Electri-HQ XYY0816 Upper Arm Digital Blood Pressure Monitor User Manual

1. Introduction

Thank you for choosing the Electri-HQ XYY0816 Upper Arm Digital Blood Pressure Monitor. This device is designed for accurate measurement of human blood pressure and pulse rate for adults over 12 years old. It features intelligent pressure control, advanced sensor technology, and a high-resolution LED display for clear results. The monitor also includes arrhythmia detection and a 2x99 memory function for tracking measurements over time.

Please read this manual thoroughly before using the device to ensure correct operation and to understand all safety precautions.

2. Important Safety Information

• This device is intended for use by adults over 12 years of age. It is not suitable for newborns or infants.
• Do not use this device on an injured arm or an arm undergoing medical treatment.
• Consult your physician before using this device if you have any medical conditions, especially if you are pregnant or have a pacemaker.
• Do not self-diagnose or self-treat based on measurement results. Always consult a healthcare professional for interpretation of your blood pressure readings.
• Keep the device and its components out of reach of children and pets.
• Avoid using the device in strong electromagnetic fields (e.g., near mobile phones, microwave ovens).
• Do not disassemble or attempt to repair the device yourself. Contact customer support for assistance.

3. Package Contents

Verify that all the following items are present in your package:

• 1 x Electri-HQ XYY0816 Blood Pressure Monitor (Main Unit)
• 1 x Upper Arm Cuff (suitable for arm circumference 22-36cm)
• 1 x USB Power Cable
• 1 x User Manual

Image: The Electri-HQ XYY0816 Blood Pressure Monitor main unit and its accompanying upper arm cuff.

4. Product Overview

Familiarize yourself with the components of your blood pressure monitor:

Image: Detailed diagram of the blood pressure monitor showing the display, buttons, and cuff connection point.

• Display Screen: Shows blood pressure readings (Systolic, Diastolic), pulse rate, date/time, user indicator, and WHO classification.
• ON/OFF Button: Powers the device on and off, and starts a measurement.
• "M" (Memory) Button: Accesses stored measurement records.
• "S" (Set) Button: Used for setting date, time, and other functions.
• Cuff Connector Port: Where the air tube from the cuff connects to the main unit.
• USB Power Port: For connecting the USB power cable.

5. Setup

5.1 Power Supply

The monitor can be powered by either AAA batteries or a USB power cable.

• Battery Installation: Open the battery compartment on the back of the device. Insert 4 AAA batteries (not included), ensuring correct polarity (+/-). Close the compartment securely.
• USB Power: Connect the provided USB cable to the monitor's USB port and the other end to a compatible USB power adapter (e.g., phone charger, computer USB port).

5.2 Connecting the Cuff

Insert the air plug of the upper arm cuff firmly into the cuff connector port on the side of the main unit.

6. Operating Instructions

6.1 Before Measurement

• Avoid eating, drinking alcohol, smoking, exercising, and bathing for 30 minutes before measurement.
• Rest for at least 5 minutes before taking a measurement.
• Sit upright with your back supported and feet flat on the floor. Do not cross your legs.
• Place your arm on a flat surface so the cuff is at heart level.
• Ensure the cuff is applied directly to your skin, not over clothing.

6.2 Applying the Cuff

1. Sit upright and keep your body straight.
2. Raise your palm and bring your arm parallel to your heart.
3. Ensure your palm is facing upwards, with the air tube parallel to the artery.
4. Wrap the cuff firmly around your upper arm, approximately 1-2 cm above the elbow joint. The air tube should run down the center of your arm.
5. Ensure the cuff is snug but not too tight; you should be able to insert one finger between the cuff and your arm.
6. Keep the cuff parallel to your heart with your palm facing up.

Image: Visual guide demonstrating the correct steps for cuff placement and body posture during measurement.

6.3 Taking a Measurement

1. Once the cuff is correctly applied and you are in a relaxed position, press the ON/OFF button.
2. The cuff will automatically inflate, and the measurement will begin. Remain still and do not talk during the measurement.
3. The device will deflate the cuff and display your Systolic pressure (SYS), Diastolic pressure (DIA), and Pulse rate (PUL/MIN) on the screen.
4. The monitor may provide voice prompts (in English) for convenience.
5. The display features a three-color backlight: white for normal blood pressure, orange for partial high blood pressure, and red for high blood pressure, based on WHO classification.

Image: The blood pressure monitor in use, showing a typical measurement result on its display with the cuff correctly applied to the arm.

6.4 Memory Function

The monitor automatically stores the last 99 measurements for two users (User A and User B).

• To view stored records, press the "M" (Memory) button when the device is off or in standby mode.
• Press the "M" button repeatedly to scroll through previous measurements.
• To switch between User A and User B records, use the "S" (Set) button (refer to the full manual for detailed setting instructions).

Image: The monitor's display illustrating the dual-user memory function, showing separate records for User A and User B.

7. Maintenance and Storage

• Cleaning: Wipe the main unit and cuff with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
• Storage: Store the device in a clean, dry place, away from direct sunlight, extreme temperatures, and high humidity.
• Battery Replacement: If the low battery indicator appears, replace all 4 AAA batteries with new ones. Remove batteries if the device will not be used for an extended period.
• Cuff Care: Ensure the cuff is not twisted or kinked during storage.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the warranty card included with your product or contact Electri-HQ customer service through your purchase platform. Please have your model number (XYY0816) and purchase date available when contacting support.