Jerqry Car Stereo Radio User Manual

1. Overview

This manual provides detailed instructions for the installation, operation, and maintenance of your Jerqry Car Stereo Radio. This unit features a 10.4-inch IPS touchscreen, Android 13 operating system, 2GB RAM, and 32GB ROM, offering advanced connectivity and entertainment options for your Chevrolet Cruze (2009-2015).

Image 1.1: The Jerqry Car Stereo Radio main unit with its 10.4-inch display.

2. What's in the Box

Verify that all components are present before beginning installation.

• Car Radio Unit (1)
• Power Cable (1)
• Canbus Decoder (1)
• GPS Module (1)
• RCA Cable (1)
• USB Cables (2)
• Crowbar Tool (1)
• Reversing Control Cable (1)
• Backup Camera (1)
• Microphone (1)

Image 2.1: All included accessories and cables for the car stereo installation.

3. Setup and Installation

Professional installation is recommended. Ensure the vehicle's battery is disconnected before starting the installation process.

3.1 Pre-Installation Check

• Confirm vehicle compatibility (Chevy Cruze 2009-2015).
• Verify all components listed in Section 2 are present.

3.2 Removing the Original Radio

1. Carefully use the provided crowbar tool to pry open the trim panels surrounding the original car radio.
2. Unscrew any mounting bolts or clips securing the original radio.
3. Gently pull out the old radio and disconnect all wiring harnesses.

Image 3.1: Comparison of the dashboard before and after installing the new car stereo.

3.3 Wiring Connections

1. Connect the main power cable harness from the new unit to the vehicle's wiring.
2. Connect the Canbus decoder to ensure proper communication with the vehicle's systems (e.g., steering wheel controls).
3. Attach the GPS module for navigation functionality. Position the GPS antenna in a location with a clear view of the sky.
4. Connect the RCA cables for audio output to external amplifiers or subwoofers, if applicable.
5. Connect the USB cables for external device connectivity.
6. Connect the reversing control cable and the backup camera. Ensure the camera is mounted securely at the rear of the vehicle and wired correctly to trigger when reverse gear is engaged.
7. Connect the external microphone for improved call quality.

3.4 Installing the New Unit

1. Carefully slide the new car stereo into the dashboard opening, ensuring all wires are tucked away and not pinched.
2. Secure the unit with the appropriate screws or clips.
3. Reattach the trim panels.

3.5 Initial Power-Up

• Reconnect the vehicle's battery.
• Turn on the vehicle's ignition and power on the car stereo.
• Follow any on-screen prompts for initial setup.

4. Operating Instructions

This section details the primary functions and features of your car stereo.

4.1 Touchscreen Interface

The 10.4-inch IPS capacitive touchscreen provides a responsive and clear visual experience with a 1024*768 resolution. Navigate through menus and applications by tapping, swiping, and pinching.

Image 4.1: The 10.4-inch IPS touchscreen offers a clear and responsive display.

4.2 Wireless CarPlay and Android Auto

Connect your smartphone wirelessly for seamless integration of navigation, music, calls, and messages. This feature supports both Apple CarPlay and Android Auto.

• Connection: Enable Bluetooth and Wi-Fi on your smartphone. Follow the on-screen prompts on the car stereo to pair your device.
• Functionality: Access phone calls, messages, music streaming apps, and navigation directly from the car stereo display.

Image 4.2: The car stereo displaying the CarPlay and Android Auto interfaces.

4.3 Bluetooth Connectivity

The unit features Bluetooth 5.0 for hands-free calling and audio streaming.

• Pairing: Go to the Bluetooth settings on the stereo and your phone. Select the stereo's name from your phone's Bluetooth device list to pair.
• Features: Make and receive calls, access your phone's contact list, and stream music wirelessly.

Image 4.3: Bluetooth 5.0 interface for phone calls and music streaming.

4.4 GPS Navigation

Utilize the built-in GPS for accurate navigation. The system supports online maps (Google Maps, Here We Go, Waze, Navfree) when connected to Wi-Fi, and offline maps can be downloaded for use without an internet connection.

• Online Maps: Connect to a Wi-Fi hotspot to access real-time traffic and map updates.
• Offline Maps: Download map data for your region to the unit's internal storage for navigation without internet access.

Image 4.4: GPS navigation screen showing a route and map details.

4.5 5G WiFi Connectivity

The car stereo supports 5G Wi-Fi networks, providing fast and stable internet access for streaming, app downloads, and online services.

• Connection: Access Wi-Fi settings to connect to available networks or your phone's hotspot.
• Usage: Stream videos, browse the web, and download applications from the app store.

