PeriphX Wireless Switch Controller User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your PeriphX Wireless Switch Controller. This controller is designed for use with Nintendo Switch (Switch1/Switch2), Android devices, PC (wired connection), and iOS devices, offering a versatile gaming experience with advanced features such as 6-axis gyro, Turbo function, adjustable vibration, and programmable macro buttons.

2. Package Contents

• 1 x PeriphX Wireless Switch Controller
• 1 x Type-C Charging Cable
• 1 x User Manual

3. Controller Layout

The controller features a standard layout with two analog joysticks, a directional pad (D-pad), A/B/X/Y action buttons, Home button, Capture button, +/- buttons, and shoulder/trigger buttons (L/R/ZL/ZR). Additionally, it includes two programmable back buttons (M1/M2) and a Type-C charging port.

4. Charging the Controller

Before first use, fully charge the controller. Connect the supplied Type-C charging cable to the controller's charging port and the other end to a USB power source (e.g., Nintendo Switch dock, PC, or USB wall adapter). The charging indicator lights will show charging status. A full charge typically takes 3-4 hours.

• Charging Port: Type-C
• Battery Capacity: 1000mAh
• Charging Time: Approximately 3-4 hours

5. Setup and Connection

5.1. Connecting to Nintendo Switch (Wireless)

1. From the HOME Menu, select Controllers, then Change Grip/Order.
2. On the controller, press and hold the Home button for 3-5 seconds until the LED indicators start flashing rapidly.
3. Once connected, the player LED(s) on the controller will light up solid.
4. To wake up the Switch console from sleep mode, press the Home button on the controller.

5.2. Connecting to PC (Wired)

The controller supports wired connection to PC (Windows 7/8/10/11).

1. Connect the controller to your PC using the provided Type-C USB cable.
2. The PC should automatically detect and install the necessary drivers.
3. The controller will function as a wired gamepad.

5.3. Connecting to iOS/Android Devices (Wireless)

1. Ensure Bluetooth is enabled on your iOS or Android device.
2. On the controller, press and hold the Home button for 3-5 seconds until the LED indicators start flashing rapidly.
3. On your device, go to Bluetooth settings and search for available devices.
4. Select "PeriphX Controller" (or similar name) from the list to pair.
5. Once connected, the LED indicators on the controller will become solid.

6. Operating Instructions

6.1. Power On/Off

• Power On: Press the Home button.
• Power Off: Press and hold the Home button for 5 seconds, or the controller will automatically power off after 5 minutes of inactivity when disconnected.

6.2. RGB Lighting Modes

The controller features 7-color RGB lights with 3 customizable modes and 4 levels of adjustable brightness.

• Changing Modes: Refer to the specific button combination in the included quick start guide for cycling through Single-color loop, Fixed single-color, and Multi-color gradient modes.
• Adjusting Brightness: Use the designated button combination (refer to quick start guide) to adjust brightness from 0% to 100% in 4 levels.

6.3. Turbo Function

The Turbo function allows for continuous rapid input of a button press. It offers speeds of 5, 12, or 20 presses per second.

• Activating Turbo: Press and hold the desired action button (A/B/X/Y/L/R/ZL/ZR) and then press the Turbo button (if available, or a specific combination as per quick start guide).
• Adjusting Turbo Speed: While Turbo is active, press the Turbo button and move the right analog stick up or down to cycle through the speeds.
• Deactivating Turbo: Repeat the activation steps, or press and hold the Turbo button and the action button simultaneously.

6.4. Vibration Adjustment

The controller features four levels of HD vibration (0%, 25%, 50%, 75%, 100%) for immersive feedback.

• Adjusting Vibration: Press and hold the Vibration button (if available, or a specific combination as per quick start guide) and move the left analog stick up or down to cycle through vibration intensities.

6.5. Macro Programming (M1/M2 Buttons)

The M1 and M2 back buttons can be programmed to assign custom actions or sequences of button presses.

1. Entering Programming Mode: Press and hold the Macro button (or a specific combination) and the M1/M2 button you wish to program. The indicator light will flash.
2. Recording Input: Press the sequence of buttons you want to assign (e.g., A, B, X, Y, L, R, ZL, ZR, L3, R3, D-pad directions).
3. Exiting Programming Mode: Press the Macro button again. The indicator light will stop flashing, and the macro will be saved.
4. Clearing Macro: To clear a macro, enter programming mode for the specific M1/M2 button and then press the Macro button again without recording any input.

6.6. 6-Axis Gyro Motion Control

The integrated 6-axis gyro sensor provides precise motion control for games that support this feature. No specific calibration is usually required for basic use, but if you experience drift or inaccuracy:

• Place the controller on a flat, stable surface.
• Refer to your console's or game's settings for specific gyro calibration options, if available.

7. Troubleshooting

• Controller will not connect:
  • Ensure the controller is charged.
  • Verify Bluetooth is enabled on your device (Switch, iOS, Android).
  • Ensure the controller is in pairing mode (LEDs flashing rapidly).
  • Try restarting your device and the controller.
  • For Switch, ensure "Pro Controller Wired Communication" is enabled in System Settings if using wired mode.
• Buttons are unresponsive or acting erratically:
  • Ensure the controller is fully charged.
  • Reset the controller by inserting a thin pin into the reset hole (usually on the back).
  • If programmable back buttons (M1/M2) are causing issues, try clearing their programmed macros as described in section 6.5.
• Vibration is not working:
  • Check the vibration intensity settings (section 6.4).
  • Ensure the game you are playing supports vibration feedback.

8. Specifications

9. Maintenance

• Clean the controller regularly with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Avoid exposing the controller to extreme temperatures, direct sunlight, or moisture.
• Store the controller in a safe place when not in use to prevent damage.

10. Warranty and Support

All PeriphX controllers undergo strict testing to ensure quality. We offer a one-year warranty for initial defects or issues from the date of purchase.

For any issues, defects, or support inquiries, please contact our customer service team. We aim to provide fast support within 24 hours.

Contact Method:

• Go to your Order History on Amazon.
• Select the PeriphX Wireless Switch Controller order.
• Click on [Seller | Contact] to reach our support team.