Introduction
Thank you for choosing the HOMCOM Push Back Recliner Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new recliner. Please read these instructions thoroughly before use and retain them for future reference.
Safety Information
- Maximum Weight Capacity: This recliner is designed to support a maximum weight of 264 lbs (120 kg). Do not exceed this limit to prevent damage or injury.
- Assembly: Ensure all parts are correctly assembled and tightened according to the instructions. Improper assembly can lead to instability and potential hazards.
- Children and Pets: Keep children and pets away from the recliner's moving parts during operation to avoid pinching or injury.
- Placement: Place the recliner on a level, stable surface. Ensure adequate space around the chair for full recline without obstruction.
- Moving the Chair: When moving the chair, lift it rather than dragging it to prevent damage to the legs or floor.
- Cleaning: Refer to the maintenance section for proper cleaning procedures. Avoid using harsh chemicals that may damage the fabric or frame.
Package Contents
Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
- Recliner Backrest
- Recliner Seat Base with Armrests
- Legs (4 pieces)
- Hardware Pack (screws, washers, Allen key)
Assembly Instructions
Assembly of the HOMCOM Push Back Recliner Chair is straightforward and typically requires two people. Please follow these steps:
- Attach the Legs: Carefully turn the seat base upside down. Locate the pre-drilled holes on the bottom of the seat base. Align each leg with a hole and secure it using the provided screws and Allen key. Ensure all legs are tightened securely.
- Attach the Backrest: With the legs attached, carefully turn the seat base upright. Align the metal brackets on the backrest with the corresponding slots on the seat base. Slide the backrest down firmly until it clicks into place. Ensure the backrest is fully engaged and stable.
- Final Check: Once assembled, gently rock the chair to ensure stability. Verify that all connections are secure before use.
Operating the Recliner
This recliner features a manual push-back mechanism, allowing you to adjust your seating position with ease.
- To Recline: Sit firmly in the chair. Lean back against the backrest, applying gentle pressure with your body weight. The backrest will recline, and the footrest will simultaneously extend upwards. Continue leaning back until you reach your desired recline angle, up to 135 degrees.
- To Return to Upright Position: Lean forward and push down on the footrest with your legs. The footrest will retract, and the backrest will return to its upright position.
Maintenance and Care
Proper care will extend the life and appearance of your recliner.
- Cleaning: The fabric upholstery can be wiped clean with a damp cloth. For spills, blot immediately with a clean, dry cloth. Avoid rubbing, which can spread the stain. For stubborn stains, a mild fabric cleaner suitable for linen-look fabric may be used, following the product instructions and testing on an inconspicuous area first.
- Vacuuming: Regularly vacuum the chair using an upholstery attachment to remove dust and debris.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fabric fading. Position the chair away from direct sunlight or use curtains/blinds.
- Check Connections: Periodically check all screws and bolts to ensure they remain tight. Retighten if necessary.
Troubleshooting
If you encounter any issues with your recliner, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair does not recline smoothly. | Mechanism obstruction or loose connections. | Check for any objects obstructing the reclining mechanism. Ensure all assembly bolts are tight. |
| Footrest does not extend or retract fully. | Insufficient body weight applied or mechanism obstruction. | Ensure you are leaning back with enough body weight. Check for obstructions under the footrest. |
| Chair feels unstable or wobbly. | Loose legs or backrest connection. | Verify that the legs are securely tightened and the backrest is fully engaged in its slots. |
Specifications
- Brand: HOMCOM
- Model Number: CA839-308V00CW0231
- Colour: Cream White
- Overall Dimensions (Upright): 27.25" W x 34.75" D x 39.75" H (69cm W x 88cm D x 101cm H)
- Reclining Dimensions: 27.25" W x 61.5" D x 29.25" H (69cm W x 156.5cm D x 74cm H)
- Seat Dimensions: 19.25" W x 19.75" D x 17.25" H (49cm W x 50cm D x 44cm H)
- Material: Linen-look fabric, Steel frame
- Item Weight: 20.87 kg (46 lbs)
- Maximum Weight Capacity: 264 lbs (120 kg)
- Special Features: Arm Rest, Ergonomic, Foot Rest, Reclining, Upholstered
Warranty and Support
For warranty information, product support, or to report missing/damaged parts, please contact HOMCOM customer service. Refer to your purchase documentation for specific contact details or visit the official HOMCOM website.
Manufacturer: Aosom Canada
Place of Business: Markham, Ontario, CA
Telephone: 1-416-792-6088