NTW4516FW2

Generic Washer Agitator Dogs Kit Replacement Instruction Manual

Model: NTW4516FW2

1. Introduction

This instruction manual provides detailed guidance for the installation and maintenance of your Generic Washer Agitator Dogs Kit. This kit is designed as a replacement part for various washing machine models from brands such as Kenmore, Admiral, Amana, and Crosley. Proper installation ensures your washing machine's agitator functions correctly, facilitating effective laundry cleaning.

Four white plastic agitator dogs arranged in a cross pattern

Image 1.1: The Washer Agitator Dogs Kit, showing four individual white plastic agitator dogs.

2. Safety Information

Always prioritize safety when performing appliance repairs. Failure to follow these safety guidelines may result in personal injury or damage to your appliance.

Disconnect Power: Before beginning any repair or maintenance, always unplug the washing machine from its power source or turn off the circuit breaker to prevent electrical shock.
Wear Protective Gear: Use work gloves to protect your hands from sharp edges or moving parts.
Follow Instructions: Read all instructions carefully before proceeding. If you are unsure about any step, consult a qualified technician.
Proper Tools: Use the correct tools for the job to avoid damaging parts or causing injury.

3. Package Contents

Your Washer Agitator Dogs Kit typically includes:

4 x Agitator Dogs (white plastic components)

Four white plastic agitator dogs, viewed from above

Image 3.1: A complete set of four agitator dogs as typically included in the kit.

4. Compatibility

This agitator dogs kit is compatible with a wide range of washing machine models. Please verify your washing machine's model number against the list below or consult your appliance's documentation to ensure compatibility. This kit is known to fit various models from:

Kenmore: Including models such as 110.15944401, 110.15952400, 110.15952401, 110.15954400, 110.15954401, 110.15962400, 110.15962401, and many others.
Admiral: Including models such as 2DATW4305TQ0, 3RATW3005TQ0, 3RATW3005TQ1, 3UATW4605TQ0, 4GATW4900YW0, 4GATW4900YW1, 4GATW4900YW2, 4KATW4605TQ0, ATW4300TQ0, ATW4470TQ0, ATW4471TQ0, ATW4475TQ0, ATW4475VQ0, ATW4475VQ1, ATW4475XQ0, ATW4516HW0.
Amana: Including models such as 1DNET3205TQ0, 4GNTW4400YQ0, 4GNTW4400YQ1, 4GNTW4600YQ0, 4GNTW4600YQ1, 4KNTW5705TQ0, 7MNTE1000TQ0, 7MNTE1000TT0, 7MNTH8000TQ0, 7MNTM5000TQ0, 7MNTM5000TT0, 7MNTM5100TQ0, 7MNTM5100TT0, NTW4500VQ0, NTW4500VQ1, NTW4500XQ0, NTW4501XQ0, NTW4516FW2, NTW4516FW3, NTW4600VQ0, NTW4600VQ1, NTW4600XQ0, NTW4601XQ0W, NTW4665GW0, NTW4700YQ0, NTW4700YQ1, NTW4800VQ0, NTW4800VQ1, NTW4800XQ0, NTW4880YQ0, NTW5100XQ0, NTW5205TQ0, NTW5245TQ0, NTW5245TQ1, NTW5400TQ0, NTW5400TQ1, NTW5400TQ2, NTW5500TQ0, NTW5500TQ1, NTW5505TQ0, NTW5505TQ1, NTW5640TQ0, NTW5700TQ0, NTW5705TQ0, NTW5800TQ0.
Crosley: Including models such as BYCWD6274W0, BYCWD6274W1, BYCWD6274W2, BYCWD6274W3, BYCWD6274W4, CAWS14234VQ0, CAWS16445VQ0, CAWS16445WQ0, CAWS522TQ0, CAWS729MQ0, CAWS729MQ1, CAWS823JQ0, CAWS833RQ0, CAWS833RQ1, CAWS833RT0, CAWS833RT1, CAWS833SQ0, CAWS833ST0, CAWS923MQ0, CAWS923MQ1, CAWS953RB1, CAWS953RQ0, CAWS953RQ1, CAWS954SB0, CAWS954SQ0, CAWS966RQ0, CAWS966RQ1, CAWSS16445WQ0, CAWX629JQ0, CAWX629JQ1, CAWX700MQ0, CSWS16445WQ0.

