NUPANT Commercial Drip Coffee Maker Set User Manual

Important Safety Instructions

Please read all instructions carefully before operating this appliance. Retain this manual for future reference.

• Electrical Safety: Do not immerse the appliance, cord, or plug in water or other liquids. Ensure the power supply matches the rating label.
• Hot Surfaces: The coffee makers and warming plates become very hot during and after operation. Avoid contact with hot surfaces. Use handles and knobs.
• Steam Hazard: Be cautious of hot steam escaping from the brewing basket during operation.
• Children: This appliance is not intended for use by children. Keep the appliance and its cord out of reach of children.
• Placement: Place the coffee maker on a stable, level, heat-resistant surface, away from the edge of the countertop.
• Maintenance: Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
• Intended Use: This appliance is designed for commercial and home use for brewing coffee only. Do not use for other purposes.

Package Contents

Verify that all items are present in your package:

• 1x NUPANT 1.8L/12 Cup Commercial Drip Coffee Maker
• 1x Glass Carafe (for 1.8L/12 Cup model)
• 1x NUPANT 2.2L Airpot Coffee Maker
• 1x Thermal Airpot (for 2.2L model)
• 1x Coffee Funnel (for each machine)
• Coffee Paper Filters (initial supply)
• User Manual

Image: Included components for the 2.2L Airpot Coffee Maker, showing the coffee funnel, airpot, and paper filters.

Product Overview

The NUPANT Commercial Drip Coffee Maker Set includes two robust machines designed for efficient coffee brewing in commercial or high-demand home settings. Both units feature durable 304 stainless steel construction.

1.8L/12 Cup Drip Coffee Maker

This model is designed for quick brewing, delivering a full pot in approximately 7 minutes. It features an independently heated plate to keep coffee at an ideal drinking temperature.

Image: The 1.8L/12 Cup Drip Coffee Maker brewing coffee into its glass carafe.

Image: Dimensional view of the 1.8L/12 Cup Drip Coffee Maker, indicating its height, depth, and width.

2.2L Airpot Coffee Maker

This model brews a full pot in approximately 9 minutes and utilizes a 2.2L thermal airpot to keep coffee hot for up to 24 hours without additional heating elements, preserving flavor.

Image: The 2.2L Airpot Coffee Maker dispensing coffee into its thermal airpot.

Image: Both NUPANT coffee makers, showcasing their distinct carafe types.

Key Components (Common to both models where applicable)

Image: Detailed view of key components including the water inlet, control panel, brewing funnel, and warming plate.

• Water Inlet: Located at the top, designed for easy filling.
• Control Panel: Features ON/OFF switch and a "Keep Warm" button (for 1.8L model). Indicator lights show status.
• Stainless Steel Funnel: Holds the coffee filter and ground coffee.
• Warming Plate (1.8L model): Keeps the glass carafe warm after brewing.
• Thermal Airpot (2.2L model): Insulated carafe for extended temperature retention.

Setup

1. Unpacking: Carefully remove all packaging materials and inspect the coffee makers for any damage.
2. Placement: Place each coffee maker on a flat, stable, heat-resistant surface near a power outlet. Ensure adequate clearance around the unit for ventilation.
3. Initial Cleaning: Before first use, wash the carafe/airpot, brewing funnel, and filter basket in warm, soapy water. Rinse thoroughly and dry. Wipe the exterior of the coffee maker with a damp cloth.
4. First Brew Cycle (Cleaning Cycle):
   • Fill the water reservoir with cold water up to the maximum fill line (1.8L or 2.2L depending on model).
   • Place an empty paper filter in the brewing funnel.
   • Place the empty carafe/airpot on its warming plate/base.
   • Plug in the coffee maker and turn it ON. Allow a full brewing cycle to complete without coffee grounds.
   • Discard the hot water and repeat this process once more to ensure the system is clean.

Operating Instructions

Brewing Coffee (Both Models)

1. Prepare Filter: Place a new paper filter into the brewing funnel.
2. Add Coffee Grounds: Add the desired amount of ground coffee to the filter. A general guideline is 1 tablespoon of coffee per cup (5 oz) of water, adjusting to taste.
3. Add Water: Open the water inlet lid and carefully pour fresh, cold water into the reservoir. Do not exceed the maximum fill line (1.8L for the 12-cup model, 2.2L for the Airpot model).
   

   Image: Filling the water reservoir of the 1.8L/12 Cup Drip Coffee Maker.

4. Position Carafe/Airpot: Ensure the glass carafe (for 1.8L model) or thermal airpot (for 2.2L model) is correctly placed on its warming plate/base beneath the brewing funnel.
5. Start Brewing: Plug in the coffee maker and press the ON/OFF switch. The indicator light will illuminate, and brewing will begin.
   • 1.8L/12 Cup model: Brewing takes approximately 7 minutes.
   • 2.2L Airpot model: Brewing takes approximately 9 minutes.
6. After Brewing:
   • For the 1.8L/12 Cup model, the warming plate will automatically activate to keep the coffee hot. You can press the "Keep Warm" button if available or turn off the machine when done.
   • For the 2.2L Airpot model, the thermal airpot will keep the coffee hot for up to 24 hours. No additional warming is needed.
7. Serving from Airpot: To dispense coffee from the airpot, press down on the lever or pump mechanism on the lid.
   

   Image: Dispensing coffee from the 2.2L thermal airpot.

Cleaning and Maintenance

Regular cleaning ensures optimal performance and extends the lifespan of your coffee makers.

Daily Cleaning

1. Unplug: Always unplug the coffee maker and allow it to cool completely before cleaning.
2. Discard Grounds: Remove the brewing funnel and discard the used coffee grounds and paper filter.
3. Wash Removable Parts: Wash the carafe/airpot, brewing funnel, and filter basket in warm, soapy water. Rinse thoroughly and dry. These parts are generally not dishwasher safe unless specified.
4. Wipe Exterior: Wipe the exterior surfaces of the coffee maker with a soft, damp cloth. Do not use abrasive cleaners or scouring pads.
5. Warming Plate (1.8L model): Wipe the warming plate with a damp cloth. Do not use abrasive materials.

Descaling (Monthly or as needed)

Mineral deposits from water can build up over time, affecting performance. Descale your coffee maker regularly.

1. Prepare Solution: Mix a solution of white vinegar and water (1:2 ratio) or use a commercial descaling agent according to its instructions.
2. Fill Reservoir: Pour the descaling solution into the water reservoir up to the maximum fill line.
3. Run Cycle: Place the empty carafe/airpot on its base. Turn on the coffee maker and allow half of the solution to brew through.
4. Soak: Turn off the coffee maker and let it sit for 15-30 minutes to allow the solution to work.
5. Complete Cycle: Turn the coffee maker back on and allow the remaining solution to brew through.
6. Rinse Cycles: Discard the descaling solution. Fill the reservoir with fresh, cold water and run at least two full brewing cycles with water only to rinse out any residual solution.

Troubleshooting

Specifications

Warranty and Support

NUPANT products are designed for durability and performance. For specific warranty information, please refer to the warranty card included with your purchase or visit the official NUPANT website.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact NUPANT customer service through the retailer where the product was purchased or via the contact information provided on the NUPANT brand store page.

Online Support: Visit the NUPANT Store on Amazon