Introduction
The Penlike Stylus Pen is designed to enhance your iPad experience, offering precision and versatility for various tasks, from note-taking and digital art to general navigation. This manual provides essential information for setup, operation, and maintenance of your new stylus pen.

Image: The Penlike Stylus Pen in its packaging, alongside extra tips.
Compatibility
This stylus pen is compatible exclusively with iPad models released from 2018 onwards. Please verify your iPad model before use to ensure full functionality.
- iPad Air: 11-inch (2025-2024, M3/M2), 13-inch (2025-2024, M3/M2), 5th/4th/3rd Gen
- iPad Pro: 11-inch (2024, M4; 2022-2018), 13-inch (2024, M4), 12.9-inch (2022-2018)
- iPad: A16/11th Gen (2025), 10th Gen (2022), 9th/8th/7th/6th Gen
- iPad Mini: A17 Pro/7th/6th/5th Gen
To confirm your model, navigate to Settings > General > About on your iPad.

Image: Detailed compatibility chart showing supported iPad models and generations.
Setup
- Powering On/Off: Press the button located on the top of the stylus pen to turn it on or off. Green indicator lights will illuminate when powered on.
- Initial Setup: No Bluetooth pairing is required for basic functionality. Simply power on the stylus.
- Disconnection from Apple Pencil: If your iPad was previously connected to an Apple Pencil, ensure it is disconnected before using the Penlike Stylus Pen. Go to Settings > Bluetooth > Apple Pencil > Forget This Device. Also, turn off "Only Draw with Apple Pencil" in Settings > Apple Pencil.
- Charging: The stylus features Type-C fast charging. Fully charge the pen in approximately 15 minutes for up to 9 hours of continuous use. The power display lights indicate the battery level.

Image: Visual guide for powering on, charging, and disconnecting from previous Apple Pencils.
Operating Instructions
- Palm Rejection: Rest your hand comfortably on the iPad screen while writing or drawing without interference. The stylus will accurately register only the pen's input.
- Tilt Sensitivity: Adjust the angle of the stylus to create varying line thicknesses and shading effects, similar to a traditional pencil.
- Magnetic Adsorption: The stylus can magnetically attach to compatible iPads (2018-2025 models) for convenient storage. Note: This feature does not support magnetic charging.
- General Usage: The Penlike Stylus Pen is ideal for note-taking, digital art, sketching, and precise navigation within your iPad's interface.

Image: Demonstration of palm rejection, allowing natural hand placement on the screen.

Image: Visual representation of how tilt sensitivity affects line thickness at different angles.

Image: Examples of the stylus pen being used for note-taking, digital art, and sketching.
Maintenance
- Charging: To maintain optimal battery life, charge the stylus using the provided USB-C cable when the indicator lights show low power. A full charge takes approximately 15 minutes. The stylus will enter sleep mode after 5 minutes of inactivity to conserve power.
- Tip Replacement: The stylus comes with additional replaceable pen tips. To replace a tip, gently twist the old tip counter-clockwise to remove it, then twist a new tip clockwise until secure.
- Cleaning: Use a soft, lint-free cloth (such as a microfiber cloth, often included) to gently wipe the stylus body and tip. Avoid abrasive materials or harsh chemicals.

Image: Infographic detailing 15-minute full charge, 9 hours working time, and 5-minute auto-sleep.
Troubleshooting
If you encounter any issues with your Penlike Stylus Pen, please refer to the following common solutions:
- Stylus Not Responding:
- Ensure the stylus is powered on and fully charged.
- Verify that your iPad's iOS system is updated to iOS 12.2 or above.
- Restart your iPad.
- Confirm that no other Apple Pencil is connected to your iPad (see Setup section for disconnection steps).
- Inaccurate or Lagging Performance:
- Check if the pen tip is securely attached. Replace if worn or damaged.
- Ensure your iPad screen is clean and free of smudges.
- Magnetic Adsorption Not Working:
- Confirm your iPad model is from 2018 onwards, as older models may not support magnetic attachment.
Specifications
| Feature | Detail |
|---|---|
| Model Number | WKZP010EA |
| Color | White |
| Material | Aluminum |
| Item Weight | 2.89 ounces (0.08 Kilograms) |
| Battery Type | 1 Lithium Polymer battery (included) |
| Charging Time | 15 minutes for full charge |
| Battery Life (Working) | Up to 9 hours |
| Auto Sleep | After 5 minutes of inactivity |
| Features | Palm Rejection, Tilt Sensitivity, Magnetic Adsorption (no charging) |
Support
For any issues, missing items, delivery damage, compatibility concerns, or defective products, please contact our customer support team. We aim to respond within 24 hours.
Email: penservice@hotmail.com