Introduction
The SKMEI Model 2325 is a versatile digital sport watch designed for daily wear and active lifestyles. It features a clear digital display, water resistance up to 50 meters, an EL backlight for low-light conditions, and essential functions like date, week, and a countdown timer. This manual provides detailed instructions for optimal use and care of your watch.
Front view of the SKMEI Model 2325 Digital Sport Watch, showcasing its rectangular display and white silica gel band.
Key Features
- Digital Display: Clear and easy-to-read time and information.
- 50M Water Resistance: Suitable for swimming and showering. Not for diving or hot water.
- EL Backlight: Electroluminescent light for visibility in dark environments.
- Multi-Functional: Displays time, date, and week. Includes a countdown timer.
- Durable Construction: PC case, resin crystal, and silica gel band for comfort and longevity.
- 12/24-Hour Format: Supports both standard and military time displays.
An overview of the watch's key features, including its digital display, rectangular shape, and functions like date, week, EL light, and countdown timer.
Button Functions
The SKMEI 2325 watch features two buttons on the right side for operation:
- MODE Button: Used to cycle through different display modes (Time, Date, Countdown Timer) and to enter/exit setting modes.
- SET/EL Button: Used to adjust values in setting modes and to activate the EL backlight.
Close-up view of the watch face, highlighting the 'MODE' and 'SET/EL' buttons on the side.
Operating Instructions
1. Time and Date Setting
- From the normal time display, press the MODE button three times to enter the time setting mode. The seconds will flash.
- Press the SET/EL button to reset seconds to zero.
- Press the MODE button once to move to the hour setting. The hour digits will flash.
- Press the SET/EL button to adjust the hour. (Note: 'P' indicates PM for 12-hour format).
- Press the MODE button once to move to the minute setting. The minute digits will flash.
- Press the SET/EL button to adjust the minutes.
- Continue pressing the MODE button to cycle through month, date, and day of the week settings, adjusting each with the SET/EL button.
- After setting all values, press the MODE button again to return to normal time display.
2. 12/24-Hour Format
In the time setting mode (when hours are flashing), press the SET/EL button to toggle between 12-hour and 24-hour (military) time formats. In 12-hour format, 'P' indicates PM.
3. EL Backlight
Press the SET/EL button once from any mode (except setting modes) to activate the Electroluminescent (EL) backlight. The light will illuminate the display for a few seconds, allowing for easy reading in low-light conditions.
4. Countdown Timer
The watch includes a countdown timer function. To access and set the countdown timer:
- Press the MODE button until "CD" or "COUNTDOWN" appears on the display.
- To set the countdown time, press and hold the SET/EL button until the digits flash.
- Use the MODE button to select hours, minutes, or seconds, and the SET/EL button to adjust the values.
- Once set, press MODE to exit setting. Press SET/EL to start/pause the countdown.
- When the countdown reaches zero, an alarm will sound.
Maintenance and Care
- Cleaning: Wipe the watch regularly with a soft, dry cloth. For the silica gel band, a mild soap solution and water can be used, followed by thorough drying.
- Water Resistance: The watch is 50M water-resistant. This means it is suitable for swimming and showering. Do not press buttons underwater. Avoid exposure to hot water or steam (e.g., hot showers, saunas) as this can compromise the water seals.
- Battery Replacement: The watch uses a CR1620 battery. When the display dims or functions become erratic, it's time to replace the battery. Battery replacement should ideally be performed by a qualified watch technician to ensure water resistance is maintained.
- Storage: Store your watch in a cool, dry place away from direct sunlight and extreme temperatures.
The back of the watch, indicating its 50M water resistance and battery type (CR1620).
Troubleshooting
- Display is blank or dim: The battery may be low or depleted. Replace the CR1620 battery.
- Time is incorrect: Re-set the time and date following the "Time and Date Setting" instructions. Ensure the 12/24-hour format is correctly selected.
- Buttons are unresponsive: Ensure the watch is not wet. If the issue persists, a reset may be required (consult a technician) or the battery may be low.
- Water inside the watch: Immediately stop using the watch and take it to a professional watch repair service. Water damage is typically not covered under warranty if proper water resistance guidelines were not followed.
Specifications
| Model Name | 2325 |
| Display Type | Digital |
| Movement Type | Quartz |
| Case Material | PC (Polycarbonate) |
| Crystal Material | Resin |
| Band Material | Silica Gel |
| Water Resistance Depth | 50 Meters (5 ATM) |
| Case Diameter | 26 mm |
| Case Thickness | 10.8 mm |
| Band Width | 16 mm |
| Band Length | 235 mm |
| Item Weight | 27.4 g |
| Battery Type | CR1620 (included) |
| Special Features | Waterproof, Lightweight, EL Light (Glow In The Dark), Date, Week, Countdown Timer |
Dimensional diagram of the watch, illustrating its compact size and strap width.
Warranty and Support
Your SKMEI Model 2325 watch comes with a 9-month Manufacturer Warranty from the date of purchase. This warranty covers manufacturing defects under normal use.
For any service-related inquiries, feedback, or warranty claims, please contact SKMEI India Customer Support:
- Helpline: 1800-889-6251
- Operating Hours: Monday to Saturday, 9:00 AM to 6:00 PM (IST)
Please retain your purchase receipt as proof of purchase for warranty validation.
