LanSuper Red Light Therapy Lamp Instruction Manual

Product Overview

The LanSuper Red Light Therapy Lamp is designed for at-home use, combining 660nm red light (visible) and 850nm near-infrared light (invisible) wavelengths. This device features 140 LED beads to deliver light therapy deep into skin tissue. It offers adjustable light intensity levels from 1 to 9 and includes timer settings for 15, 30, or 45 minutes, allowing for customized therapy sessions.

The red light therapy aims to support skin health and address various body areas, providing a convenient solution for personal wellness routines.

Image: Illustration of 660nm red light and 850nm near-infrared light wavelengths penetrating the skin.

Image: Visual representation of potential skin texture and elasticity improvements with consistent use.

Important Safety Information

Before using this device, please read all instructions carefully. Improper use may result in injury or damage. Keep this manual for future reference.

• Eye Protection: Always wear the provided protective goggles during operation to shield your eyes from direct light exposure.
• Consult a Physician: If you have any pre-existing medical conditions, are pregnant, or are taking photosensitizing medications, consult with a healthcare professional before using this device.
• Skin Sensitivity: Perform a patch test on a small area of skin before full treatment to check for any adverse reactions. Discontinue use if irritation occurs.
• Children and Pets: Keep the device out of reach of children and pets.
• Power Source: Use only the provided power adapter. Ensure the power outlet matches the device's voltage requirements.
• Water Exposure: Do not use the device near water or in damp environments.

Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.

What's Included

Carefully unpack your LanSuper Red Light Therapy Lamp and ensure all components are present:

• Red Light Therapy Lamp Head (1)
• Stable Base (1)
• Adjustable Pole Sections (3)
• Controller (1)
• Power Adapter (1)
• Protective Goggles (1 pair)

Image: All components of the LanSuper Red Light Therapy Lamp, including the lamp head, base, pole sections, controller, power adapter, and goggles.

Assembly and Setup

Follow these steps to assemble your red light therapy lamp:

1. Attach Pole Sections: Screw the adjustable pole sections together to achieve your desired height.
2. Secure Base: Attach the assembled pole to the stable base by screwing it firmly into place.
3. Connect Lamp Head: Secure the red light therapy lamp head to the top of the pole. The gooseneck design allows for 360-degree rotation.
4. Connect Controller: Plug the controller cable into the designated port on the lamp.
5. Connect Power: Plug the power adapter into the controller, then plug the adapter into a wall outlet.

Image: Visual guide for assembling the lamp, showing adjustable height and rotating head features.

Image: Close-up of the adjustable pole mechanism, demonstrating how to loosen and tighten for height changes.

Operating Your Device

The intelligent control box allows for easy adjustment of settings:

• Power On/Off: Press the power button to turn the device on or off.
• Adjust Brightness: Use the '+' and '-' buttons to select a brightness level from P01 (lowest) to P09 (highest).
• Set Timer: Press the timer button to cycle through preset times: 15 minutes, 30 minutes, or 45 minutes. The device will automatically shut off after the selected time.
• Reset Timer: Use the 'C' button to reset the timer.

Image: The intelligent control box displaying time and power settings, with buttons for adjustment.

Image: A person using the red light therapy lamp, highlighting the ease of controlling settings.

Recommended Usage

For optimal results, follow these general guidelines:

• Session Duration: Use the device for 10-15 minutes per session.
• Frequency: Apply therapy 3-4 times per week.
• Target Areas: The adjustable design allows for targeted treatment on various body parts, including the face, neck, belly, waist, knees, and elbows.
• Distance: Position the lamp at a comfortable distance from the skin, typically 6-12 inches, ensuring even light distribution over the desired area.

Image: The red light therapy lamp positioned to treat different areas of the body.

Image: Demonstrating the versatility of the lamp for both facial and full body applications.

Care and Maintenance

To ensure the longevity and proper functioning of your device:

• Cleaning: Always unplug the device before cleaning. Use a soft, dry cloth to wipe the lamp head and stand. Do not use abrasive cleaners or immerse any part of the device in water.
• Storage: Store the device in a cool, dry place away from direct sunlight when not in use.
• Handling: Handle the lamp head and gooseneck gently to avoid damage.

Troubleshooting

If you encounter any issues with your LanSuper Red Light Therapy Lamp, refer to the following common solutions:

• Device Not Turning On:
  • Ensure the power adapter is securely plugged into both the device and a working wall outlet.
  • Check if the power button on the controller has been pressed.
• Lights Not Emitting:
  • Verify the device is powered on and the brightness level is set above P00.
  • Confirm the timer is set and has not expired.
• Controller Not Responding:
  • Unplug the power adapter, wait 30 seconds, and plug it back in to reset the controller.

If problems persist, please contact customer support for further assistance.

Product Specifications

Warranty and Customer Support

For any product inquiries, technical support, or warranty claims, please contact LanSuper customer service. Refer to the product packaging or the official LanSuper website for contact information.