Aitjunz 26" Tall 2 Drawers Dresser for Bedroom
Aitjunz 26" Tall 2 Drawers Dresser / Nightstand User Manual
Model: 26" Tall 2 Drawers Dresser for Bedroom
Product Overview
The Aitjunz 26" Tall 2 Drawers Dresser is a versatile furniture piece designed for bedrooms and living rooms, functioning as both a dresser and a nightstand. It features a farmhouse style with Roman column legs, offering both aesthetic appeal and practical storage. A key feature is its integrated charging station, providing convenient power access for your electronic devices.
Figure 1: Overall view of the Aitjunz 2-Drawer Dresser/Nightstand.
Product Dimensions
Understanding the dimensions of your new dresser/nightstand is crucial for proper placement and assembly. Below are the detailed measurements:
- Overall Dimensions: 15.5"D x 23.6"W x 26"H
- Open Shelf Dimensions: 7"H x 13.2"L x 21.3"W
Figure 2: Detailed product dimensions.
Setup and Assembly
Your Aitjunz dresser/nightstand is designed for straightforward assembly. Follow these steps carefully to ensure a stable and functional unit.
Before You Begin:
- Verify all accessories are present and labeled according to the detailed instructions provided in the packaging.
- Clear a spacious area for assembly.
- It is recommended that one person can complete the assembly in approximately 30 minutes.
- Ensure all wooden protection boards and thick foam are removed from packaging.
Assembly Steps:
- Unpack all components and lay them out on a soft, clean surface to prevent scratches.
- Identify the main structural pieces, including the top panel, side panels with Roman columns, and base.
- Follow the numbered steps in the included instruction manual to attach the side panels to the base and top.
- Assemble the two drawers according to the instructions, ensuring the center-mounted slides are correctly installed.
- Insert the assembled drawers into their respective slots.
- Install the back panel, ensuring the 2.3-inch diameter cable management hole is correctly positioned for the charging station.
- Securely fasten all screws and connectors. Do not overtighten.
Note: If you encounter any problems during assembly, please refer to the "Warranty and Support" section for assistance.
Operating Instructions
The integrated charging station is a key feature of your Aitjunz dresser/nightstand, providing convenient power for your devices.
Using the Charging Station:
- Locate the power cord extending from the back of the unit.
- Plug the power cord into a standard wall outlet.
- The charging station, located on the top surface, is equipped with:
- Two (2) AC power outlets (125V/12A)
- Two (2) USB ports (5V/2.1A)
- Connect your electronic devices (e.g., smartphones, tablets, lamps, smart home devices) to the appropriate outlets or USB ports for charging.
- Utilize the 2.3-inch diameter cable management hole at the back to keep charging cables neat and organized.
Figure 3: Integrated Charging Station.
Figure 4: Charging station specifications and compatible devices.
Maintenance and Care
Proper care will ensure the longevity and appearance of your Aitjunz dresser/nightstand.
- Cleaning: Wipe the surface with a dry cloth. Avoid abrasive cleaners or harsh chemicals that may damage the wood finish.
- Spills: Immediately wipe up any spills with a soft, dry cloth to prevent staining or water damage.
- Sunlight Exposure: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration of the wood.
- Heat and Moisture: Do not place hot items directly on the surface. Use coasters or protective pads. Avoid excessive moisture.
- Stability Check: Periodically check and tighten all screws and fasteners to maintain stability.
Figure 5: Design elements contributing to durability and stability.
Troubleshooting
If you encounter any issues with your dresser/nightstand, refer to the following common troubleshooting tips:
| Problem | Possible Cause | Solution |
|---|---|---|
| Dresser/Nightstand is wobbly. | Loose fasteners or uneven floor. | Tighten all screws and bolts. Place felt pads or shims under legs if the floor is uneven. |
| Drawers do not slide smoothly. | Misaligned slides or debris in tracks. | Ensure drawer slides are properly aligned and free of obstructions. Apply a silicone-based lubricant if needed. |
| Charging station not working. | Not plugged in, power outage, or faulty device. | Check if the dresser's power cord is securely plugged into a working wall outlet. Test the outlet with another device. Ensure your device's charging cable is functional. |
Specifications
- Brand: Aitjunz
- Model Name: 26" Tall 2 Drawers Dresser for Bedroom
- Product Dimensions: 15.5"D x 23.6"W x 26"H
- Color: Light Grey
- Mounting Type: Flooring Installation
- Room Type: Bedroom, Living Room
- Special Feature: Roman Column, Integrated Charging Station (2 USB ports, 2 AC outlets)
- Furniture Finish: Wood
- Drawer Type: Center Mounted Slide
- Product Care Instructions: Wipe with Dry Cloth
- Assembly Required: Yes
- Number of Pieces: 1
Warranty and Support
Aitjunz is committed to providing high-quality products and customer satisfaction. Your dresser/nightstand comes with support to ensure a positive experience.
Customer Support:
If you encounter any problems during assembly, operation, or have questions about your product, the seller is available to provide a satisfactory solution within 24 hours. Please refer to your purchase documentation for specific contact information or visit the Aitjunz Store on Amazon.
Protection Plans:
Additional protection plans may be available for your product. For details on extended coverage, please refer to the options presented at the time of purchase or check the product page on Amazon.
- 2-Year Protection Plan
- 3-Year Protection Plan
- Complete Protect (monthly plan)
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.