Insoma WiFi Hose Timer Instruction Manual

Product Overview

The Insoma WiFi Hose Timer is a smart water timer designed for garden, lawn, and yard irrigation. It features a durable brass inlet and outlet, voice and app control capabilities, and various watering modes including rain delay, manual, and automatic scheduling. This energy-saving device integrates with smart home systems like Alexa and Google Home for enhanced convenience.

Figure 1: Insoma WiFi Hose Timer and accompanying smart hub.

Setup

1. Physical Installation

The Insoma WiFi Hose Timer features an upgraded brass swivel inlet and outlet for enhanced durability and leak prevention. The brass threads are designed to withstand high working pressure (max 116 psi) and resist deformation under direct sunlight. A built-in metal filter gasket prevents sediment and larger particles from entering your irrigation system.

• Ensure your outdoor faucet is clean and free of debris.
• Screw the brass inlet of the hose timer onto your outdoor faucet. The swivel design allows for easy installation without twisting the entire unit.
• Connect your garden hose or irrigation system to the brass outlet of the timer.
• Ensure all connections are hand-tight to prevent leaks.

Figure 2: Detail of the upgraded brass swivel inlet and built-in metal filter.

2. App Download and Pairing

The Insoma WiFi Hose Timer connects to the Smart Life APP via a 2.4 GHz WiFi connection. A WiFi hub is required to enable smart control features. One WiFi hub can support up to 32 watering timers.

1. Download the "Smart Life" app from your smartphone's app store (available for iOS and Android).
2. Plug in the Insoma WiFi Hub within range of your home's 2.4GHz WiFi network.
3. Open the Smart Life app and follow the in-app instructions to add the WiFi Hub. Ensure your phone's WiFi is set to 2.4GHz.
4. Once the hub is connected, add the WiFi Hose Timer within the app. The timer supports both Bluetooth and 2.4GHz WiFi connections through the hub.

Figure 3: App remote control setup, illustrating the connection between the timer, WiFi hub, and smartphone app.

Figure 4: Create your smart watering system by connecting multiple timers to one hub.

Operating Modes

1. Flexible Watering Programs (App Control)

The Smart Life app allows you to set up to 20 independent watering programs, customizing start time, frequency, and duration. Two primary irrigation modes are available:

• Normal Schedule: The timer runs on its own, watering at specific times you define.
• Cycle/Soak: The timer automatically cycles watering at preset start and end times, breaking down watering into multiple cycles to allow soil to soak water efficiently.

Figure 5: Normal Schedule Mode interface in the Smart Life app.

Figure 6: Cycle & Soak Mode interface in the Smart Life app.

Figure 7: Overview of smart control features available in the app.

2. Voice Control

The WiFi Hose Timer is compatible with Alexa and Google Assistant, allowing you to control your watering system with simple voice commands.

• Ensure your Insoma WiFi Hose Timer is linked to your Alexa or Google Home account through the Smart Life app.
• Use commands such as: "Alexa, turn on the WiFi Water Timer" or "Hey Google, start watering the garden."

Figure 8: Voice control integration with smart assistants.

Figure 9: Smart voice control for hands-free operation.

3. Rain Delay Mode

The Rain Delay Mode helps prevent over-watering and conserves water. You can pause your programmed schedule for 24, 48, or 72 hours. The schedule will automatically resume after the selected delay period.

• Access the Rain Delay option within the Smart Life app.
• Select the desired delay duration (24h, 48h, or 72h).
• Confirm your selection to activate the rain delay.

Figure 10: Rain Delay feature to save water during rainy conditions.

Figure 11: Rainy Delay options in the app interface.

4. Manual Mode

For on-demand watering, the manual mode allows you to water any lawn or garden area without interrupting your pre-set schedule. You can customize watering times from 1 minute to 24 hours.

• Via App: Open the Smart Life app, select the timer, and initiate manual watering for a specified duration (1 minute to 24 hours).
• Via Timer Button: Press the button on the timer itself for quick manual watering (typically for 1-10 minutes, depending on model configuration).

Figure 12: Personalized manual watering via app or timer button.

Figure 13: One-button watering for immediate needs.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your Insoma WiFi Hose Timer.

• Filter Cleaning: Regularly inspect and clean the built-in metal filter gasket to prevent clogs from sediment and debris. Remove the timer from the faucet, unscrew the inlet, and rinse the filter under running water.
• Winterization: Before freezing temperatures, disconnect the timer from the faucet and store it indoors in a dry, protected area to prevent damage from freezing water.
• Battery Check: The Smart Life app provides low battery reminders. Replace batteries promptly to ensure continuous operation.
• General Cleaning: Wipe the exterior of the timer with a damp cloth as needed to remove dirt and grime. Avoid using harsh chemicals.

Figure 14: Key features including low battery reminder and durable brass components.

Troubleshooting

Specifications

• Brand: Insoma
• Model: Hose Timer
• Color: Gray Orange
• Product Dimensions: 2"D x 4"W x 4"H
• Item Weight: 10.9 ounces (0.68 Pounds)
• Max Working Pressure: 116 psi
• WiFi Connectivity: 2.4GHz Only
• App Compatibility: Smart Life (iOS & Android)
• Voice Control: Alexa, Google Assistant
• Watering Programs: Up to 20 independent programs
• Watering Modes: Normal Schedule, Cycle/Soak, Rain Delay, Manual
• Hub Connectivity: Supports up to 32 timers per gateway
• Country of Origin: China

Warranty and Support

For warranty information, technical support, or further assistance, please refer to the contact details provided on the product packaging or visit the official Insoma website. Keep your purchase receipt for warranty claims.