E MOTORAD Trex+ Electric Cycle User Manual

1. Introduction

This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your E MOTORAD Trex+ Electric Cycle. Please read this manual thoroughly before your first ride and retain it for future reference. Proper understanding of these instructions will ensure optimal performance and longevity of your electric cycle.

Figure 1: E MOTORAD Trex+ Electric Cycle (Crimson Black, 27.5" Wheel)

2. Safety Information

Your safety is paramount. Always adhere to the following guidelines:

• Always wear a helmet that meets safety standards.
• Perform a pre-ride inspection before each use, checking brakes, tires, battery, and all fasteners.
• Familiarize yourself with local traffic laws and regulations for electric bicycles.
• Do not operate the electric cycle under the influence of alcohol or drugs.
• Ensure all components are securely fastened before riding.
• Avoid riding in adverse weather conditions or on slippery surfaces.
• Maintain a safe distance from other vehicles and pedestrians.
• Do not modify the electric cycle's electrical system or components.
• Keep hands and feet away from moving parts.

3. Setup and Assembly

The E MOTORAD Trex+ Electric Cycle requires some assembly upon arrival. The package includes the following components:

• Electric Cycle (partially assembled)
• Battery
• Charger
• Tool Kit

For detailed assembly instructions, refer to the included quick start guide or utilize the virtual guided support provided by E MOTORAD. This support includes step-by-step video guides and quick troubleshooting assistance.

Figure 2: Virtual Guided Support for Assembly

3.1 Initial Battery Charge

Before your first ride, fully charge the battery. Connect the charger to the battery and then to a power outlet. The charging indicator on the charger will show the charging status. A full charge typically takes 4-5 hours.

4. Components Overview

Understanding the key components of your Trex+ Electric Cycle is essential for proper operation.

4.1 Frame

The Trex+ features a robust 18-inch Aluminium Alloy 6061 frame, designed for durability and comfort.

Figure 3: Aluminium Alloy 6061 Frame

4.2 Motor

Equipped with a high-torque 250W Rear Hub Motor, providing smooth and powerful assistance.

4.3 Battery

The removable 36V 10.2Ah Lithium-ion battery powers the electric motor, offering an extended range.

Figure 4: Removable Lithium-ion Battery

Figure 5: Battery Features (Key Lock)

4.4 Display

The Stem Integrated M8 LCD Display provides real-time riding data, including speed, battery level, and Pedal Assist System (PAS) level.

Figure 6: M8 LCD Display

Figure 7: Integrated Display View

4.5 Suspension

A 100mm front fork suspension with lockout ensures a comfortable ride over varied terrains.

Figure 8: Front Suspension

4.6 Drivetrain

The 7-Speed Shimano Altus drivetrain provides smooth and precise gear shifting for various riding conditions.

Figure 9: Shimano Altus Drivetrain and PAS

Figure 10: Shimano Altus Drivetrain

5. Operating Instructions

5.1 Power On/Off

To power on the electric cycle, press and hold the power button on the M8 LCD Display. Repeat the action to power off.

5.2 Riding Modes

The Trex+ offers multiple riding modes:

• Pedal Assist System (PAS) Mode: Provides electric assistance as you pedal. The M8 LCD Display allows you to select from multiple PAS levels (e.g., 1-5), with higher levels offering more assistance. This mode offers a range of 45+ km.
  

  Figure 11: PAS Mode

• Throttle Mode: Engages the motor without pedaling, similar to a scooter. This mode offers a range of 35+ km.
  

  Figure 12: Throttle Mode

• Mechanical Mode: Operates as a traditional bicycle with no electric assistance.
  

  Figure 13: Mechanical Mode

The maximum speed achievable with electric assistance is 25 km/h.

Figure 14: Range and Speed Capabilities

5.3 Gear Shifting

Use the trigger shifter to change between the 7 Shimano Altus gears. Shift gears smoothly to match terrain and speed, avoiding abrupt changes under heavy load.

5.4 Braking

The Trex+ is equipped with disc brakes. Apply both front and rear brakes simultaneously for effective stopping. Practice braking in a safe area to understand the stopping distance and feel.

6. Maintenance

Regular maintenance ensures the longevity and safe operation of your electric cycle.

• Cleaning: Clean the frame and components with a damp cloth. Avoid high-pressure washing directly on electrical components.
• Tires: Check tire pressure regularly. Refer to the tire sidewall for recommended pressure.
• Brakes: Inspect brake pads for wear and ensure brake levers operate smoothly. Adjust as needed.
• Chain: Keep the chain clean and lubricated for smooth gear changes and to prevent wear.
• Fasteners: Periodically check all bolts and nuts for tightness, especially on the handlebars, seat post, and wheels.
• Battery Care: Store the battery in a cool, dry place. If storing for an extended period, charge it to 50-70% every few months.

7. Troubleshooting

This section addresses common issues you might encounter with your E MOTORAD Trex+ Electric Cycle.

If you encounter issues not listed here or require further assistance, please contact E MOTORAD customer support.

8. Specifications

9. Warranty and Support

9.1 Warranty Information

The E MOTORAD Trex+ Electric Cycle comes with the following warranty coverage:

• Frame: 5-year warranty
• Motor Shell, Hub Motor, Controller: 1-year coverage
• Electronic Handlebar Controls, Electrical Connections, Battery Charger, Lighting System: 6 months coverage
• Paintwork: 1-year warranty (excluding accidental or deliberate damage)
• Battery: 2 years coverage

Please retain your proof of purchase for warranty claims.

9.2 Customer Support

For any queries, technical assistance, or warranty claims, please contact E MOTORAD customer support:

• Phone: +91 8686050590
• Email: contactus@emotorad.com
• Manufacturer: INKODOP TECHNOLOGIES PVT LTD
• Address: At post Jambe, taluka Mulshi169 2 Sangawade Road, Pune-411033, Maharashtra