Introduction
This manual provides instructions for the assembly, operation, maintenance, and troubleshooting of your GarveeHome 3-Piece Bar Table and Chairs Set. This set is designed for compact spaces, offering a functional surface and seating for two, along with integrated storage solutions. Please read this manual thoroughly before assembly and use to ensure proper setup and longevity of your product.
This image highlights key features of the bar table set, including the safety-conscious rounded corners, the integrated storage shelf for various items, the sturdy angle iron frame, and the adjustable footpads for stability on uneven surfaces.
Safety Information
- Ensure all components are present and undamaged before beginning assembly.
- Assemble the product on a soft, clean surface to prevent scratches.
- Tighten all fasteners securely, but do not overtighten. Periodically check and retighten fasteners as needed.
- Do not stand or sit on the table.
- Distribute weight evenly on the table and shelves.
- Keep small parts away from children during assembly.
- Use the product only for its intended purpose as a bar table and seating.
Package Contents
Please verify that all the following components are included in your package:
- Bar Table (1 unit)
- Bar Stools (2 units)
- Assembly Hardware (screws, bolts, washers, etc.)
- Assembly Tools (e.g., Allen wrench)
This diagram provides precise measurements for the bar table (36.0 inches length, 19.7 inches width, 35.7 inches height) and the stools (10.7 inches length, 10.7 inches width, 23.5 inches height), along with internal storage dimensions.
Assembly Instructions
Assembly typically takes approximately 45 minutes. Follow the illustrated instructions provided with your product for detailed step-by-step guidance. A general overview of the assembly process is as follows:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a protected surface. Verify all parts are present against the package contents list.
- Assemble Table Frame: Attach the metal frame components to form the base and support structure of the table.
- Install Storage Unit: Secure the storage drawer and shelf components to the main table structure.
- Attach Tabletop: Fasten the tabletop to the assembled frame and storage unit.
- Assemble Stools: Attach the legs to the stool seats, ensuring all connections are secure.
- Final Tightening: Once all parts are assembled, gently tighten all screws and bolts to ensure stability. Do not overtighten.
- Adjust Footpads: Adjust the height-adjustable footpads on the table legs to ensure the table is level and stable on your floor.
Usage Guidelines
The GarveeHome 3-Piece Bar Table and Chairs Set is versatile and suitable for various settings:
- Dining Area: Use as a compact dining solution for two in kitchens, dining rooms, or small apartments.
- Workspace: The table can serve as a computer desk or a casual workspace.
- Storage: Utilize the integrated storage drawer and two shelves for organizing items such as wine bottles, glasses, tableware, or snacks.
- Space-Saving: The stools are designed to fit neatly under the table when not in use, optimizing space in smaller living areas.
The bar table and two stools are shown in a home environment, illustrating how the set fits into a compact space and can be used for meals or as a workspace. The integrated storage is visible on the left side of the table.
This image shows the bar table and stools positioned in a room, with the stools pushed completely under the table. This configuration highlights the set's space-saving feature, making it ideal for smaller living areas.
Care and Maintenance
- Cleaning: For dust or water stains, gently wipe the surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
- Spills: Wipe up spills immediately to prevent staining, especially on the veneered wood boards.
- Fasteners: Periodically check all screws and bolts to ensure they remain tight. Retighten as necessary to maintain stability.
- Placement: Avoid placing the furniture in direct sunlight or near heat sources to prevent warping or fading.
The top portion of the image shows water droplets on the table surface, indicating its waterproof properties. The bottom portion displays the integrated 3-tier side storage rack, suitable for storing items like jars and bottles.
Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Table/Stool is wobbly | Loose fasteners; uneven floor. | Tighten all screws and bolts. Adjust the height-adjustable footpads on the table legs to level the unit. |
| Parts missing or damaged | Shipping damage; packaging error. | Contact GarveeHome customer support with your purchase details for replacement parts. |
| Difficulty assembling | Incorrect step sequence; misaligned parts. | Review the assembly instructions carefully. Ensure parts are oriented correctly before tightening. Do not force parts together. |
Specifications
| Feature | Detail |
|---|---|
| Brand | GarveeHome |
| Model Number | ZHL-PHO_15W1KFLP93d |
| UPC | 198723819112 |
| Color | Retro |
| Style | Industrial |
| Product Dimensions | 36 x 19.7 x 35.7 inches (Table) |
| Item Weight | 51 pounds |
| Assembly Required | Yes |
| Material | MDF and Steel Metal |
Warranty and Support
For specific warranty information regarding your GarveeHome 3-Piece Bar Table and Chairs Set, please refer to the documentation included with your purchase or contact the retailer where the product was acquired. GarveeHome is dedicated to customer satisfaction.
If you require assistance with assembly, have questions about product features, or need to report missing/damaged parts, please contact GarveeHome customer support through the retailer's platform or the official GarveeHome website.