SwabTek Cocaine Detection Swabs User Manual

1. Overview

The SwabTek Cocaine Detection Swabs are designed for the presumptive detection of cocaine on any surface or in various samples. This test kit provides a simple, safe, and rapid method for screening suspected substances.

Key Features:

• Presumptively detects cocaine in any form.
• Simple and safe testing procedure with results produced in seconds.
• Usable on any surface, sample, or suspected paraphernalia.
• Law enforcement-grade, trusted by police departments across the US.

2. Safety Information

Please read all safety instructions carefully before using the product.

• This test is for presumptive detection only and is not a harm reduction tool.
• Keep out of reach of children and pets.
• Do not ingest any part of the test kit.
• Avoid contact with eyes and skin. In case of contact, rinse thoroughly with water.
• Use in a well-ventilated area.
• Dispose of used swabs and packaging according to local regulations for chemical waste.
• Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.

3. Package Contents

Your SwabTek Cocaine Detection Swabs package should contain the following items:

• Individually sealed SwabTek Cocaine Detection Swabs (25 count)
• Instruction card with visual guide

Figure 3.1: Complete SwabTek Cocaine Detection Swabs Kit Contents.

4. Setup

No complex setup is required for the SwabTek Cocaine Detection Swabs. Ensure you have a clean, flat surface to perform the test and access to the suspected substance or surface.

1. Open the outer packaging of the SwabTek kit.
2. Carefully remove one individually sealed swab packet.
3. Ensure the instruction card is readily available for reference during the testing process.

5. Operating Instructions

Follow these steps to perform a presumptive test for cocaine using the SwabTek Cocaine Detection Swabs:

1. Prepare the Swab: Open the individually sealed swab packet by tearing along the "Open this end" line. Carefully remove the swab.
2. Collect Sample (Surface): Gently rub the tip of the swab over the suspected surface for approximately 10 seconds. Ensure good contact to collect any residue.
3. Collect Sample (Liquid/Solid): For liquid samples, dip the swab tip into the liquid. For solid samples, rub the swab tip against the solid material.
4. Activate the Test: Insert the swab tip into the designated opening on the test strip, as indicated on the instruction card. Push the swab firmly until it clicks into place.
5. Wait for Reaction: Hold the test strip upright and observe the reaction. A color change will typically occur within 30 seconds.
6. Interpret Results:
   • Positive Result (+): The appearance of a distinct blue color on the test strip indicates the presumptive presence of cocaine.
   • Negative Result (-): No color change or a color other than blue indicates the presumptive absence of cocaine.

Figure 5.1: Inserting the swab into the test strip for analysis.

Refer to the instruction card included in your kit for detailed visual guidance on interpreting results.

6. Maintenance

The SwabTek Cocaine Detection Swabs are single-use and require no maintenance. Store unused swabs in their original sealed packaging in a cool, dry place away from direct sunlight.

• Do not reuse swabs or test strips.
• Keep the product sealed until ready for use to maintain efficacy.

7. Troubleshooting

If you encounter issues while using the SwabTek Cocaine Detection Swabs, refer to the following common problems and solutions:

8. Specifications

9. Warranty & Support

Warranty Information:

SwabTek products are manufactured to high-quality standards. For specific warranty details, please refer to the information provided with your purchase or visit the official SwabTek website. Generally, products are covered against manufacturing defects.

Customer Support:

If you have any questions, require assistance, or experience issues with your SwabTek Cocaine Detection Swabs, please contact SwabTek customer support:

• Website: www.swabtek.com (Check for a dedicated support section or contact page)
• Email: Refer to the product packaging or website for the most current support email address.
• Phone: Refer to the product packaging or website for the most current support phone number.

When contacting support, please have your product model and purchase information ready.