Image 4.5: Illustration of 5G WiFi capability for high-speed internet.

4.6 DSP Sound Processing

The built-in Digital Signal Processor (DSP) allows for advanced audio customization, including equalization, surround sound, bass enhancement, and sound filtering.

• Equalizer: Adjust frequency bands to tailor the audio output to your preferences.
• Sound Field: Optimize sound distribution within the vehicle for driver, co-pilot, rear passengers, or all.

Image 4.6: DSP sound settings interface for audio customization.

4.7 FM/RDS Radio

Listen to your favorite radio stations with the integrated FM tuner. RDS (Radio Data System) provides additional information like station names and song titles where available.

• Tuning: Scan for available stations or manually tune to specific frequencies.
• Presets: Save your preferred stations for quick access.

Image 4.7: FM Radio interface showing available stations and frequency.

4.8 1080P Backup Camera

The included waterproof 1080P AHD backup camera provides a 170-degree ultra-wide-angle view, automatically displaying the rear view when the vehicle is in reverse. This assists with parking and maneuvering.

• Automatic Display: The screen automatically switches to the camera view when reverse gear is engaged.
• Parking Lines: Dynamic parking lines assist in judging distance and trajectory.

Image 4.8: Rear view camera display with parking guidelines.

4.9 Steering Wheel Control (SWC)

The unit supports the vehicle's original steering wheel controls, allowing you to manage audio volume, track selection, and answer calls without taking your hands off the wheel.

• Configuration: Access the SWC settings in the stereo's menu to map vehicle buttons to specific functions.
• Convenience: Safely control essential stereo functions while driving.

Image 4.9: Steering wheel controls for managing stereo functions.

4.10 Split Screen Function

The split-screen feature allows you to run two applications simultaneously on the display, such as navigation and music playback.

• Activation: Long-press the home button or use the split-screen icon in the recent apps menu.
• Multitasking: View navigation while controlling music or browsing.

Image 4.10: The split-screen feature displaying navigation and another application.

4.11 Mirror Link

Mirror Link allows you to display your smartphone's screen directly onto the car stereo. This can be done via USB connection.

• Connection: Connect your smartphone to the stereo using a USB cable.
• Display: Your phone's screen content will be mirrored on the car stereo display.

Image 4.11: Mirror Link functionality, showing a phone screen mirrored on the stereo.

4.12 UI Replacement

The system offers various user interface (UI) themes that can be changed to personalize the look and feel of your car stereo.

• Access: Navigate to the 'General' or 'Display' settings to find UI replacement options.
• Selection: Choose from available UI themes to customize your experience.

5. Maintenance

Regular maintenance ensures optimal performance and longevity of your car stereo.

• Screen Cleaning: Use a soft, lint-free cloth to clean the touchscreen. Avoid abrasive cleaners or harsh chemicals.
• Software Updates: Periodically check for and install software updates to ensure the system has the latest features and security patches. Connect to Wi-Fi to download updates.
• Cable Inspection: Occasionally inspect all visible cables for any signs of wear or damage.
• System Reset: If the system becomes unresponsive, a soft reset can often resolve the issue. Refer to the device settings for the reset option.

6. Troubleshooting

This section addresses common issues you might encounter with your car stereo.

7. Specifications

Detailed technical specifications for the Jerqry Car Stereo Radio.

• Brand: Jerqry
• Model: 4Core 2GB RAM+32GB ROM 10.4 Inches
• Operating System: Android 13
• Screen Size: 10.4 Inches
• Display Type: IPS Capacitive Touchscreen
• Resolution: 1024*768 HD
• Processor: 4-Core
• RAM: 2GB
• Internal Storage: 32GB
• Connectivity: Bluetooth 5.0, 5G Wi-Fi
• Navigation: Built-in GPS (supports online/offline maps for North, Central, South America)
• Special Features: Wireless CarPlay, Android Auto, Mirror Link, DSP Sound, FM/RDS Radio, Steering Wheel Control, 1080P Backup Camera support, Split Screen Function, Voice Control
• Audio Output Mode: Stereo
• Mounting Type: Dashboard Mount
• Item Weight: 1.61 Kilograms
• UPC: 717352568774

Image 7.1: Illustration of the 4-Core processor, 2GB RAM, and 32GB ROM specifications.

8. Product Video Overview

Watch this video for a visual overview of the Jerqry Car Stereo Radio's features and functionalities.

9. Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or contact Jerqry customer service directly. Specific warranty terms and support channels may vary.