1. Introduction
Thank you for choosing the BATHKITY Electric Bidet Toilet Seat. This manual provides essential information for the safe installation, operation, and maintenance of your new bidet seat. Please read these instructions thoroughly before use and retain them for future reference.
This electric bidet toilet seat is designed to enhance personal hygiene with features such as adjustable warm water wash, warm air drying, a heated seat, and a soft-close lid. It is equipped with a self-cleaning stainless steel nozzle and offers customizable settings for a personalized experience.
Image 1.1: The BATHKITY Electric Bidet Toilet Seat.
2. Safety Information
To ensure safe operation and prevent injury or damage, please observe the following safety precautions:
- Electrical Safety: This appliance operates on AC 120V~ 60Hz. Ensure the power outlet is a Ground Fault Circuit Interrupter (GFCI) protected outlet and is located within 3.93 ft (1.2 m) of the toilet. Do not use extension cords unless absolutely necessary and ensure they are rated for bathroom use.
- Water Connection: Connect the bidet seat only to a potable water supply. Ensure all connections are secure to prevent leaks.
- Temperature Range: The working ambient temperature for this unit is 33.8 – 104 ºF (0 – 40 ºC). Do not install in locations where water may freeze.
- Power Consumption: The rated maximum power consumption is 1220W. Do not overload the electrical circuit.
- Children and Individuals with Limited Mobility: This product can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- Cleaning: Disconnect power before cleaning. Do not immerse the unit in water.
3. Product Features
The BATHKITY Electric Bidet Toilet Seat offers a range of features designed for comfort and hygiene:
- Instant Warm Water: Provides immediate warm water for washing, with adjustable temperature control.
- Heated Seat: Ergonomically designed seat with adjustable heating for comfort, particularly in colder environments.
- Warm Air Drying: Integrated air dryer to reduce the need for toilet paper.
- Multiple Wash Modes: Includes Feminine Wash, Rear Wash, Oscillating Wash, Power Wash, and Pulse Wash.
- Self-Cleaning Stainless Steel Nozzle: Ensures hygiene with minimal effort. The nozzle performs a self-cleaning cycle before and after each use.
- Customizable Settings: Personalize water temperature, pressure, and nozzle position for up to two users.
- Soft-Close Lid & Seat: The lid and seat close gently and quietly, preventing slamming.
- Smart Seat Sensor: Built-in sensor to prevent misoperation; functions activate only when the seat is occupied.
- IPX4 Waterproof: Designed to withstand water splashing.
- Dual Control Options: Operate via a wireless remote control or a side control knob.
- Visual Indicator Lights: Display water and seat temperatures for easy monitoring.
- UL Certification: Ensures quality and safety standards are met.
- Water Filtration: Includes a bidet filter to ensure clean water for cleansing.
- ECO & Silent Mode: Reduces electricity consumption when not in use.
Image 3.1: Features including instant warm water, heated seat, and warm air drying with 4 adjustable temperature levels.
Image 3.2: Illustration of various wash modes including Rear Wash, Front Wash, Oscillating Wash, Power Wash, Pulse Wash, and Nozzle Self-cleaning.
Image 3.3: Key features such as IPX4 waterproofing, smart seat sensor, and soft-close lid and seat mechanism.
4. Package Contents
Verify that all components are present in the package before beginning installation:
- Electric Bidet Seat
- T-adapter (G1/2, G3/8, G7/8(15/16) inch)
- Metal Gasket
- Expansion Bolt
- Expansion Rubber Grommet
- Expansion Nut
- Mounting Plate
- Remote Control
- Remote Control Holder
- Bidet Filter
- User Manual
- Installation Guide Cardboard
- Bidet Hose
Image 4.1: All components included in the BATHKITY Electric Bidet Seat package.
5. Installation
The BATHKITY Electric Bidet Seat is designed to fit most elongated toilets. Follow these steps for installation:
- Prepare the Toilet: Turn off the water supply to the toilet and flush to empty the tank. Remove your existing toilet seat.
- Install the Mounting Plate: Position the mounting plate over the toilet bowl holes.
- Secure the Mounting Plate: Use the provided cardboard guide to assist in aligning and securing the mounting plate with the expansion bolts, rubber grommets, and nuts.
- Install the Bidet Seat: Slide the bidet seat onto the secured mounting plate until it clicks into place.
- Connect the Water Line: Install the T-adapter to the toilet's water supply valve. Connect the bidet hose from the T-adapter to the bidet seat. Ensure connections are tight to prevent leaks.
- Connect to Power Supply: Plug the bidet seat's power cord into a GFCI-protected electrical outlet.
