SOUNDPEATS PearlClip Open-Ear Headphones User Manual

1. Product Overview

The SOUNDPEATS PearlClip are open-ear headphones designed for comfort and situational awareness. They feature an ear-clip design that rests gently on your ear, allowing you to hear your surroundings while enjoying audio. Equipped with Bluetooth 5.4 and 12mm dynamic drivers, these headphones deliver clear sound with rich bass and offer up to 24 hours of total playback time with the charging case.

2. Package Contents

• SOUNDPEATS PearlClip Open-Ear Headphones (Left and Right)
• Charging Case
• Type-C Charging Cable
• User Manual (Japanese)

3. Setup

3.1 Initial Charging

Before first use, fully charge the headphones and the charging case. Place the earbuds into the charging case. Connect the Type-C charging cable to the charging port on the case and a power source. The indicator light on the case will show charging status.

3.2 Wearing the Headphones

The PearlClip headphones are designed to clip onto your ear. Ensure the sound outlet is positioned correctly near your ear canal for optimal sound quality and comfort.

Image: This illustration shows the correct wearing position (center) and incorrect positions (left and right) for the PearlClip headphones. The correct method involves gently clipping the earbud onto the earlobe, ensuring the sound outlet is aligned with the ear canal.

Identify the front and back of each earbud. The sound hole is located on the front side, and the charging terminals are on the back side.

Image: This image displays the front and back of the PearlClip earbuds. The front side is labeled '前側 (サウンドホール)' indicating the sound hole, and the back side is labeled '後ろ側 (充電端子)' indicating the charging terminals.

3.3 Bluetooth Pairing

1. Open the charging case. The earbuds will automatically enter pairing mode, and the indicator light will flash.
2. Enable Bluetooth on your device (smartphone, tablet, etc.).
3. Search for "SOUNDPEATS PearlClip" in the Bluetooth device list and select it to connect.
4. Once connected, a voice prompt will confirm successful pairing.

If pairing fails, turn off the earbuds, disable Bluetooth on your device, and repeat the steps. For subsequent uses, the earbuds will automatically connect to the last paired device when removed from the case.

4. Operating Instructions

The PearlClip headphones feature touch controls on the outer surface of each earbud.

Image: This image highlights the touch panel area on the PearlClip earbud, indicated by a red circle and the label 'タッチパネル'. The earbud is shown next to its open charging case.

4.1 Basic Touch Controls

Note: Some functions may be customizable via the SOUNDPEATS app. Refer to the app for detailed customization options.

4.2 Power On/Off

• Power On: Open the charging case, and the earbuds will automatically power on. Alternatively, press and hold the touch panel for 1.5 seconds.
• Power Off: Place the earbuds back into the charging case and close the lid. Alternatively, press and hold the touch panel for 10 seconds (this duration can be long, as noted in user reviews).

5. Maintenance

5.1 Cleaning

• Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth.
• Do not use harsh chemicals, cleaning solvents, or strong detergents.
• Ensure charging contacts on both earbuds and case are clean and dry to prevent charging issues.

5.2 Storage

• Store the headphones in their charging case when not in use to protect them from dust and damage.
• Avoid storing in extreme temperatures (hot or cold) or high humidity.

5.3 Battery Care

• To prolong battery life, avoid fully discharging the battery frequently.
• Charge the headphones regularly, even if not used for extended periods.

6. Troubleshooting

6.1 No Sound or Intermittent Connection

• Ensure both earbuds are charged.
• Check that the earbuds are properly paired with your device.
• Move closer to your device and away from potential interference sources (e.g., Wi-Fi routers, other Bluetooth devices).
• Try resetting the earbuds (see 6.3).

6.2 Earbuds Not Charging

• Ensure the charging cable is securely connected to both the case and the power source.
• Verify that the charging contacts on the earbuds and inside the case are clean and free of debris.
• Try using a different Type-C charging cable or power adapter.

6.3 Factory Reset

If you experience persistent issues, a factory reset may resolve them:

1. Place both earbuds back into the charging case.
2. Press and hold the reset button (usually located inside the charging case or on the back) for approximately 10 seconds until the indicator lights flash, indicating a successful reset.
3. Remove the earbuds from your device's Bluetooth list and re-pair them.

7. Specifications

8. Warranty and Support

SOUNDPEATS products come with a warranty. Please refer to the warranty information provided with your purchase or visit the official SoundPEATS website for details regarding warranty periods and terms.

For technical support, troubleshooting assistance, or any product-related inquiries, please contact SoundPEATS customer service. You can often find support contact information on the official SoundPEATS website or through the retailer where you purchased the product.

You can also visit the SoundPEATS Brand Store on Amazon for more product information and support resources.