Introduction
The PANACARE Blood Pressure Monitor is an advanced, fully automatic device designed for accurate and convenient blood pressure measurement at home. Featuring updated algorithms and a built-in smart chip, it provides clinically accurate readings. Its large, 3-color backlit display ensures easy readability and immediate interpretation of results based on WHO guidelines.
This monitor supports two users with storage for up to 99 records each, including date and time stamps, making it ideal for tracking health trends over time. The comfortable, wide-range cuff (22-40cm) accommodates various arm sizes. The device operates quietly without voice prompts for a more comfortable user experience.
Image: The PANACARE Blood Pressure Monitor displaying a normal blood pressure reading in green, along with the cuff and USB cables.
Package Contents
Upon unboxing, please verify that all components are present:
- 1 x PANACARE Blood Pressure Monitor
- 1 x Upper Arm Cuff (22-40cm)
- 1 x USB Charging Cable
- 1 x User Manual (this document)
- 1 x Carrying Case
Image: All items included in the PANACARE Blood Pressure Monitor package: the monitor, cuff, USB cable, user manual, and carrying case.
Setup
Powering the Device
The PANACARE Blood Pressure Monitor can be powered by two methods:
- 4 x AA Batteries (NOT Included): Open the battery compartment on the back of the device and insert four AA batteries, ensuring correct polarity.
- USB Cable: Connect the provided USB cable to the monitor and plug the other end into a USB power adapter (not included) or a USB port on a computer/power bank.
Image: Illustration showing the battery compartment for four AA batteries and the USB-C port for connecting the power cable to an adapter.
Attaching the Cuff
Connect the air tube from the upper arm cuff securely into the air jack on the side of the blood pressure monitor. Ensure the connection is firm to prevent air leakage during measurement.
Operating Instructions
Before Measurement
- Rest for at least 5 minutes before taking a measurement.
- Avoid eating, drinking alcohol, smoking, or exercising for 30 minutes prior.
- Sit upright with your back supported and feet flat on the floor.
- Place your arm on a table so the cuff is at heart level.
Taking a Measurement
- Apply the Cuff: Wrap the cuff around your bare upper arm, approximately 2-3 cm above the elbow. Ensure the air tube runs down the center of your arm. The cuff should be snug but not too tight (you should be able to insert two fingers).
- Position Your Arm: Rest your arm comfortably on a table with your palm facing upwards.
- Start Measurement: Press the START/STOP button. The monitor will automatically inflate the cuff and begin the measurement process.
- View Results: The reading will be displayed on the screen within approximately 30 seconds. The device will automatically turn off after a few seconds of inactivity.
Image: A person demonstrating how to use the PANACARE Blood Pressure Monitor, showing the cuff placed on the upper arm and the monitor ready for operation.
Understanding the 3-Color Backlit Display
The monitor features a unique 3-color backlit screen to provide immediate visual feedback on your blood pressure readings, based on standard guidelines:
- Green: Indicates a normal blood pressure reading (below 140mmHg).
- Light Yellow: Indicates mild to moderate hypertension (140-180mmHg).
- Red: Indicates severe hypertension (above 180mmHg).
Image: Three views of the monitor display, showing how the backlight changes from green (normal), to yellow (mild to moderate hypertension), and red (severe hypertension) based on the measurement.
Dual-User Mode and Data Storage
The monitor supports two individual users, each capable of storing up to 99 records with corresponding date and time stamps. This feature allows for easy tracking of personal blood pressure trends.
- Switching Users: Use the SET button to toggle between User 1 and User 2 before taking a measurement.
- Viewing Memory: Press the MEM button to review past readings for the currently selected user.
Image: The monitor display indicating two user profiles (User 1 and User 2) and their respective stored blood pressure readings.
Maintenance
Cleaning
Wipe the monitor and cuff with a soft, dry cloth. If necessary, use a cloth lightly dampened with water or a mild detergent, then wipe dry. Do not use abrasive cleaners or immerse the device in water.
Storage
Store the device in its carrying case in a cool, dry place, away from direct sunlight, extreme temperatures, and humidity. Keep it out of reach of children.
Battery Replacement
If using batteries, replace all four AA batteries when the low battery indicator appears on the display or if the device fails to power on. Ensure correct polarity when inserting new batteries.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Low or dead batteries; USB cable not connected properly. | Replace batteries; ensure USB cable is securely connected to both the monitor and power source. |
| Inaccurate readings. | Improper cuff placement; movement during measurement; not resting before measurement. | Re-apply cuff correctly; remain still and silent during measurement; rest for 5 minutes before measuring. |
| Cuff does not inflate or inflates weakly. | Air tube not connected; air leakage from cuff or tube. | Ensure air tube is firmly connected; check cuff and tube for any damage or leaks. |
| Display shows error message. | Measurement error; irregular heartbeat detected. | Repeat measurement after resting; consult a healthcare professional if irregular heartbeat persists. |
If problems persist after attempting these solutions, please contact customer support.
Specifications
- Model Number: BSX558
- Product Dimensions: 3.54"L x 4.56"W x 2.59"Th
- Cuff Size: 22-40cm (8.7 inches - 15.8 inches)
- Display Type: LCD with 3-color backlight
- Power Source: 4 x AA Batteries (not included) or USB Cable (included)
- Memory: 2 users, 99 records per user with date/time stamp
- Measurement Method: Oscillometric
- Measurement Range: Blood Pressure: 0-299 mmHg; Pulse: 40-199 beats/minute
- Accuracy: Pressure: ±3 mmHg; Pulse: ±5% of reading
- Manufacturer: Shenzhen BSX Technology Electronics Co., Ltd.
- Country of Origin: China
Warranty and Support
For any questions, concerns, or technical support regarding your PANACARE Blood Pressure Monitor, please contact our customer service team. While specific warranty details are not provided in this manual, please retain your purchase receipt for any warranty claims.
You can typically find contact information for customer support on the product packaging or by visiting the official P PANACARE store on Amazon: P PANACARE Store.
Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This device is intended for home use and should not replace professional medical advice.
