Generic Portable to-Go Blender 2.0 (Model S-19407) Instruction Manual

1. Product Overview

The Generic Portable to-Go Blender 2.0, Model S-19407, is a compact and cordless personal blender designed for convenient blending on the go. Featuring a 70W motor and a 16 oz BPA-free Tritan blending jar, this device allows for effortless preparation of your favorite drinks anywhere. Its rechargeable battery supports up to 30 blends on a single charge, making it ideal for travel and small living spaces. The blender incorporates a simple one-touch operation and durable construction with a soft matte premium finish.

Image: Two Portable to-Go Blenders highlighting their cordless design and capacity for multiple blends per charge.

2. Important Safety Instructions

Please read all instructions carefully before using the blender and retain them for future reference. Failure to follow these instructions may result in injury or damage to the product.

• Always ensure the blender is fully assembled and the lid is securely fastened before operation.
• Do not immerse the motor base in water or any other liquid. Clean with a damp cloth only.
• Keep hands and utensils out of the blending jar while blending to prevent injury.
• Avoid contact with moving parts.
• Do not blend hot liquids, as pressure buildup can cause the lid to eject and result in burns.
• Do not overfill the blending jar beyond the maximum fill line.
• This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Keep out of reach of children.
• Only use the provided USB-C charging cable.
• Do not operate the blender if the charging port is wet.

3. Components and Assembly

The Portable to-Go Blender 2.0 comes with the following components:

• Motor Base with integrated 4000mAh rechargeable batteries (2000mAh*2)
• 16 oz BPA-free Tritan Blending Jar with measurement markings
• Lid with integrated filter/strainer
• Water-resistant USB-C charging cable

Assembly

1. Before first use, wash the blending jar and lid thoroughly with warm, soapy water. Rinse and dry completely.
2. Ensure the motor base is clean and dry.
3. Place the blending jar onto the motor base, aligning the arrows or indicators, and twist clockwise until securely locked.
4. Place the lid onto the blending jar and twist clockwise until securely sealed.

Image: Detailed diagram illustrating the various parts and features of the blender.

4. Charging the Blender

The blender is equipped with a powerful rechargeable battery. For optimal performance, fully charge the blender before its first use.

• Locate the water-resistant USB-C charging port on the motor base.
• Connect the provided USB-C cable to the blender and the other end to a compatible USB power adapter (not included) or a computer USB port.
• The indicator light will illuminate to show charging status. A full charge typically takes 3 to 5 hours.
• Once fully charged, the indicator light will change or turn off, depending on the model. Disconnect the charging cable.
• A full charge provides power for up to 30 blends, depending on ingredients and blending duration.

5. Operating Instructions

Follow these steps for safe and effective blending:

1. Prepare Ingredients: Cut fruits and vegetables into small pieces (approximately 1 inch or 2.5 cm) to ensure smooth blending. Add liquids first, then softer ingredients, and finally harder ingredients or ice. Do not exceed the 16 oz capacity.
2. Assemble Blender: Securely attach the blending jar to the motor base and twist the lid onto the jar until it forms a tight seal.
3. Start Blending: Press the power button on the motor base once for a simple one-touch operation. The 70W motor and 6-point stainless steel blades will begin blending.
4. Monitor Blending: Blend until desired consistency is achieved. For thicker mixtures, you may gently shake the blender to help ingredients circulate.
5. Stop Blending: Press the power button again to stop the blending cycle.
6. Enjoy: Carefully open the lid and pour your blended drink, or drink directly from the jar.

Image: Demonstrating the one-touch operation of the blender with ingredients inside.

Image: Illustrating the blender's powerful motor and blade system for effective blending.

6. Care and Cleaning

Proper cleaning and maintenance will extend the life of your blender.

• Blending Jar and Lid: The 16 oz BPA-free Tritan blending jar and its leak-proof lid are dishwasher safe for hassle-free cleaning. Alternatively, they can be washed by hand with warm, soapy water.
• Motor Base: Wipe the motor base with a damp cloth. Do NOT immerse the motor base in water or any other liquid. Ensure the charging port is dry before charging.
• Storage: Store the blender in a clean, dry place when not in use.

Image: A blended drink in the blender, ready for enjoyment, implying easy cleaning after use.

7. Troubleshooting

If you encounter issues with your blender, refer to the following common problems and solutions:

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact the retailer/manufacturer directly. Keep your proof of purchase for any warranty claims.

Image: The blender's compact design makes it easy to carry in a bag.