Kingshion Hard Headphone Case Instruction Manual

1. Introduction

Thank you for choosing the Kingshion Hard Headphone Case. This manual provides essential information for the proper use, care, and maintenance of your new headphone case. Please read these instructions carefully to ensure optimal protection for your headphones.

2. Product Overview

The Kingshion Hard Headphone Case is designed to provide robust protection for a variety of JBL Tune and Live series headphones. Its durable construction safeguards your headphones from impacts, scratches, and dust during storage and travel. The case features a secure zipper closure and an internal mesh pocket for accessories.

Compatible Headphone Models:

• JBL Tune Series: 510BT, 520BT, 525BT, 500BT, 560BT, 570BT, 600BTNC, 660NC, 670NC
• JBL Live Series: 460NC, 400BT
• Other JBL Models: T450BT, E45BT, E47BT

Figure 2.1: Exterior view of the Kingshion Hard Headphone Case with dual zippers.

Figure 2.2: Interior view of the open case, showing the mesh pocket for accessories.

3. Setup and Usage

This section details how to properly store your headphones in the case.

3.1 Inserting Headphones

1. Open the case by unzipping both zippers completely.
2. Fold or collapse your compatible headphones as compactly as possible, if applicable.
3. Carefully place the headphones into the main compartment of the case, ensuring they fit snugly without excessive force. The soft lining is designed to cushion the headphones.
4. Utilize the internal mesh pocket for storing small accessories such as charging cables or audio cables. Ensure items in the mesh pocket do not press against the headphones when the case is closed.

Figure 3.1: Headphones correctly placed inside the open case.

3.2 Closing the Case

Once your headphones and accessories are securely placed, carefully close the case by pulling the dual zippers together. Ensure no headphone parts or cables are caught in the zipper teeth to prevent damage.

Figure 3.2: The headphone case in a closed state, ready for transport.

4. Maintenance

To ensure the longevity and effectiveness of your Kingshion Hard Headphone Case, follow these simple maintenance guidelines:

• Cleaning: Wipe the exterior of the case with a soft, damp cloth. For stubborn dirt, a mild soap solution can be used, followed by wiping with a clean, damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Interior Care: The interior lining can be gently wiped with a dry or slightly damp cloth. Ensure the interior is completely dry before storing headphones.
• Storage: Store the case in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
• Zipper Care: Periodically check the zippers for any debris. If they become stiff, a small amount of zipper lubricant can be applied.

5. Troubleshooting

If you encounter any issues with your headphone case, consider the following:

• Headphones do not fit: Verify that your headphone model is listed as compatible. Ensure headphones are folded or collapsed to their most compact form. Avoid forcing headphones into the case, as this may cause damage to both the headphones and the case.
• Zipper is stuck: Check for any fabric or foreign objects caught in the zipper teeth. Gently pull the zipper back and forth to dislodge any obstructions. Do not apply excessive force.
• Case appears damaged: Inspect the case for any visible damage. If the structural integrity is compromised, it may not offer adequate protection.

6. Specifications

Detailed specifications for the Kingshion Hard Headphone Case (Model EJB01-08):

Figure 6.1: Dimensions of the Kingshion Hard Headphone Case.

7. Warranty and Support

For any questions, concerns, or support regarding your Kingshion Hard Headphone Case, please refer to the manufacturer's official website or contact their customer service directly. Specific warranty details may vary and are typically provided with your purchase documentation or on the manufacturer's website.

Manufacturer: Kingshion

For further assistance, please visit the Kingshion Store on Amazon.