BoxWave USB-C to A PortChanger (2-Pack) Instruction Manual for Lypertek SoundFree S10

1. Introduction

The BoxWave USB-C to A PortChanger is a compact adapter designed to convert a USB Type-C port into a standard USB Type-A port. This allows for connection of various USB Type-A devices to your USB Type-C enabled device, such as the Lypertek SoundFree S10. This manual provides instructions for the proper use and maintenance of your PortChanger.

Lypertek SoundFree S10 earbuds with a BoxWave PortChanger adapter

Image 1.1: Lypertek SoundFree S10 earbuds shown alongside a BoxWave PortChanger adapter, illustrating compatibility.

2. Safety Information

Do not expose the device to extreme temperatures or moisture.
Avoid dropping or subjecting the device to strong impacts.
Keep out of reach of children.
Do not attempt to disassemble or modify the device.

3. Package Contents

Your BoxWave USB-C to A PortChanger package includes:

Two (2) BoxWave USB-C to A PortChanger adapters.
Two (2) attached straps for portability.

Two BoxWave USB-C to A PortChanger adapters with attached straps

Image 3.1: The two included BoxWave USB-C to A PortChanger adapters, each with a small strap for attachment.

4. Setup

The PortChanger is designed for simple plug-and-play functionality. No software installation is required.

Identify the USB Type-C port on your device (e.g., Lypertek SoundFree S10 charging case, smartphone, tablet, or laptop).
Insert the USB Type-C end of the PortChanger into your device's USB Type-C port. Ensure it is fully seated.
Connect your desired USB Type-A peripheral (e.g., flash drive, mouse, keyboard, USB hub) into the USB Type-A port of the PortChanger.

Close-up of two BoxWave PortChanger adapters, one black and one silver, showing the USB-C and USB-A ends

Image 4.1: A close-up view of the PortChanger, highlighting its USB-C input and USB-A output ports.

5. Operating Instructions

The PortChanger facilitates various functions depending on the connected peripheral and the capabilities of your host device.

5.1. Data Transfer

To transfer data between your device and a USB flash drive or external storage:

Connect the PortChanger to your USB Type-C device.
Insert a USB flash drive into the PortChanger's USB Type-A port.
Your device should recognize the external storage. Navigate to your device's file manager or settings to access and transfer files.

BoxWave PortChanger connected to a smartphone, with a USB flash drive inserted, showing data transfer icons

Image 5.1: A smartphone connected to a PortChanger, which in turn is connected to a USB flash drive, demonstrating data transfer capabilities.

5.2. Connecting Peripherals (Mouse, Keyboard, USB Hub)

To connect USB Type-A peripherals:

Connect the PortChanger to your USB Type-C device.
Plug your USB Type-A mouse, keyboard, or USB hub into the PortChanger's USB Type-A port.
Your device should automatically detect and allow use of the connected peripheral. For USB hubs, you can connect multiple USB Type-A devices.

BoxWave PortChanger connected to a laptop, with a USB mouse plugged into the adapter

Image 5.2: A laptop with a PortChanger connected, demonstrating the use of a USB mouse through the adapter.

BoxWave PortChanger connected to a laptop, with a USB hub plugged into the adapter

Image 5.3: A laptop connected to a PortChanger, which is then connected to a USB hub, expanding connectivity options.

6. Troubleshooting

Problem	Possible Solution
Device not recognized.	Ensure the PortChanger is fully inserted into the USB Type-C port. Ensure the peripheral is fully inserted into the PortChanger's USB Type-A port. Try connecting the peripheral directly to another device (if possible) to confirm it is functional. Restart your host device.
Slow data transfer.	Ensure both the host device and the peripheral support USB 3.0 or higher for optimal speeds. Avoid transferring very large files while other intensive tasks are running on your device.
Peripheral not functioning correctly.	Verify that your host device supports the specific peripheral (e.g., some devices may not support external displays via OTG). Check if the peripheral requires external power.

7. Specifications

Model: PortChanger
Connector 1: USB Type-C Male
Connector 2: USB Type-A Female
Protocol: USB Type-C OTG (On-The-Go)
Dimensions: Approximately 1.25 inches (length)
Weight: 0.3 ounces (per adapter)
Manufacturer: BoxWave

8. Maintenance

Clean the PortChanger with a soft, dry cloth. Do not use liquid cleaners.
Store the adapter in a cool, dry place when not in use.
Avoid bending or twisting the adapter excessively, especially at the connection points.

9. Warranty and Support

For warranty information and technical support, please refer to the BoxWave official website or contact their customer service. Limited third-party technical support for Lypertek SoundFree S10 compatibility (up to 3 inquiries via electronic messaging) is included with purchase, though BoxWave is not affiliated with or endorsed by Lypertek.