Product Overview
This document provides instructions for the Yustda AC power cord, designed as a replacement power supply cable for ZDK Model GC06 and GCO6 Native 1080P WiFi Outdoor Home Movie Mini Projectors. This power cord is engineered with multiple safety features to ensure reliable and secure operation of your compatible projector.
Image: The Yustda AC power cord, coiled, showing the 2-prong US plug on one end and the C7 connector on the other. This cord is designed for compatibility with ZDK GC06/GCO6 mini projectors.
Safety Information
Adhere to the following safety guidelines to prevent damage to the product or injury:
- Ensure the power outlet's voltage and current ratings are compatible with your projector's requirements.
- Do not use the power cord if it exhibits any signs of damage, such as cuts, fraying, or exposed wires.
- Keep the power cord away from water, moisture, and sources of excessive heat.
- Avoid placing heavy objects on the power cord or bending it sharply, which can compromise its integrity.
- Always grasp the plug, not the cable, when disconnecting the power cord from an outlet or device.
- This power cord is intended for indoor use unless explicitly stated otherwise by the projector manufacturer.
Setup
Follow these steps to correctly connect the Yustda AC power cord to your ZDK mini projector:
- Identify the Power Port: Locate the power input port on your ZDK Model GC06/GCO6 mini projector. This port is typically a figure-8 (C8) inlet.
- Connect to Projector: Insert the C7 connector end of the Yustda AC power cord firmly into the projector's power input port. Ensure a snug fit.
- Connect to Power Outlet: Insert the 2-prong US plug end of the power cord into a standard, grounded wall power outlet.
- Verify Connection: Confirm that both ends of the power cord are securely connected before attempting to power on the projector.
Operating Instructions
The Yustda AC power cord functions as a conduit for electrical power to your compatible ZDK mini projector. It does not have operational controls itself.
- Once properly connected as described in the Setup section, the power cord facilitates the flow of alternating current (AC) from the wall outlet to the projector.
- The cord's primary function is power delivery; it does not control the projector's functions such as turning on/off, input selection, or display settings.
- For specific operating instructions related to your ZDK projector, including power-on procedures and feature usage, please refer to the projector's own instruction manual.
Maintenance
Proper maintenance ensures the longevity and safe operation of your power cord:
- Cleaning: Always disconnect the power cord from both the electrical outlet and the projector before cleaning. Wipe the cord with a dry, soft, lint-free cloth. Do not use liquid cleaners, solvents, or abrasive materials.
- Storage: When not in use, coil the cord loosely to prevent kinks and damage to the internal wiring. Avoid tight coiling or bending at sharp angles. Store the cord in a cool, dry place, away from direct sunlight and extreme temperatures.
- Inspection: Periodically inspect the entire length of the cord, including the plugs and connectors, for any signs of wear, damage, or discoloration. If any damage is observed, discontinue use immediately and replace the cord.
Troubleshooting
If your projector is not receiving power, consider the following troubleshooting steps:
Projector Not Receiving Power
- Check Connections: Ensure that both the 2-prong US plug is fully inserted into the wall outlet and the C7 connector is firmly seated in the projector's power input port. A loose connection can prevent power delivery.
- Test Power Outlet: Plug another known-working electrical device into the same wall outlet to confirm that the outlet itself is functional and receiving power. If the outlet is not working, try a different one or check your circuit breaker.
- Inspect Power Cord: Carefully examine the entire length of the Yustda power cord for any visible damage, such as cuts, nicks, fraying, or unusual bends. If any damage is found, the cord should be replaced immediately.
- Projector Issue: If the power cord and the electrical outlet are confirmed to be functional, the issue may lie with the projector itself. In this case, refer to your ZDK projector's instruction manual or contact the projector manufacturer for further assistance.
Specifications
| Feature | Description |
|---|---|
| Product Type | AC Power Cord Replacement |
| Compatibility | ZDK Model GC06, GCO6 Native 1080P WiFi Outdoor Home Movie Mini Projector |
| Input Plug Type | 2-Prong US Plug |
| Output Connector Type | C7 (Figure-8) Connector |
| Safety Features | Overload Protection, Over-charge/discharge protection, Overheating Protection, Short-circuit protection |
| Certifications | FCC, CE, RoHS |
| Manufacturer | Shenzhen Waweis Technology Co., Ltd |
Warranty and Support
The Yustda AC power cord is manufactured with high-quality materials and undergoes strict quality control to ensure performance and safety. For specific warranty details, including coverage period and terms, please refer to the documentation provided at the time of purchase or consult the product listing.
For customer support, technical assistance, or warranty claims, please contact the seller (EPtech) or the manufacturer (Shenzhen Waweis Technology Co., Ltd) directly through their respective customer service channels. Provide your purchase details and product ASIN (B0DDKTLD3S) when seeking support to expedite the process.
