Interio by Godrej Vurv Chair Instruction Manual

1. Introduction

This manual provides essential information for the assembly, operation, and maintenance of your Interio by Godrej Vurv Chair. Please read these instructions carefully before use to ensure proper function and longevity of your product.

The Interio by Godrej Vurv Chair is designed for ergonomic support and comfort, featuring a mesh back, height adjustment, and a center tilt mechanism. This model is supplied as a DIY (Do It Yourself) assembly product.

2. Product Features

• Mesh Back: Broad mesh back provides excellent airflow and lumbar support for extended sitting.
• Adjustable Lumbar Support: Supports your back when you sit, work, or relax.
• Center Tilt Mechanism: Allows personalized reclining and adjustment of posture. Includes an upright position locking feature.
• Height Adjustable: Accommodates various body types and desk heights.
• Cushioned Seat: Contoured foam seat provides soft, supportive comfort and relieves pressure.
• Wide Armrests: Fixed armrests offer optimal support for elbows and forearms.
• Heavy Duty Polypropylene Base: Glass Reinforced Polypropylene Base with durable castors ensures long-lasting usage and easy maintenance.
• 360° Swivel: For flexible body movements.

3. Assembly Instructions

The Interio by Godrej Vurv Chair requires DIY assembly. An Allen key is included for convenience. Please follow the steps below carefully. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.

3.1 Unpacking

Carefully remove all components from the packaging. Verify that all parts listed in the included components section are present. If any parts are missing or damaged, contact customer support.

3.2 Component Identification

Refer to the diagram below for identification of chair components.

Image: Diagram showing various components of the Vurv Mid Back Chair.

3.3 Step-by-Step Assembly

1. Attach Casters to Base: Insert the five casters into the holes at the end of each leg of the chair base. Push firmly until they click into place.
2. Insert Gas Lift: Place the gas lift cylinder into the center hole of the assembled base. Do not remove the red cap from the gas lift until instructed.
3. Attach Mechanism to Seat: Secure the chair mechanism to the underside of the seat using the provided screws. Ensure the front of the mechanism aligns with the front of the seat.
4. Attach Backrest to Seat: Connect the backrest to the seat assembly. Use the provided screws and Allen key to tighten securely.
5. Attach Armrests: Secure the armrests to both the seat and backrest using the designated screws.
6. Connect Seat Assembly to Gas Lift: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring it is centered. Apply gentle downward pressure to secure.

Assembly typically takes approximately 30 minutes.

Image: An assembled Interio by Godrej Vurv Mid Back Chair in a home office setting.

4. Operating Instructions

Your Vurv Chair offers several adjustments to customize your seating experience.

4.1 Seat Height Adjustment

To adjust the seat height:

1. To raise the seat, lift the lever located under the right side of the seat while taking your weight off the chair. Release the lever at the desired height.
2. To lower the seat, lift the lever while seated. Release the lever at the desired height.

Image: Close-up showing adjustable lumbar support and wide armrests on the Vurv Chair.

4.2 Lumbar Support Adjustment

The lumbar support can be adjusted vertically to fit the curve of your lower back. Gently push or pull the lumbar support mechanism on the backrest to move it up or down to your preferred position.

4.3 Tilt Mechanism and Lock

The chair features a center tilt mechanism allowing the backrest and seat to recline together. To operate:

1. To recline, pull the lever (same as height adjustment lever) outwards. Lean back to the desired angle.
2. To lock the chair in an upright position, push the lever inwards while the chair is in the upright position.

Image: Visual representation of the chair's 360-degree swivel, cushioned seating, and center tilt mechanism.

4.4 Swivel Function

The chair is designed with a 360-degree swivel function, allowing for easy rotation without moving the base.

5. Maintenance and Care

Proper care will extend the life and appearance of your Vurv Chair.

• Cleaning: Wipe surfaces with a soft, thick cloth. Avoid using bleach or harsh chemicals when cleaning upholstery.
• Heat Protection: Do not place hot items directly on the chair surface. Use hot pads or coasters if necessary.
• Sunlight Exposure: To prevent fading, avoid prolonged exposure to direct sunlight. Position the chair away from windows or use blinds/curtains.
• Regular Cleaning: Clean your chair regularly to maintain its appearance and hygiene.
• Caster Maintenance: Periodically check casters for debris (hair, dust) and clean as needed to ensure smooth movement.

6. Specifications

Image: Detailed dimensions of the Vurv Chair, including chair width, wheelbase diameter, and height range.

7. Troubleshooting

This section addresses common issues you might encounter with your Vurv Chair.

• Chair not adjusting height: Ensure the gas lift lever is fully engaged. If the issue persists, check if the gas lift cylinder is properly seated in the base and mechanism.
• Chair wobbles: Verify that all screws and connections are securely tightened. Ensure the casters are fully inserted into the base.
• Casters not rolling smoothly: Check casters for accumulated debris (hair, lint) and clean them. Ensure they are properly installed.
• Backrest not tilting: Ensure the tilt lock lever is disengaged (pulled outwards).

For further assistance, please contact customer support.

8. Warranty and Support

Your Interio by Godrej Vurv Chair comes with a 1-year warranty. For any warranty claims or support, please contact:

• Manufacturer: Godrej & Boyce Manufacturing Co. Ltd.
• Email: interiocare@godrej.com
• Phone: 080-67436743

Please have your model number (VURVBLU03) and purchase details ready when contacting support.

9. Product Video

Watch the official product video for a visual guide on the features and adjustments of the Interio by Godrej Vurv Chair.