- Restore Water Supply: Slowly turn on the water supply to the toilet and check for any leaks.
Image 5.1: Step-by-step visual guide for installing the bidet seat, including mounting, water line connection, and power connection.
Image 5.2: Diagram showing compatibility with elongated toilets and the requirement for a nearby electrical outlet.
6. Operation
Your BATHKITY Electric Bidet Toilet Seat can be operated using the wireless remote control or the side control knob.
6.1. Wireless Remote Control
The remote control allows for comprehensive adjustment of all bidet functions. It can be held in hand or mounted on the wall for convenience. (Requires 2 AA batteries, included for immediate use).
Image 6.1: Detailed view of the wireless remote control and its various function buttons.
- Stop: Stops all current operations.
- Female/Rear: Activates Feminine or Rear wash modes.
- Power Wash/Massage: Activates a stronger wash or pulsating massage function.
- Water Temperature/Seat Temperature: Adjusts the temperature of the wash water and the heated seat.
- Water Pressure: Adjusts the intensity of the water spray.
- Nozzle Cleaning: Initiates a self-cleaning cycle for the nozzle.
- Air Drying: Activates the warm air dryer.
- Air Temp: Adjusts the temperature of the warm air dryer.
- Nozzle Position: Adjusts the forward/backward position of the nozzle.
- Night Light: Toggles the night light feature.
- ECO: Activates energy-saving mode.
- User Mode 1/User Mode 2: Saves and recalls personalized settings for two different users.
6.2. Side Control Knob
The side control knob provides quick access to essential washing and drying functions, and allows for temperature adjustments.
Image 6.2: Illustration of the side control knob and its functions.
- Front Twist: Activates Feminine Wash.
- Rear Twist: Activates Posterior Wash.
- Long Press: Activates Power Wash.
- Short Press: Activates Air Drying and Stop function.
7. Maintenance
Regular maintenance ensures optimal performance and hygiene of your bidet seat.
7.1. Nozzle Cleaning
The stainless steel nozzle performs an automatic self-cleaning function before and after each use. For additional cleaning, use the "Nozzle Cleaning" button on the remote control.
7.2. Exterior Cleaning
- Disconnect the power cord before cleaning.
- Wipe the exterior surfaces of the bidet seat with a soft, damp cloth and a mild, non-abrasive cleaner.
- Do not use harsh chemicals, abrasive pads, or solvents, as these can damage the surface.
- Ensure no water enters the electrical components.
7.3. Water Filter Replacement
The bidet seat includes a water filter. Replace the filter periodically according to usage or manufacturer recommendations to maintain water quality.
8. Troubleshooting
If you encounter issues with your bidet seat, refer to the following common troubleshooting tips:
- No Power: Check if the power cord is securely plugged into a GFCI outlet. Verify the outlet is functioning by plugging in another appliance. Reset the GFCI if tripped.
- No Water Spray: Ensure the toilet's water supply valve is fully open. Check if the bidet hose is properly connected and not kinked. Verify the water filter is not clogged.
- Weak Water Spray: Adjust the water pressure setting using the remote control. Check for any obstructions in the nozzle.
- No Heated Water/Seat: Ensure the bidet seat is powered on and the water/seat temperature settings are adjusted correctly. Allow a few moments for heating elements to warm up.
- Remote Control Not Responding: Check the batteries in the remote control and replace if necessary. Ensure there are no obstructions between the remote and the bidet seat.
- Leaks: Turn off the water supply immediately. Check all water connections (T-adapter, bidet hose) for tightness. Ensure gaskets are properly seated.
If the problem persists after attempting these steps, please contact customer support.
9. Specifications
| Attribute | Detail |
|---|---|
| Brand | BATHKITY |
| Model Number | WLJG4-505V-US |
| Color | White |
| Material | Polypropylene (PP) |
| Style | Modern |
| Shape | Oval (Elongated) |
| Product Dimensions | 17"L x 7"W |
| Item Weight | 12.12 pounds |
| Power Rating | AC 120V~ 60Hz |
| Power Cord Length | 3.93 ft (1.2 m) |
| Working Ambient Temp. | 33.8 – 104 ºF (0 – 40 ºC) |
| Rated Max Power Consumption | 1220W |
| UPC | 768795741132 |
10. Warranty and Support
The BATHKITY Electric Bidet Toilet Seat comes with a 3-year warranty. This warranty covers defects in materials and workmanship under normal use and maintenance.
For warranty claims, technical support, or any questions not addressed in this manual, please contact BATHKITY customer service. Keep your purchase receipt as proof of purchase for warranty validation.
