Yescom 60XMA036-360-RGBY
Yescom Vast-Starry 12ft Solar LED Cone Tree Light Instruction Manual
Model: 60XMA036-360-RGBY
1. Introduction
Thank you for choosing the Yescom Vast-Starry 12ft Solar LED Cone Tree Light. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your new LED cone tree light. Please read all instructions carefully before assembly and use.
Important Safety Information:
- For outdoor use only.
- Keep away from flammable materials.
- Do not allow children to play on or near the display.
- Exercise caution when handling the wrench and ground stakes.
Image: The 12ft LED cone tree light with a star topper, glowing brightly on an outdoor patio at sunset.
2. Package Contents
Ensure all components are present before beginning assembly:
- LED Light Strings with Star Topper
- Center Pole Sections (Upper Pole, Base Pole)
- Cross-shaped Metal Base
- Solar Panel with 4000mAh Battery
- Ground Stakes
- Wrench for Assembly
- Light Clips
3. Setup Instructions
Follow these steps for proper assembly and installation:
- Assemble the Base: Connect the cross-shaped metal base components. Ensure all screws are tightened securely using the provided wrench.
- Connect the Pole: Insert the base pole into the center of the assembled cross base. Secure it with the designated screw. Then, connect the upper pole sections to form the full height of the center pole.
- Install the Tree Light: Carefully drape the LED light strings from the top of the pole, allowing them to spread outwards to form the cone shape.
- Secure the Lights with Clips: Use the provided clips to attach the bottom of the light strings to the circular ring of the base. This helps maintain the cone shape and stability.
- Connect Solar Panel and Light: Connect the solar panel cable to the main light string connector.
- Assemble Solar Panel: Position the solar panel in an area that receives direct sunlight for optimal charging. Use the ground stake to secure it.
- Ground Stakes for Stability: For added stability, especially on lawns or soft ground, insert the provided ground stakes through the designated holes in the cross base.
Image: Step-by-step assembly guide for the LED cone tree light.
Image: Detailed view of the stable cross base with ground stake options.
Video: Assembly Overview
Video: This video demonstrates the assembly process of the LED cone tree light, from setting up the base to connecting the solar panel.
4. Operating Instructions
The Yescom Vast-Starry LED Cone Tree Light is solar-powered and features multiple lighting modes.
- Solar Charging: The integrated 4000mAh solar panel charges during the day. Ensure the solar panel is positioned to receive maximum direct sunlight. The lights will automatically turn on at dusk and off at dawn, providing up to 13 hours of illumination on a full charge.
- Changing Lighting Modes: The solar panel unit includes a button to cycle through 8 different lighting modes. Press the button to select your desired mode.
Available Lighting Modes:
- Combination
- In Wave
- Sequential
- Slo-Glo
- Chasing/Flash
- Slow Fade
- Twinkle/Flash
- Steady On
Image: Illustration of the 8 distinct lighting modes controlled by a single button on the solar panel.
Image: Visual representation of the solar panel charging during the day and powering the lights at night.
5. Maintenance
Proper maintenance ensures the longevity and optimal performance of your LED cone tree light.
- Cleaning: Periodically wipe the solar panel with a soft, damp cloth to remove dust and debris, ensuring efficient charging. Clean the LED lights and frame as needed.
- Storage: When not in use, especially during off-season or adverse weather conditions, disassemble the light and store it in a cool, dry place. The detachable poles allow for convenient storage.
- Battery Care: The integrated 4000mAh battery is designed for long-term use. Avoid prolonged storage in a completely discharged state.
6. Troubleshooting
If you encounter issues with your LED cone tree light, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on at night. | Insufficient solar panel charge. | Ensure the solar panel is placed in direct sunlight for at least 6-8 hours during the day. Clean any dirt or obstruction from the panel surface. Verify the solar panel is connected correctly. |
| Lights are dim or only stay on for a short period. | Partial solar panel charge or aging battery. | Relocate the solar panel to an area with more direct sunlight. If the issue persists after several days of full charge, the battery may be nearing the end of its lifespan. |
| Lights flicker or behave erratically. | Loose connection or internal wiring issue. | Check all connections between the solar panel and the light strings. Ensure no wires are pinched or damaged. |
| Difficulty assembling the base or pole. | Components not aligned correctly. | Refer to the "Setup Instructions" and the assembly diagram. Ensure all parts are oriented as shown and screws are not overtightened initially. |
7. Specifications
| Brand | Yescom |
| Model Number | 60XMA036-360-RGBY |
| Item Weight | 7 pounds (3.18 kg) |
| Product Dimensions (L x W x H) | 97 x 97 x 360 inches (246.38 x 246.38 x 914.4 cm) |
| Frame Material | Metal |
| Light Color | Multi-color |
| Voltage | 30 Volts |
| Number of LED Lights | 1120 |
| Solar Panel Battery | 4000mAh |
| Lighting Modes | 8 (Combination, In Wave, Sequential, Slo-Glo, Chasing/Flash, Slow Fade, Twinkle/Flash, Steady On) |
Image: Dimensional drawing of the 12ft LED cone tree light.
8. Warranty and Support
For warranty information, technical support, or any inquiries regarding your Yescom Vast-Starry LED Cone Tree Light, please contact Yescom customer service. Refer to the product packaging or the official Yescom website for the most current contact details and warranty terms.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.