TUTOTAK LED Nightstand Set of 2 Instruction Manual

1. Introduction

Thank you for choosing the TUTOTAK LED Nightstand Set of 2. This manual provides essential information for the safe assembly, operation, and maintenance of your new nightstands. Please read these instructions thoroughly before beginning assembly and retain them for future reference.

Image 1.1: Assembled TUTOTAK LED Nightstands

2. Safety Information

Please observe the following safety warnings to prevent injury or damage to the product:

• Always assemble the product on a soft, clean surface to prevent scratches.
• Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
• Keep small parts away from children during assembly to avoid choking hazards.
• Exercise caution when handling components with sharp edges.
• Do not overload the shelves or the top surface. Refer to the specifications for weight limits.
• Ensure the power cord is not pinched or damaged during assembly or placement.
• Do not expose the electrical components (charging station, LED lights) to water or excessive moisture.
• If any electrical component malfunctions, discontinue use immediately and contact customer support.

3. Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

Image 3.1: Exploded View and Parts Diagram

Included Components:

• Top Board (x2)
• Middle Board (x2)
• Bottom Board (x2)
• Metal Frame Legs (various sizes, x8 total)
• Fabric Drawer (x2)
• Power Strip with AC Outlets, USB, and Type-C Ports (x2)
• LED Light Strip (x2)
• Adjustable Foot Pads (x8)
• Assembly Hardware (screws, Allen wrench, etc.)
• Instruction Manual (this document)

4. Assembly Instructions

Assembly is recommended for one person. A Phillips head screwdriver may be helpful in addition to the included tools.

Step-by-Step Assembly:

1. Prepare Components: Unpack all parts and lay them out on a soft, clean surface to prevent scratches. Refer to Image 3.1 to identify each component.
2. Attach Metal Frames to Bottom Board: Secure the four metal frame legs to the bottom board using the provided screws and Allen wrench. Ensure the legs are oriented correctly.
3. Install Middle Board: Attach the middle board to the metal frame legs. Make sure the pre-drilled holes align for proper fitment.
4. Attach Top Board and Power Strip: Secure the top board to the upper section of the metal frame. Carefully insert the power strip into the designated cutout on the top board and secure it if necessary.
5. Insert Fabric Drawer: Fold and assemble the fabric drawer according to its individual instructions (if provided). Slide the assembled fabric drawer into the designated slot between the middle and top boards.
6. Install LED Light Strip: Adhere the LED light strip to the underside of the top board or along the inner edges of the frame as indicated in the LED light instructions. Connect it to the power strip.
7. Attach Adjustable Foot Pads: Screw the adjustable foot pads into the bottom of the metal frame legs. Adjust them as needed to ensure stability on uneven surfaces.
8. Repeat for Second Nightstand: Follow these steps to assemble the second nightstand.

Image 4.1: Adjustable Foot Pad Installation

5. Operating Instructions

5.1. Charging Station

Each nightstand is equipped with a built-in charging station for convenient power access.

Image 5.1: Integrated Charging Station

• AC Outlets: Plug in standard electrical devices (e.g., lamps, laptops) into the 120V/12A AC outlets.
• USB Ports: Use the 5V/2A USB-A and USB-C ports to charge compatible electronic devices such as smartphones, tablets, and smartwatches.
• Power Connection: Ensure the 4.9-foot power cord is securely plugged into a wall outlet.

5.2. LED Light Strips

The integrated LED light strips offer customizable ambiance.

Image 5.2: LED Light Features

• Control: Use the 3-button control switch (or remote if included) to operate the LED lights.
• Color Options: Select from 7 vibrant color options.
• Dynamic Modes: Choose from 6 dynamic flashing modes.
• Brightness Adjustment: Adjust the brightness through 5 levels to suit your preference.
• Power On/Off: Use the dedicated button to turn the LED lights on or off.

6. Maintenance

Proper care will extend the life of your nightstands.

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Dusting: Regularly dust the nightstands to prevent buildup.
• Drawer Care: The fabric drawers can be spot cleaned with a mild detergent and water. Allow to air dry completely.
• Electrical Components: Keep the charging station and LED lights free from dust and debris. Do not attempt to disassemble or repair electrical components yourself.

7. Troubleshooting

If you encounter issues, refer to the following common solutions:

If these solutions do not resolve the issue, please contact TUTOTAK customer support.

8. Specifications

Detailed product specifications for the TUTOTAK LED Nightstand (Model TB01BB0692L).

Image 8.1: Product Dimensions and Weight Capacity

• Brand: TUTOTAK
• Model Number: TB01BB0692L
• Product Dimensions: 11"D x 15"W x 23.7"H
• Color: Brown
• Material: Engineered Wood (Top), Metal (Frame), Fabric (Drawer)
• Number of Drawers: 1 (Fabric)
• Number of Shelves: 3 (including top surface)
• Power Outlets: 1 AC Outlet (120V/12A), 1 USB-A Port (5V/2A), 1 USB-C Port (5V/2A)
• Power Cord Length: 4.9 feet
• LED Features: 7 Color Options, 6 Dynamic Modes, 5 Brightness Levels
• Assembly Required: Yes (Tools included)
• Indoor/Outdoor Usage: Indoor

9. Warranty and Support

TUTOTAK products are designed for quality and durability. For specific warranty information, please refer to the documentation included with your purchase or visit the official TUTOTAK website.

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact TUTOTAK customer support through the retailer where the product was purchased or via the contact information provided on the TUTOTAK brand website.