Bear 0.6L+2L Electric Food Chopper Instruction Manual

1. Introduction

Thank you for purchasing the Bear 0.6L+2L Electric Food Chopper. This manual provides essential information for the safe and efficient operation, maintenance, and care of your new appliance. Please read these instructions thoroughly before first use and retain them for future reference.

2. Important Safety Instructions

• Always unplug the appliance from the power outlet before assembly, disassembly, or cleaning.
• Do not immerse the motor unit in water or any other liquid. Wipe clean only.
• Keep hands and utensils away from the moving blades during operation to prevent injury.
• Ensure the lid is securely locked in place before operating the chopper.
• This appliance is not intended for use by children. Keep out of reach of children.
• Do not operate the appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
• Use only original Bear accessories and parts.
• Avoid processing extremely hard foods that may damage the blades or motor.
• Do not overload the chopper. Refer to the capacity guidelines for each bowl.

3. Product Components

Your Bear Electric Food Chopper includes the following components:

• Motor Unit (with power cord)
• 2.0 Liter Glass Bowl
• 0.6 Liter Glass Bowl
• Blade Assembly (4-blade stainless steel, 2 sets)
• Lids for each bowl
• Anti-slip Mat

Image 3.1: Overview of the Bear Electric Food Chopper components, including the main motor unit, the large 2-liter glass bowl filled with meat, the smaller 0.6-liter glass bowl with chopped carrots, and the detachable stainless steel blade assembly.

Image 3.2: The food chopper demonstrating its dual capacity with a 2-liter bowl and a 0.6-liter bowl, alongside examples of finely chopped meat, chili, garlic, and onion, highlighting its versatility for different ingredient types.

4. Setup Instructions

Follow these steps to assemble your food chopper before use:

1. Place the Anti-slip Mat: Position the anti-slip mat on a clean, dry, and stable surface.
2. Select and Place the Bowl: Choose either the 2.0L or 0.6L glass bowl depending on your needs and place it onto the anti-slip mat.
3. Install the Blade Assembly: Carefully place the blade assembly onto the central shaft inside the glass bowl. Ensure it sits securely. The blades are sharp; handle with care.
4. Add Ingredients: Place your desired ingredients into the bowl. Do not exceed the maximum fill line.
5. Secure the Lid: Place the appropriate lid onto the glass bowl, ensuring it is properly aligned and seated.
6. Attach the Motor Unit: Position the motor unit onto the lid, aligning the drive shaft with the blade assembly. Gently twist or press down until it locks into place.
7. Connect to Power: Plug the power cord into a suitable electrical outlet.

Image 4.1: Visual guide illustrating the secure installation of the food-grade 304 stainless steel blade assembly into the chopper bowl, showing the motor unit being detached and reattached, and the two-step process for handling the blades.

5. Operating Instructions

The Bear Electric Food Chopper features two speed settings for versatile food preparation:

• Speed I (Low Speed): Ideal for processing softer ingredients such as fruits, garlic, onions, and herbs. Press the 'I' button for continuous low-speed operation.
• Speed II (High Speed): Suitable for harder ingredients like carrots, nuts, and meat. Press the 'II' button for continuous high-speed operation.

General Operation:

1. Ensure the chopper is correctly assembled and plugged in.
2. Press and hold the desired speed button (I or II) on the motor unit to start chopping.
3. Release the button to stop operation. For best results, use short pulses for coarse chopping or hold for longer periods for finer results.
4. After processing, unplug the appliance, carefully remove the motor unit, then the lid, and finally the blade assembly before removing the chopped ingredients.

Image 5.1: The food chopper displaying its two-speed functionality, with 'I' indicating low speed for soft ingredients like chopped chili and celery, and 'II' indicating high speed for harder items such as peanuts, carrots, and minced meat.

6. Cleaning and Maintenance

Proper cleaning and maintenance will extend the life of your food chopper:

1. Unplug: Always unplug the appliance from the power outlet before cleaning.
2. Disassemble: Carefully remove the motor unit, lid, and blade assembly from the glass bowl.
3. Clean Blades, Bowls, and Lids: The glass bowls, blade assemblies, and lids are dishwasher safe or can be washed by hand with warm, soapy water. Rinse thoroughly and dry immediately. Handle blades with extreme caution due to their sharpness.
4. Clean Motor Unit: Wipe the motor unit with a damp cloth. Do not immerse the motor unit in water or any other liquid.
5. Storage: Ensure all parts are completely dry before reassembling or storing the appliance. Store in a cool, dry place.

Image 6.1: A visual representation of the easy cleaning process for the food chopper's detachable parts, including the glass bowls, lids, and blade assemblies, being rinsed under water. A clear warning indicates that the main motor unit cannot be cleaned with water.

7. Troubleshooting

If you encounter issues with your Bear Electric Food Chopper, refer to the following common problems and solutions:

• Appliance does not turn on:
  • Ensure the power cord is securely plugged into a working outlet.
  • Check that the motor unit is correctly assembled and locked onto the lid and bowl.
• Ingredients are not chopping evenly:
  • Ensure ingredients are cut into small, uniform pieces before placing them in the bowl.
  • Do not overload the bowl. Process in smaller batches if necessary.
  • Use the pulsing technique (short presses of the button) for better control over consistency.
• Motor sounds strained or stops:
  • The bowl may be overloaded. Reduce the amount of ingredients.
  • Ingredients may be too hard. Ensure ingredients are suitable for chopping.
  • Unplug the unit and allow the motor to cool down if it has been running continuously for an extended period.

If the problem persists after trying these solutions, please contact customer support.

8. Specifications

Image 8.1: A comparative diagram showcasing the advantages of the Bear Electric Food Chopper, including two bowls for different needs, two-speed control, two sets of improved blades for easy cleaning, and a powerful 300W motor, contrasted with less optimal designs.

9. Warranty and Support

The Bear Electric Food Chopper comes with a 1-year warranty from the date of purchase. Bear also offers 24-hour customer service to assist with any inquiries or issues you may have.

For warranty claims, technical support, or general questions, please refer to the contact information provided with your purchase documentation or visit the official Bear website.