EXIT TOYS 30.80.16.70

EXIT TOYS ECO Dome Pool 488 cm User Manual

Model: 30.80.16.70

Introduction

This manual provides essential information for the safe and effective installation, operation, and maintenance of your EXIT TOYS ECO Dome Pool 488 cm. The pool dome is designed to enhance your swimming experience by naturally warming the water and keeping it clean.

The EXIT pool canopy ensures natural warming of the bathing water by retaining the sun's heat, thereby extending your swimming season. Furthermore, it acts as a protective barrier, preventing leaves and other debris from entering the pool, which helps keep the water fresh and reduces cleaning efforts.

EXIT TOYS ECO Dome Pool 488 cm installed over a round above-ground pool

Image: The EXIT TOYS ECO Dome Pool 488 cm, a transparent, foldable dome designed to cover round above-ground pools, shown installed and covering a pool.

Safety Warnings

Caution: Carefully follow all instructions provided in this user manual for the safe installation, use, and maintenance of the product. Failure to do so may result in product damage or personal injury.

  • This product is intended for use under adult supervision.
  • Avoid storing or placing the product near heat sources or sharp objects.
  • Improper handling can lead to product damage and potential injuries.

Setup and Installation

The EXIT pool dome is designed for quick attachment to the pool frame and features a unique hinge mechanism for easy opening and closing. Proper installation is crucial for stability and functionality.

Compatibility

This dome is designed to fit specific round above-ground pool models. It is compatible with INTEX Prism Frame, Prism Frame Premium, and Ultra Frame XTR pools with a diameter of ø488cm (16ft), as well as BESTWAY Steel Pro Max pools of ø488cm (16ft).

Diagram showing compatibility with Intex and Bestway pool models

Image: A visual guide illustrating the dome's compatibility with specific Intex and Bestway round above-ground pool models, highlighting the ø488cm (16ft) size.

Installation Guidelines

  • Ensure your pool has round support legs and an even number of spaces between the surrounding edge poles (e.g., 6, 8, etc.). Uneven numbers may prevent the dome from sitting centrally.
  • It is strongly recommended to install the dome when the pool is empty to ensure proper fitting and stability.
  • The dome attaches quickly to the pool frame and is easy to open and close thanks to the unique hinge mechanism.
Children playing in a pool covered by the EXIT TOYS dome, demonstrating ease of assembly and use

Image: Children enjoying a pool covered by the EXIT TOYS dome, illustrating the product's ease of assembly and the convenience of opening and closing the dome.

Fit Guide

Refer to the detailed fit guide below to ensure your pool's dimensions are compatible with the dome's requirements for tube shape, toprail size, and leg size.

Detailed EXIT Pool dome fit guide with measurements for tube shape, toprail, and leg sizes

Image: A technical diagram providing a detailed fit guide for the EXIT Pool dome, including specifications for tube shape, minimum and maximum toprail sizes, and leg sizes, along with pool height and diameter ranges.

Operating Instructions

The EXIT pool dome offers dual benefits: natural water heating and debris protection.

Natural Water Heating

The transparent design of the dome allows sunlight to penetrate and warm the pool water naturally. This passive heating method helps to increase the water temperature, making your pool more enjoyable for longer periods during the swimming season.

Illustration of sun heating pool water under the dome

Image: An illustration depicting the sun's rays warming the pool water through the transparent dome, highlighting the natural heating effect.

Debris Protection

The dome acts as an effective barrier against external elements such as leaves, insects, and other dirt. By keeping these contaminants out, the pool water remains cleaner and fresher for extended periods, reducing the frequency of cleaning and chemical treatments.

Comparison of clean pool water with dome versus dirty water without dome

Image: A comparative image showing a clean and clear pool with the dome installed on one side, and a dirty pool with leaves and debris without the dome on the other, emphasizing the dome's effectiveness in keeping water clean.

Maintenance

Proper maintenance will extend the lifespan of your EXIT pool dome and ensure its continued performance.

Cleaning Instructions

  • Hand wash the dome only with a mild detergent.
  • Avoid using harsh chemicals, as they may damage the material.
  • Dry the dome thoroughly after cleaning to prevent mold formation.

Troubleshooting

This section addresses common issues and concerns that may arise during the use of your pool dome.

Compatibility Issues

  • Issue: The dome does not fit or cannot be securely attached to the pool frame.
  • Possible Cause: The pool's support legs are not round, or the fasteners are not large enough for your specific pool model. The product may not be compatible with all above-ground pools, particularly those with non-round support structures or wider bars (e.g., certain Yzaki pools).
  • Solution: Verify your pool's specifications against the dome's fit guide (see Setup and Installation section). Ensure your pool has round support legs and an even number of pole spaces.

Structural Stability

  • Issue: The dome feels fragile or unstable during assembly or after installation.
  • Possible Cause: Improper assembly, or the dome is not sitting centrally due to an uneven number of pole spaces on the pool.
  • Solution: Re-check all assembly steps to ensure components are securely fastened. Confirm that your pool has an even number of pole spaces for central alignment.

Leakage

  • Issue: Water leakage from the dome structure.
  • Possible Cause: Damage to the dome material or improper sealing during installation.
  • Solution: Inspect the dome for any tears or punctures. Ensure all connections and seals are properly secured according to the installation instructions. If damage is present, contact customer support.

Specifications

Product Dimensions (L x W x H)508 x 508 x 0.01 cm
Item Weight23.9 Kilograms
Product Reference30.80.16.70
Height254 cm
ASINB0DFQ6PB99
ManufacturerEXIT Toys
Item Model Number30.80.16.70
Sizeø488cm/16ft
ColorTransparent, blue
BrandEXIT TOYS
ShapeRound
Closure TypeSlip-on
Installation TypeFloating

Warranty and Support

Return Policy

This product is eligible for a refund or replacement within 30 days of purchase, subject to the seller's return policy.

Manufacturer Support

For further assistance, technical support, or warranty claims, please contact the manufacturer, EXIT Toys. You can find more information on their official website or through the seller's contact details on the purchase platform.

The product is sold by EXIT Toys, a third-party seller. For specific inquiries related to your purchase, please refer to the seller's information provided at the time of purchase.

© 2025 EXIT TOYS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.