 x 0.98 inches) and weight (272g), along with various folded and unfolded configurations.

Image: The compact and foldable design of the charging station, highlighting its dimensions and portability.

Maintenance

Keep the charging station clean by wiping it with a soft, dry cloth.
Avoid using abrasive cleaners or solvents.
Store the device in a cool, dry place when not in use.

Troubleshooting

Issue	Possible Cause	Solution
Device not charging or charging slowly.	Incompatible or insufficient power adapter. Device not properly aligned. Thick or non-MagSafe phone case. Outdated iOS version (for 15W charging).	Use a 30W or above USB-C PD wall charger. Ensure the device is centered and magnetically secured. Remove thick cases or use a MagSafe compatible case. Update iPhone to iOS 17.5 or higher.
Apple Watch or AirPods disconnects during charging.	Improper placement. Specific AirPods case model incompatibility. Power fluctuations from adapter.	Ensure devices are firmly seated on their respective charging areas. Verify AirPods case model (A3058, A2897, A1602 are not supported). Confirm power adapter meets 30W+ PD specification.
Charging station indicator light is off.	No power supply. Faulty cable or adapter.	Check power connection to wall outlet and charging station. Try a different USB-C cable or power adapter.
Device or charger feels warm during charging.	Normal operation for wireless charging. Poor ventilation or high ambient temperature. Using apps while charging.	Slight warmth is normal. Ensure adequate airflow around the charger. Avoid heavy device usage during charging if excessive heat is observed.

Specifications

Model: V21
Input: Requires 30W or above USB-C PD adapter (not included)
iPhone Output: Up to 15W (Qi2 Certified, MagSafe compatible)
Apple Watch Output: Up to 2.5W
AirPods Output: Up to 3W
Dimensions (Folded): Approximately 4.8 x 2.76 x 0.98 inches (12.2 x 7 x 2.5 cm)
Item Weight: 12 ounces (340 grams)
ASIN: B0DHZC58XT
Manufacturer: Shenzhen Itian Technology Co., Ltd.
Date First Available: September 26, 2024

Warranty and Support

RoRoSkin is committed to providing high-quality products. For any questions, concerns, or support needs regarding your V21 Wireless Charging Station, please contact our customer service team through the retailer where you purchased the product. Please retain your proof of purchase for warranty claims.

For more information, you may visit the RoRoSkin Store on Amazon.

RoRoSkin V21