If your specific model number is not listed, please contact customer support for assistance in verifying compatibility.

5. Installation Instructions

Replacing agitator dogs is a common repair for top-load washing machines. Follow these steps carefully:

Disconnect Power: Unplug the washing machine from the electrical outlet. This is a critical safety step.
Remove Agitator Cap: Locate the agitator cap at the top center of the agitator. This cap may simply pull off, or it might be secured with a screw. Remove it to expose the agitator bolt.
Remove Agitator Bolt: Use a socket wrench with an extension to loosen and remove the agitator bolt. This bolt is typically located at the bottom of the agitator's center post.
Remove Agitator: Carefully pull the agitator straight up and out of the washer tub. It may require some force or wiggling. If it's stuck, you might need an agitator removal tool.
Access Agitator Dogs: Once the agitator is removed, turn it upside down. You will see the cam assembly, which houses the agitator dogs. The agitator dogs are small plastic pieces that engage with the transmission shaft.
Replace Old Agitator Dogs: Pry out the old, worn-out agitator dogs from their slots. They might be broken or severely worn. Clean any debris from the cam assembly.
Install New Agitator Dogs: Insert the new agitator dogs into their respective slots in the cam assembly. Ensure they are seated correctly and can pivot freely. There are typically four dogs.
Reassemble Agitator: Carefully lower the agitator back onto the transmission shaft, aligning the splines. Push it down firmly until it seats properly.
Reinstall Agitator Bolt and Cap: Reinsert and tighten the agitator bolt. Do not overtighten. Replace the agitator cap.
Reconnect Power: Plug the washing machine back into the electrical outlet.

Close-up of a single white plastic agitator dog

Image 5.1: A close-up view of one agitator dog, highlighting its design for proper engagement.

Four white plastic agitator dogs arranged in a line

Image 5.2: The four agitator dogs shown in a linear arrangement, illustrating their individual shape.

6. Operating Your Washer After Replacement

After successfully installing the new agitator dogs, perform a test cycle to ensure proper operation:

Small Load Test: Start with a small load of laundry or an empty cycle.
Observe Agitation: During the wash cycle, observe the agitator's movement. It should rotate vigorously, moving the clothes through the water.
Listen for Unusual Noises: Pay attention to any grinding, clicking, or unusual noises that were not present before the repair.

If the agitator is not moving or making excessive noise, refer to the Troubleshooting section.

7. Maintenance

Agitator dogs are wear-and-tear parts. While they do not require regular maintenance, understanding their function can help prolong their life and the efficiency of your washing machine:

Avoid Overloading: Overloading your washing machine can put excessive strain on the agitator and its components, leading to premature wear of the agitator dogs.
Check for Foreign Objects: Periodically check the agitator area for small items that may have fallen into the tub and could interfere with agitator movement.
Regular Inspection: If you notice a decrease in agitation effectiveness, it may be time to inspect the agitator dogs for wear.

8. Troubleshooting

If you encounter issues after replacing the agitator dogs, consider the following:

Problem	Possible Cause	Solution
Agitator not moving or weak agitation	Agitator dogs not installed correctly or still worn.	Re-check installation of agitator dogs. Ensure they are fully seated and pivot freely. Verify the agitator bolt is tightened.
Grinding or clicking noise during agitation	Agitator dogs not seated properly, or other internal agitator components are damaged.	Disassemble and inspect the agitator cam assembly. Ensure no foreign objects are present. If noise persists, other parts of the transmission may be faulty.
Water not draining or spinning	Unrelated to agitator dogs.	Check drain pump, lid switch, or motor coupling. This issue is not typically caused by agitator dogs.

9. Specifications

Part Type: Washer Agitator Dogs Kit
Material: Durable Plastic
Quantity: 4 pieces per kit
Manufacturer: Generic
Item Model Number: NTW4516FW2
ASIN: B0DHS4DZF2

10. Warranty and Support

Your purchase is backed by a commitment to quality and customer satisfaction.

Money Back Guarantee: A 90-day money-back guarantee is offered from the date of purchase if you are not satisfied with the product.
Customer Support: For any questions regarding compatibility, installation, or troubleshooting, please contact customer support. We aim to resolve your inquiries within 24 hours.