GESIPOR 32"x19" Double Stone Resin Bathroom Sink Instruction Manual

Introduction

Thank you for choosing the GESIPOR 32"x19" Double Stone Resin Bathroom Sink. This wall-mounted rectangular vessel sink is designed for modern bathrooms, powder rooms, checkrooms, or utility rooms, offering both functionality and aesthetic appeal. Crafted from solid white stone resin, it is smooth, durable, and easy to clean. This manual provides detailed instructions for safe installation, operation, and maintenance to ensure optimal performance and longevity of your new sink.

Safety Information

Please read and understand all safety warnings before proceeding with installation or use. Failure to follow these instructions may result in injury or damage to the product.

• Always use appropriate safety gear, including gloves and eye protection, when installing.
• Be cautious of sharp edges and heavy lifting. It is recommended to have at least two people for installation due to the weight of the sink.
• Keep the area around the sink clear during and after installation to prevent tripping hazards.
• Do not exceed the weight limit of the sink or the mounting brackets. Ensure the wall structure can support the combined weight of the sink and its contents.
• Ensure all plumbing connections are secure and leak-free before regular use.
• Do not use abrasive cleaners or harsh chemicals on the stone resin surface, as this may cause damage.

Package Contents

Verify that all components listed below are included in your package. If any parts are missing or damaged, please contact GESIPOR customer support.

• Bathroom Sink (1 unit)
• Shelf Layer (1 unit)
• Bottle Trap (1 unit)
• Sand Sponge (1 unit)
• Installation Hardware (screws, anchors, brackets)

Note: Faucet for 1.37" faucet hole must be purchased separately.

Figure 1: Included Components

Specifications

Figure 2: Product Dimensions

Installation Instructions

Self-assembly is required. An installation manual is included for reference. Please follow these steps carefully. It is recommended to have two people for installation.

1. Unpack and Inspect: Carefully remove all components from the packaging. Inspect for any damage or missing parts. Keep all packaging materials until installation is complete.
2. Measure and Mark: Determine the desired height for your sink. Use a measuring tape and level to mark the precise locations for the wall mounting brackets on your bathroom wall. Ensure the marks are level and spaced correctly according to the sink's dimensions.
3. Prepare Wall: Drill pilot holes at the marked locations. If installing on drywall, ensure to reinforce the wall with 2x6 studs or appropriate blocking for secure mounting. Insert wall anchors into the drilled holes.
4. Install Brackets: Securely attach the wall mounting brackets to the wall using the provided screws and a drill. Ensure they are firmly fixed and level.
5. Attach Sink to Brackets: Carefully lift the sink and align it with the installed brackets. Secure the sink to the brackets using the appropriate hardware.
6. Install Shelf: Position the shelf layer below the sink, aligning it with its designated mounting points. Secure the shelf to its brackets.
7. Connect Plumbing: Install the bottle trap to the sink's drain opening. Connect the bottle trap to your existing plumbing system. Ensure all connections are tightened to prevent leaks. Install your faucet (purchased separately) according to its manufacturer's instructions.
8. Seal Edges: Apply a bead of silicone sealant around the edges where the sink meets the wall to prevent water infiltration and provide a clean finish.
9. Final Check: Turn on the water supply and check for any leaks. Test the faucet and drainage.

Figure 3: Installed Sink with Shelf

Operating Instructions

Your GESIPOR stone resin sink is designed for daily bathroom use. The rectangular basin features a beveled surface for quick and efficient water drainage, preventing water accumulation.

• Use the sink for washing hands, face, and other typical bathroom activities.
• The integrated countertop provides space for small items like soap dispensers or toothbrushes.
• The lower shelf can be used for storing slightly larger items or additional towels.
• The unique cutout design on the sink body serves as a convenient hanging point for towels.

Figure 4: Unique Drainage Design

Figure 5: Sink with Integrated Towel Holder and Shelf

Maintenance

The stone resin material of your GESIPOR sink is designed to be durable and wear-resistant, as well as easy to clean. Regular cleaning will help maintain its pristine appearance.

• Daily Cleaning: For routine cleaning, wipe the sink surface with a soft cloth and mild soap or a non-abrasive bathroom cleaner. Rinse thoroughly with water and dry with a clean cloth to prevent water spots.
• Stain Removal: The material is designed to be resistant to bleeding and staining. For stubborn stains, use the provided sand sponge or a non-abrasive scrubbing pad with a mild cleaner. Always test on an inconspicuous area first.
• Avoid Harsh Chemicals: Do not use abrasive powders, steel wool, strong acids, or alkaline cleaners, as these can damage the surface finish.
• Prevent Scratches: Avoid dropping heavy or sharp objects onto the sink surface to prevent chipping or scratching.

Troubleshooting

If you encounter any issues with your GESIPOR sink, please refer to the following common troubleshooting tips:

Warranty and Support

GESIPOR stands behind the quality of its products. For warranty information, product support, or to purchase replacement parts, please contact our customer service team.

Customer Service: Please refer to the contact information provided on your purchase receipt or visit the official GESIPOR website for assistance.

Online Resources: For additional support, installation videos, and product information, visit the GESIPOR Store on Amazon.