FUSSWIND Neclune 4-in-1 Shiatsu Neck and Back Massager with Heat

1. Introduction

Thank you for choosing the FUSSWIND Neclune 4-in-1 Massager. This device is designed to provide targeted relief for discomfort in the neck, shoulders, and back. It features an ergonomic design with a 26° angle to support the neck's natural curve, 4D massage heads that mimic human hands, and adjustable settings for a personalized experience. This manual provides essential information for safe and effective use of your massager.

Figure 1: The FUSSWIND Neclune 4-in-1 Massager package, including the main unit, a remote control, a USB-C charging cable, and an eye mask.

2. Safety Information

Please read all safety instructions carefully before using the massager. Failure to follow these instructions may result in injury or damage to the device.

• Ensure the massager's battery and electrical components are not damaged or exposed to moisture.
• Do not use the massager on areas of the body other than the neck, shoulders, back, waist, or legs as intended.
• Avoid using the massager while sleeping or in situations where you might fall asleep.
• Consult a physician before use if you have any pre-existing medical conditions, are pregnant, or have a pacemaker.
• Do not use the massager on swollen, inflamed, or injured skin areas.
• Keep out of reach of children.
• Statements regarding this product have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.

3. Setup

Before first use, ensure the massager is fully charged.

1. Charging: Connect the provided USB-C charging cable to the massager's Type-C interface and to a compatible USB power source. The charging indicator will show the charging status. A full charge typically provides 1-2 hours of continuous use.
2. Remote Control: Ensure the remote control has a working battery.

Figure 2: Key features including the Type-C charging port and remote control.

4. Operating Instructions

The Neclune massager offers a customizable experience with its ergonomic design and various settings.

1. Placement: Position the massager on the desired area (neck, shoulders, back, waist, or legs). The device features a 26° optimal angle for neck support. You can choose between the 'Gentle side' for general neck protection or the 'Steep side' for deeper neck massage.
2. Power On: Press the power button on the massager or the remote control to turn on the device.
3. Adjust Settings:
   • Speed/Intensity: Use the controls to select from 6 adjustable speed and intensity levels. The 4D massage heads mimic human hand kneading.
   • Heat Function: Activate the heating mode for enhanced relaxation and to promote blood circulation. The heating function is designed to relax stiff muscles.
4. Usage Duration: The massager features a 10-minute auto-off function for safety and optimal session length.
5. Power Off: Press the power button again to turn off the device, or it will automatically shut off after 10 minutes.

Figure 3: Proper placement of the massager for neck pain relief and postural support.

Figure 4: Demonstrating the 'Gentle side' and 'Steep side' for varied massage intensity.

Figure 5: Illustration of the heating massage technique and its benefits for circulation.

Figure 6: The 4D massage heads providing a human-like kneading experience with adjustable intensity.

5. Maintenance

Proper maintenance ensures the longevity and optimal performance of your massager.

• Cleaning: Wipe the massager with a soft, slightly damp cloth. Do not use abrasive cleaners or immerse the device in water. Ensure the device is completely dry before storage or next use.
• Storage: Store the massager in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To maintain battery health, avoid fully discharging the battery frequently. Recharge the device regularly, even if not in use for extended periods.

6. Troubleshooting

If you encounter any issues with your massager, please refer to the following common solutions:

• Device Not Turning On: Ensure the massager is fully charged. If the battery is low, connect it to a power source using the USB-C cable.
• No Massage Function: Check if the device is powered on and if the selected intensity level is appropriate. Ensure there are no obstructions to the massage heads.
• No Heat Function: Verify that the heat function is activated. Allow a few minutes for the heating elements to warm up.
• Remote Control Not Working: Check the battery in the remote control and replace it if necessary. Ensure there is no obstruction between the remote and the massager.
• Unusual Noises or Odors: Immediately discontinue use and contact customer support.

If the problem persists after attempting these solutions, please contact FUSSWIND customer support for further assistance.

7. Specifications

8. Warranty and Support

For warranty information or technical support, please contact FUSSWIND customer service. Refer to the product packaging or the official FUSSWIND website for contact details.

Please retain your proof of purchase for any warranty claims.