HiLUNDA H001 2-in-1 Electric Nail Drill and Makeup Brush Cleaner User Manual

Introduction

Thank you for choosing the HiLUNDA H001 2-in-1 Electric Nail Drill and Makeup Brush Cleaner. This versatile device is designed to simplify your beauty routine by offering both precise nail care and efficient makeup brush cleaning. Featuring a quiet 20000RPM brushless motor, three-speed settings, and a 1500 mAh rechargeable battery, the H001 provides a convenient and hygienic solution for maintaining your nails and makeup tools.

Safety Information

Please read this User Manual carefully before using this product and follow all safety guidelines to ensure safe and proper operation.

• Keep the device away from water and moisture.
• Do not disassemble or attempt to repair the device yourself.
• Keep out of reach of children.
• Use only the provided charging cable.
• Avoid contact with eyes and open wounds when operating.

Package Contents

The HiLUNDA H001 package includes the following items:

• 1 x Main Handle (Electric Nail Drill / Brush Cleaner Base)
• 1 x Washing Component (for makeup brushes)
• 1 x Nail File Kit (6 interchangeable drill bits)
• 1 x USB Type-C Charging Cable
• 1 x Nailfile Fixing Component (adapter for nail drill bits)
• 1 x Ceramic Nail File (additional nail drill bit)
• 1 x User Manual

Setup and Charging

Charging the Device

1. Connect the provided USB Type-C charging cable to the charging port on the main handle.
2. Connect the other end of the cable to a compatible USB power source (e.g., wall adapter, computer USB port).
3. The charging status indicator will flash during charging and remain solid when fully charged. A full charge takes approximately 3 hours.

Operating the Electric Nail Drill

Attaching Nail Drill Bits

1. Ensure the device is turned off.
2. Insert the desired nail drill bit into the Nailfile Fixing Component.
3. Screw the Nailfile Fixing Component onto the top of the main handle until secure.

Using the Nail Drill

1. Press and hold the power button for 2 seconds to turn on the device.
2. Select your desired speed (Low, Medium, High) using the speed adjustment button. The device offers up to 20000 RPM.
3. Gently apply the rotating drill bit to your nails for shaping, filing, polishing, or removing nail polish, acrylic, or dip powder.
4. After use, press and hold the power button for 2 seconds to turn off the device.

Multifunctional Drill Bits

The included nail file kit contains various bits for different purposes:

• Cylindrical Flint Stone: Polish nails and remove cuticles.
• Conical Flint Stone: Trim and shape nails, remove cuticles.
• Disc Flint Stone: Clean cuticles and remove dead skin. Used for polishing and smoothing edges.
• Soft Bristle Head: Gently clean nail roots and nail surfaces. Suitable for waxing and polishing.
• Corn-shaped Ceramic Head: For removing nail polish, nail tips.
• Bullet Head: Refine cuticles and remove excess skin. Sanding uneven parts of nails, removing nail edges and base glue.

Operating the Makeup Brush Cleaner

Attaching the Washing Component

1. Ensure the device is turned off.
2. Securely attach the Washing Component to the top of the main handle, ensuring it is firmly in place.
3. Insert the makeup brush vertically into the bottom of the Washing Component. (Failure to do so will prevent normal operation). The component is suitable for brushes 3-36 mm in diameter.

Cleaning Makeup Brushes

1. Pour water into a container (not included) below half its capacity and add a suitable cleaning agent.
2. Before switching on the power, dip the makeup brush into the solution to prevent spills.
3. Press and hold the power button for 2 seconds to turn on the device.
4. Select your desired speed (Low, Medium, High) using the speed adjustment button.
5. When cleaning, avoid letting the makeup brush touch the bottom or sides of the container to prevent tilting and ineffective cleaning.
6. After washing, switch off the power in the solution before removing the brushes.
7. Take the cleaned brushes to a safe place for drying (away from the power source) to avoid splashing liquid around.
8. For thorough cleaning, you can wash the brush again with clean water to remove residual detergent, and then dry it.

Maintenance

Cleaning the Device

• After each use, especially with the nail drill, gently wipe the device and attachments with a clean, dry cloth to remove any dust or debris.
• For the washing component, rinse it thoroughly with water after cleaning brushes and allow it to air dry.
• Do not immerse the main handle in water.

Storage

• Store the device and all accessories in a cool, dry place, away from direct sunlight and extreme temperatures.
• Keep the nail drill bits and washing component organized in their respective cases to prevent loss or damage.

Troubleshooting

• Device not turning on: Ensure the device is fully charged. Press and hold the power button for 2 seconds.
• Nail drill bit falling out: Ensure the nail drill bit is securely inserted into the Nailfile Fixing Component and that the component is tightly screwed onto the main handle.
• Ineffective brush cleaning: Ensure the makeup brush is inserted vertically into the Washing Component and does not touch the container's bottom or sides. Check that the cleaning solution is adequate.
• Brush not drying properly: Ensure the brush is spun at a high speed after cleaning to remove excess water.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official HiLUNDA website. Keep your purchase receipt as proof of purchase for any warranty claims.