ZIXCARE Automatic Digital Blood Pressure Monitor User Manual

Introduction

Welcome to your ZIXCARE Automatic Digital Blood Pressure Monitor. This device is designed for convenient and accurate blood pressure measurement at home. Please read this manual thoroughly before use to ensure proper operation and maintenance.

ZIXCARE Automatic Digital Blood Pressure Monitor with cuff.

Contents of the ZIXCARE Blood Pressure Monitor package, including the main unit, cuff, batteries, USB cable, and storage pouch.

Product Components and Display Overview

Familiarize yourself with the main unit and its display indicators.

This diagram illustrates the various parts of the blood pressure monitor and their corresponding functions: User Icon, Detection for Cuff Wrapping (OK), Heartbeat indicator, mmHg Unit of Pressure, SYS (Systolic Blood Pressure), DIA (Diastolic Blood Pressure), PUL (Pulse Blood Pressure), User 1 & User 2 indicators, Power switch, Memory Number, Low Battery indicator, and Blood Pressure Classification bar.

Key Components:

• Main Unit: The digital display and control panel.
• Arm Cuff: Designed for upper arm measurements, suitable for arm circumferences of 22-42cm (8.7-16.5 inches).
• USB Charging Cable: For power supply.
• AAA Batteries: (4 included) for portable power.
• Storage Pouch: For convenient storage and transport.

Setup

Battery Installation

Locate the battery compartment on the underside of the main unit. Insert 4 AAA batteries, ensuring correct polarity (+/-). Close the battery cover securely.

The underside of the blood pressure monitor unit, illustrating the battery compartment where four AAA batteries are to be inserted. The device can also be powered via a DC charging cable.

Cuff Connection

Insert the air tube connector from the arm cuff firmly into the air jack on the side of the main unit.

Applying the Cuff

• Ensure your arm is bare or has thin clothing.
• Place the cuff on your left upper arm, approximately 0.8-1.2 inches (2-3 cm) above the elbow joint.
• The air tube should run down the inside of your arm, aligned with your middle finger.
• Wrap the cuff snugly around your arm, ensuring it is not too tight or too loose. The "OK" symbol on the display may indicate proper cuff wrapping.

A visual guide showing the proper application of the large size arm cuff, indicating it should be placed 0.8-1.2 inches above the elbow. The cuff is suitable for arm sizes between 22-42cm (8.7-16.5 inches).

Operation

Before Measurement

• Rest for at least 5 minutes before taking a measurement.
• Avoid eating, drinking alcohol, smoking, or exercising for 30 minutes prior.
• Sit upright with your back supported and feet flat on the floor. Do not cross your legs.
• Place your arm on a table so the cuff is at heart level.

Taking a Measurement

• Press the "Power" button (usually the large central button) to turn on the device.
• Select your user profile (User 1 or User 2) if applicable, by pressing the user icon button.
• The cuff will automatically inflate. Remain still and silent during the measurement.
• Once the measurement is complete, the systolic (SYS), diastolic (DIA), and pulse (PUL) readings will be displayed.
• The device will automatically store the reading in the selected user's memory.

This image highlights the large, high-definition backlit LED screen, which ensures clear visibility of readings even in low light conditions. It shows typical SYS, DIA, and PUL readings along with the blood pressure classification bar.

User Selection and Memory Function

The monitor supports two users with 120 memories each (total 240 memories).

• To switch between User 1 and User 2, press the user selection button (often depicted with two person icons).
• To review past measurements, press the "Memory" button (often labeled "Mem" or with a list icon). Repeatedly pressing this button will cycle through stored readings.

This image illustrates the dual-user capability of the monitor, allowing two individuals to track their readings independently with 120 memory slots each. It also highlights features like automatic memory storage and options for before/after medicine and morning/evening readings.

Understanding Your Readings

The monitor provides a color-coded classification bar on the side of the display to help interpret your blood pressure readings according to standard guidelines.

This chart provides a quick reference for blood pressure classification based on SYS (Systolic) and DIA (Diastolic) values. Categories include: Best (≤119 SYS, ≤79 DIA), Normal (120-129 SYS, 80-89 DIA), High-Normal (130-139 SYS, 85-89 DIA), Mild (140-159 SYS, 90-99 DIA), Moderate (160-170 SYS, 100-109 DIA), and Serious (≥180 SYS, ≥110 DIA).

Blood Pressure Categories (Example Guidelines):

Consult your healthcare professional for accurate interpretation of your readings and personalized advice.

Maintenance and Care

Cleaning

• Wipe the main unit and cuff with a soft, dry cloth.
• If necessary, use a slightly damp cloth with mild soap, then wipe dry.
• Do not use abrasive cleaners, alcohol, or solvents.
• Do not immerse the unit or cuff in water.

Storage

• Store the device in its storage pouch in a cool, dry place.
• Avoid extreme temperatures, direct sunlight, and high humidity.
• If not using for an extended period, remove the batteries to prevent leakage.

Battery Replacement

When the low battery indicator appears on the display, replace all four AAA batteries with new ones.

Troubleshooting

If problems persist, contact customer support.

Specifications

• Product Name: Automatic Digital Blood Pressure Monitor
• Model: ZIXCARE BP-M100
• Measurement Method: Oscillometric
• Measurement Range: Pressure: 0-299 mmHg; Pulse: 40-199 beats/minute
• Accuracy: Pressure: ±3 mmHg; Pulse: ±5% of reading
• Cuff Size: Large Cuff (22-42 cm / 8.7-16.5 inches)
• Memory: 2 users x 120 sets of readings
• Power Source: 4 x AAA batteries or DC 5V USB
• Operating Conditions: 5°C to 40°C (41°F to 104°F), 15% to 85% RH
• Storage Conditions: -20°C to 55°C (-4°F to 131°F), 10% to 93% RH
• Dimensions: (Approximate) Main unit: 120mm x 90mm x 40mm
• Weight: (Approximate) 250g (excluding batteries)
• Manufacturer: Shenzhen Finicare Co., Ltd.
• UPC: 717331755379

Warranty and Support

ZIXCARE provides a 1-year limited warranty from the date of purchase against defects in materials and workmanship. This warranty does not cover damage caused by misuse, accident, or unauthorized modification.

For technical support, warranty claims, or service inquiries, please contact ZIXCARE customer service via their official website or the contact information provided with your product packaging.

Website: www.zixcare.com

Email: support@zixcare.com