Allewie Queen Size Velvet Lift Up Storage Bed Instruction Manual

1. Introduction

Welcome to the Allewie Queen Size Velvet Lift Up Storage Bed. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

2. Important Safety Information

WARNING:

• Never allow children near the bed when opening and closing the hydraulic lift mechanism to prevent accidents.
• Failure to heed this warning could result in serious injury, suffocation, or even death.
• Ensure the bed frame is fully assembled and all fasteners are tightened before use.
• Do not exceed the maximum weight capacity of 800 pounds for the bed frame.
• Do not exceed the maximum lifting capacity of 110 pounds for the hydraulic mechanism.

3. Package Contents

Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Bed Frame components
• Headboard (Modern Wingback design)
• Hydraulic Lift bars
• Slats (Solid wood)
• Assembly Hardware and Tools

4. Setup and Assembly

Assembly is designed to be straightforward. It is recommended to have two people for certain steps. All necessary tools are included. Follow the detailed diagrams in the provided instruction booklet.

1. Unpack and Identify Parts: Carefully unbox all components and lay them out. Each part is labeled for easy identification.
2. Assemble the Frame: Connect the side rails and footboard to the headboard using the provided hardware. Do not fully tighten screws until all major components are aligned.
3. Install Hydraulic Lift Mechanism: Attach the hydraulic lift bars and associated hardware to the frame. Ensure correct orientation as per diagrams.
4. Insert Slats: Place the solid wood slats into the designated slots on the bed frame. The unique buckles ensure easy and quick installation.
5. Final Tightening: Once all components are in place and aligned, securely tighten all screws and fasteners.

Figure 4.1: Assembled bed frame without mattress.

Figure 4.2: Details of the lifting mechanism and slat buckles.

5. Operating Instructions

The Allewie Lift Up Storage Bed features a hydraulic mechanism for easy access to underbed storage.

1. Lifting the Mattress Platform: To access the storage, firmly grasp the strap or edge of the mattress platform and lift upwards. The hydraulic pistons will assist in smoothly raising the platform.
2. Accessing Storage: Once the platform is raised, the spacious underbed compartment is accessible for storing items such as extra bedding, clothing, shoes, or luggage. The underbed storage height is approximately 10.8 inches.
3. Lowering the Mattress Platform: To close, gently pull the mattress platform downwards. The hydraulic system will control the descent, preventing it from slamming shut. Ensure no objects or body parts are in the way during lowering.

Figure 5.1: Underbed storage in use.

Figure 5.2: Examples of storage capacity.

6. Maintenance

To ensure the longevity and appearance of your Allewie bed frame, follow these maintenance guidelines:

• Cleaning: Wipe the velvet headboard and frame surfaces with a dry cloth. Avoid using harsh chemicals or abrasive cleaners.
• Regular Checks: Periodically inspect all fasteners and connections to ensure they remain tight. Re-tighten if necessary.
• Hydraulic System: The hydraulic lift mechanism is designed for durability. Avoid applying excessive force when lifting or lowering, and do not attempt to disassemble or repair the hydraulic pistons yourself.

7. Troubleshooting

If you encounter any issues with your bed frame, refer to the following common troubleshooting tips:

• Squeaking or Noise: Check all bolts and screws for tightness. Ensure the slats are properly seated in their holders.
• Hydraulic Lift Difficulty: Ensure the mattress weight does not exceed the maximum lifting capacity (110 lbs). If the mechanism feels stiff, ensure no obstructions are present. If issues persist, contact customer support.
• Unstable Frame: Verify that all connections are securely fastened and the bed is placed on a level surface.

8. Specifications

Figure 8.1: Product Dimensions.

Figure 8.2: Modern Wingback Headboard Detail.

9. Warranty and Support

For warranty information or customer support, please refer to the documentation included with your purchase or contact Allewie directly through their official website or the retailer where the product was purchased. Please have your model number (AK-KBMV0004) and UPC (749655425546) ready when contacting support.