Bevivog YXM Small Orange Metal Storage Cabinet Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Bevivog YXM Small Orange Metal Storage Cabinet. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Key Features:

• Spacious and Space-saving: Measuring 11.8"D x 23.6"W x 31.5"H, this cabinet offers ample storage while maintaining a compact footprint. It can support a total weight of approximately 250 lbs.
• High-Quality Durable Material: Constructed from cold-rolled steel with an electrostatic powder coating, this cabinet is odorless, waterproof, rust-proof, and easy to clean. Its corrosion-resistant properties make it suitable for humid environments.
• Practical Design: Features two magnetic doors and two adjustable shelves, allowing for flexible organization of items of various heights. The modern, simple design complements diverse home styles.
• Multi-purpose Use: Ideal for use in bathrooms, kitchens, offices, laundries, pantries, bedrooms, living rooms, garages, entryways, and other areas requiring organized storage. The enclosed two-door design helps keep belongings dry and clean.

2. Safety Information

Please observe the following safety guidelines to ensure safe use and prevent injury or damage:

• Always unplug electrical appliances from the power source before cleaning or maintaining the cabinet.
• To prevent tip-over hazards, ensure the cabinet is properly balanced and secured, especially in areas with high foot traffic or where children or pets may be present.
• Do not exceed the maximum weight capacity of 100 lbs for the top surface and 50 lbs per adjustable shelf.
• Keep small parts and assembly tools away from children during assembly.

3. Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Cabinet Panels (Top, Bottom, Sides, Back)
• Adjustable Shelves (2)
• Doors (2)
• Legs/Base Frame
• Door Handles (2)
• Magnetic Door Catches
• Shelf Pins
• Assembly Hardware (screws, washers, etc.)
• Assembly Tools (screwdriver, gloves)

4. Setup and Assembly Instructions

Follow these steps carefully to assemble your storage cabinet. It is recommended to assemble the cabinet on a soft, clean surface to prevent scratches.

Assembly Video Guide:

Step-by-Step Assembly:

1. Unpack Components: Carefully open the packaging and lay out all parts on a protected surface. Refer to the included parts list to ensure all items are present.
2. Assemble the Base Frame: Attach the adjustable feet to the bottom frame pieces (H*2) and secure them.
3. Attach Side Panels: Connect the side panels (A*1) to the base frame using the provided screws (R*4). Ensure the pre-drilled holes align.
4. Install Top Panel: Place the top panel (C*1) onto the assembled side panels and secure it with screws (R*4).
5. Attach Back Panels: Slide the back panels (B*2) into the grooves on the side and top panels, then secure them with screws (R*10) from the back.
6. Insert Shelf Pins: Insert the shelf pins (O*8) into the desired height adjustment holes on the side panels.
7. Place Adjustable Shelves: Carefully place the adjustable shelves (D*3) onto the shelf pins.
8. Attach Doors: Align the doors (E*1, F*1) with the cabinet frame and attach them using the provided hinges and screws (S*1). Ensure the doors open and close smoothly.
9. Install Magnetic Catches: Attach the magnetic door catches (Q*2) to the top inner frame and the corresponding metal plates (Z*2) to the inside of the doors to ensure secure closure.
10. Attach Door Handles: Secure the door handles (T*2, U*2) to the front of each door using the provided screws.

Figure 1: The fully assembled Bevivog small orange metal storage cabinet. The two doors are open, showcasing the interior with two adjustable shelves. Various items such as rolled towels, bottles, and a woven basket are neatly stored inside, demonstrating its storage capacity.

Figure 2: This diagram provides key measurements of the cabinet: 31.50 inches in height, 23.62 inches in width, and 11.81 inches in depth. It also indicates the weight capacity, with the top surface supporting up to 100 lbs and each adjustable shelf supporting up to 50 lbs.

5. Operating Instructions

Adjusting Shelves:

The cabinet features two adjustable shelves to accommodate items of varying heights. To adjust a shelf:

1. Empty the shelf of all contents.
2. Carefully lift the shelf and remove the four shelf pins supporting it.
3. Reinsert the shelf pins into the desired height adjustment holes on the side panels. Ensure all four pins are securely in place and at the same level.
4. Place the shelf back onto the pins, ensuring it is stable before placing items on it.

Opening and Closing Doors:

The cabinet doors are equipped with magnetic catches for secure closure. To open, gently pull the handle. To close, push the door until the magnetic catch engages.

6. Maintenance

Regular maintenance will help prolong the life and appearance of your cabinet.

Cleaning:

• Wipe the cabinet surfaces with a soft, damp cloth.
• For stubborn marks, use a mild soap solution and then wipe dry immediately to prevent water spots.
• Avoid using abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.

General Care:

• Periodically check all screws and connections to ensure they are tight. Retighten if necessary.
• Avoid placing excessively hot or cold items directly on the cabinet surface without protection.
• Ensure the cabinet is placed on a level surface to maintain stability.

Figure 3: This image illustrates the cabinet's construction, highlighting layers of thick steel panel, rust-resistant coating, and powder coating. It also shows a hand wiping water off the cabinet surface, demonstrating its waterproof design and ease of cleaning.

7. Troubleshooting

If you encounter any issues with your cabinet, refer to the following common solutions:

• Cabinet is Unstable/Wobbly: Ensure all screws are tightened. Check if the cabinet is on a level surface; adjust the leveling feet if necessary.
• Doors Do Not Close Properly: Verify that the magnetic catches are correctly installed and aligned with the metal plates on the doors. Check for any obstructions.
• Difficulty During Assembly: Review the assembly video and step-by-step instructions. Ensure all parts are oriented correctly. Do not force components together.

For further assistance, please contact Bevivog customer support.

8. Specifications

9. Warranty and Support

For warranty information, product support, or to report missing/damaged parts, please contact Bevivog customer service through the retailer where the product was purchased. Please have your model number (YXM) and purchase date available when contacting support.