mooas Wood Moon Cordless Digital LED Wall Clock

Introduction

Thank you for choosing the mooas Wood Moon Cordless Digital LED Wall Clock. This innovative clock combines modern design with practical functionality, offering a clear display of time, date, day of the week, temperature, and humidity. Its cordless design allows for flexible placement, either wall-mounted or on a desk with the included wooden stand. This manual provides detailed instructions for setting up and operating your new clock.

Image: Overview of the mooas Wood Moon Cordless Digital LED Wall Clock, highlighting its design and display.

Key Features

• Wireless Freedom: Cordless design for a clean, minimalist aesthetic without messy cables.
• Multi-Function LED Display: Shows time, week, temperature, humidity, and battery status. Supports 12-hour and 24-hour formats.
• Rechargeable Battery: Equipped with a 16,000mAh battery, providing up to 30 days of use on a single 15-16 hour USB-C charge. Includes a built-in battery indicator.
• Environmental Monitoring: Tracks temperature and humidity for a comfortable living environment.
• Dual Mounting Options: Can be displayed on a desk using the included solid wood stand or mounted on a wall.
• Automatic Brightness: Features a built-in ambient light sensor that adjusts LED brightness according to surrounding light, ensuring clarity during the day and no glare at night.
• Sound Sensor: The display can respond to claps or other sounds, turning on and automatically entering power-saving mode after 30 seconds of inactivity.

Package Contents

• mooas Wood Moon Cordless Digital LED Wall Clock (Model: MC-L3)
• Solid Wood Stand
• USB-C Charging Cable (1.5m)
• Wall-mount Screws (x2)
• Screw Anchors (x2)
• Art Wall Hooks (x2)
• Power Adapter (5V 2A)

Setup

1. Initial Power-Up:

   Before first use, locate the memory battery compartment at the back of the clock. Remove the transparent seal located between the memory battery and its contacts. This activates the battery for proper function.

2. Charging the Clock:

   Connect the provided USB-C charging cable to the clock's charging port and plug the other end into the power adapter. A full charge takes approximately 15-16 hours and provides up to 30 days of operation. The battery icon on the display indicates the charge status, including when the remaining charge is below 25%.

   For faster charging, it is recommended to use a 9V2A rated adapter.

   

   Image: The clock connected to a USB-C charging cable, illustrating the charging process.

3. Mounting Options:

   The clock offers two display options:

   • Wall Mount: Use the rear hole on the clock to hang it securely on a wall with the provided wall-mount screws and anchors.
   • Desk Clock: Place the clock on the included solid wood stand for display on a nightstand, shelf, or desk.
   

   Image: Demonstrates both wall-mounted and desk display options for the clock.

Operating Instructions

The mooas Wood Moon clock features a clear LED display and intuitive controls located on the rear of the device.

Display Overview

The large LED display provides comprehensive information at a glance:

Image: A diagram illustrating the various elements displayed on the clock's LED screen, including date, battery level, day of the week, time, humidity, and temperature.

Setting Time, Date, and Temperature

Use the buttons on the rear of the clock to adjust settings:

Image: Visual guide on how to use the rear buttons (SET, UP, DOWN) to configure the clock's settings.

• SET Button: Long press to enter time setting mode.
• UP Button:
  • Short press to change numbers during setting.
  • Long press to activate/deactivate automatic brightness.
  • Short press to change temperature unit between Celsius (°C) and Fahrenheit (°F).
• DOWN Button:
  • Short press to change numbers during setting.
  • Short press to switch between 12-hour and 24-hour time formats.

Brightness Modes

The clock offers three brightness modes for optimal visibility and energy saving:

Image: Illustrates the three display brightness modes: Low Light (dims softly in dark environments), Light Off (display completely off in dark environments), and Sound (display turns on in response to sound).

• Low Light: In dark environments, the display dims softly.
• Light Off: In dark environments, the display completely turns off.
• Sound: The display responds to claps or other sounds, turning on. It will automatically go into power-saving mode and turn off after 30 seconds of no sound detection.

Sound Sensor & Environmental Monitoring

The clock is equipped with a sound detection sensor and a temperature/humidity sensor to help maintain a comfortable environment.

Image: A close-up diagram highlighting the locations of the sound detection sensor and the temperature/humidity sensor on the clock.

Maintenance

• Cleaning: The clock surface is wipeable. Use a soft, dry cloth to clean the display and frame. Avoid abrasive cleaners or solvents.
• Charging: To maintain battery health, charge the clock fully when the battery indicator shows low power. Use the provided USB-C cable and power adapter, or a compatible 9V2A rated adapter for faster charging.
• Placement: Avoid placing the clock in direct sunlight or near extreme heat sources, as this may affect temperature/humidity readings and battery life.

Troubleshooting

• Display is blank or not turning on:
  • Ensure the transparent seal on the memory battery at the back of the product has been removed.
  • Check the battery level and charge the clock if necessary.
  • Verify that the clock is not in "Light Off" brightness mode. Try making a sound to activate the display if in "Sound" mode.
• Temperature unit is incorrect (Celsius/Fahrenheit):
  • Short press the UP button on the rear of the clock to toggle between °C and °F.
• Display is too bright or too dim:
  • The clock has an automatic brightness sensor. Ensure it is not obstructed.
  • Long press the UP button to activate or deactivate the automatic brightness feature.
• Clock not responding to sound:
  • Ensure the clock is set to "Sound" brightness mode. The sound sensor is located at the bottom center of the display.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact mooas customer service directly. Contact details can typically be found on the manufacturer's official website or through your point of purchase.

You can visit the official mooas store for more information: mooas Store