anoutway 20 PSI Rechargeable Electric SUP Air Pump

Introduction

Thank you for choosing the anoutway 20 PSI Rechargeable Electric SUP Air Pump. This portable and powerful pump is designed for efficient inflation and deflation of various inflatables, including paddleboards, kayaks, and inflatable tents. Its intelligent dual-stage operation and automatic shut-off feature ensure precise and hassle-free use, making your outdoor adventures more enjoyable.

Key features include lightning-fast inflation, a robust rechargeable battery, an automatic cooling system, and a compact, lightweight design for easy transport.

Safety Information

Please read all safety instructions carefully before operating the pump. Failure to follow these instructions may result in injury or damage to the product.

• Do not operate the pump in wet conditions or immerse it in water.
• Keep out of reach of children. This is not a toy.
• Ensure the correct nozzle is used for the inflatable item to prevent over-inflation or damage.
• Do not block the inflation or deflation ports during operation.
• Avoid prolonged continuous operation. Allow the pump to cool down if it becomes excessively warm.
• Do not attempt to disassemble or repair the pump yourself. Contact customer support for assistance.
• Use only the provided charging cable and power sources (battery or 12V DC).

Package Contents

Verify that all items are present in the package:

• anoutway Electric Air Pump
• Air Hose
• Multiple Nozzle Adapters (various types for different valves)
• USB-C Charging Cable
• 12V DC Car Power Cable
• User Manual (this document)

Figure 1: Package Contents. The image displays the main pump unit, the flexible air hose, a USB-C charging cable, and a selection of different nozzle adapters for various inflatable valves.

Product Overview

Familiarize yourself with the components and controls of your anoutway electric air pump.

Figure 2: Front View and Accessories. This image shows the main unit of the anoutway pump, highlighting its digital display, control buttons, and the array of included nozzle adapters at the bottom.

Figure 3: Control Panel. A detailed view of the pump's interface, indicating the '+' (pressurizing), '-' (decompressing), '⇌' (alter/unit change), and power (on/off) buttons, along with the digital pressure display.

Main Components:

• Digital Display: Shows current pressure and target pressure.
• Control Buttons:
  • +: Increase target pressure.
  • -: Decrease target pressure.
  • ⇌: Switch between pressure units (PSI/BAR).
  • ⏻: Power On/Off and Start/Stop inflation/deflation.
• Inflation Port: Connect the hose for inflation.
• Deflation Port: Connect the hose for deflation.
• Carry Handle: For easy portability.
• Cooling Vents: Integrated active cooling system to prevent overheating.

Setup

Charging the Pump:

Before first use, fully charge the pump's internal battery. The pump can be charged via the included USB-C cable or the 12V DC car power cable.

• Connect the USB-C cable to the pump's charging port and to a compatible USB power adapter (not included) or a 12V DC car outlet using the provided adapter.
• A full charge typically takes approximately 3 hours using QC3.0 fast charging.
• The battery indicator on the display will show charging progress.

Figure 4: Charging the Pump. The image illustrates the pump connected to a wall outlet via its charging cable, indicating the charging process.

Attaching the Hose and Nozzles:

Select the appropriate nozzle adapter for your inflatable item. The pump comes with multiple adapters to fit various valve types.

• Twist the desired nozzle adapter onto the end of the air hose until secure.
• For inflation, connect the other end of the hose to the Inflation Port on the pump.
• For deflation, connect the other end of the hose to the Deflation Port on the pump.

Operating Instructions

Inflation Process:

1. Ensure the pump is charged and the correct nozzle is attached to the hose.
2. Connect the hose to the Inflation Port on the pump.
3. Insert the nozzle firmly into the valve of your inflatable item.
4. Press the power button (⏻) to turn on the pump. The display will light up.
5. Use the + and - buttons to set your desired target pressure (PSI or BAR). Press ⇌ to switch units.
6. Press the power button (⏻) again to start inflation.
7. The pump will operate in a dual-stage process:
   • Stage 1 (High Volume): Rapidly inflates to a lower pressure (approx. 400 L/min) to quickly fill the inflatable's volume.
   • Stage 2 (High Pressure): Automatically switches to a higher pressure mode (approx. 80 L/min) to reach the set target pressure.
8. The pump will automatically shut off once the target pressure is reached.
9. Remove the nozzle from the inflatable valve and disconnect the hose from the pump.

Figure 5: Fast Inflation. The pump connected to a paddleboard, demonstrating its ability to inflate a 10.6ft SUP to 12 PSI in 7.5 minutes or 15 PSI in 9.5 minutes.

Figure 6: Automatic Dual-Stage Inflation. This diagram visually explains how the pump first uses a high-volume stage (400 L/min) and then switches to a high-pressure stage (75 L/min) to achieve the desired PSI, with an automatic shut-off feature.

Deflation Process:

The pump can also be used to quickly deflate items, making packing up easier.

1. Connect the hose to the Deflation Port on the pump.
2. Insert the nozzle firmly into the valve of your inflatable item.
3. Press the power button (⏻) to turn on the pump.
4. Press the power button (⏻) again to start deflation.
5. Allow the pump to run until the inflatable is fully deflated.
6. Remove the nozzle and disconnect the hose.

Figure 7: Inflation and Deflation Ports. This image highlights the distinct ports on the pump for both inflation (green arrow) and deflation (blue arrow), indicating the direction of air movement.

Multi-Scenario Application:

The anoutway pump is versatile and can be used for a wide range of inflatable products thanks to its various nozzle adapters.

Figure 8: Versatile Applications. A visual representation of the pump's compatibility with different inflatable items, including paddleboards, beach balls, tents, kayaks, inflatable wings/kites, and foam mattresses, demonstrating its multi-purpose utility.

Maintenance

Cleaning:

• Wipe the exterior of the pump with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Ensure the inflation and deflation ports are free from dust, sand, or debris. Use a soft brush if necessary.

Storage:

• Store the pump in a cool, dry place away from direct sunlight and extreme temperatures.
• Keep the hose and nozzle adapters organized to prevent loss or damage.
• For long-term storage, it is recommended to charge the battery to about 50-70% every few months to maintain battery health.

Battery Care:

• Avoid completely draining the battery before recharging.
• Do not leave the pump connected to a charger indefinitely after it is fully charged.

Troubleshooting

Specifications

Warranty and Support

For warranty information and technical support, please refer to the contact details provided with your purchase or visit the official anoutway website. Keep your purchase receipt as proof of purchase for any warranty claims.