1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Locadence Wirelessly BT Media Remote Button. This device is designed to provide convenient control over various media functions in your vehicle or during cycling, enhancing your control experience.
2. Package Contents
Please verify that all items listed below are included in your package:
- 2 x Steering Wheel Control Buttons
- 2 x Silicone Cases
- 1 x Controller (Receiver)
- 1 x USB Charging Cable
- 1 x Viscose (Adhesive)
Image: The package includes two remote buttons, silicone cases, a controller, a USB charging cable, and adhesive.
3. Specifications
| Feature | Specification |
|---|---|
| Item Type | Steering Wheel Control Button |
| Material | Metal + ABS |
| Color | Black |
| Power | 1W |
| Voltage | 3-5 V |
| Signal to Noise Ratio | 96dB |
| Transmission Distance | Approx. 5m / 5.5yd |
| Battery | 3V Lithium Battery (Built-in) |
| Dimensions (approx.) | 36 x 9mm / 1.4 x 0.4in |
| Connectivity Technology | Bluetooth |
| Button Quantity | 2 |
| Controller Type | Button Control |
Image: The remote button measures approximately 36mm (1.4 inches) in diameter and 9mm (0.4 inches) in thickness.
4. Setup Instructions
4.1 Charging the Remote Buttons
Before first use, ensure the remote buttons are fully charged. Use the provided USB charging cable to connect the buttons to a power source. A small indicator light will show charging status.
Image: An angled view of the two remote buttons, highlighting the USB charging port located on the side of each button.
4.2 Installation
- Prepare Surface: Clean the desired installation area on your steering wheel or bicycle handlebars. Ensure the surface is dry and free of dust or grease.
- Apply Adhesive: Peel the protective film from the provided viscose (adhesive) and firmly attach it to the back of each remote button.
- Attach Buttons: Press the remote buttons firmly onto the prepared surface. Hold for a few seconds to ensure a secure bond.
- Positioning: Place the buttons in a location that allows for easy and safe access while driving or cycling.
Image: The remote buttons are shown installed on a car steering wheel, demonstrating a typical placement for convenient access.
4.3 Pairing with Your Device
The remote buttons connect wirelessly via Bluetooth to your media device (e.g., car stereo, smartphone). Follow these general steps:
- Activate Bluetooth: Ensure Bluetooth is enabled on your media device.
- Power On Buttons: The buttons typically power on automatically when charged or by pressing any button. Look for a blinking indicator light.
- Search for Devices: On your media device, search for available Bluetooth devices. The remote buttons should appear as a discoverable device.
- Connect: Select the remote button device from the list to pair. Once paired, the indicator light may become solid or turn off.
5. Operating Instructions
The Locadence BT Media Remote Button kit includes two distinct buttons, each with specific functions. The buttons feature backlighting for visibility in low-light conditions.
Image: Both remote buttons are shown with their icons illuminated, indicating their functionality in dark environments.
5.1 Left Button Functions
This button primarily controls communication and navigation features:
- GPS Icon: Activates or interacts with GPS navigation functions.
- 'M' Button: Typically used for Mode selection or Menu access.
- Square Icon: May function as a Stop or Source selection button.
- Phone Call Icons (Up/Down): Used for answering/ending calls or voice assistant activation.
Image: A close-up view of the left remote button, showing the illuminated GPS, 'M', Square, and Phone Call icons.
5.2 Right Button Functions
This button is dedicated to media playback and volume control:
- Volume Up (+): Increases the audio volume.
- Volume Down (-): Decreases the audio volume.
- Play/Pause: Toggles media playback (play/pause).
- Previous Track: Skips to the beginning of the current track or the previous track.
- Next Track: Skips to the next track.
Image: A close-up view of the right remote button, showing the illuminated Volume Up/Down, Play/Pause, Previous Track, and Next Track icons.
6. Maintenance
To ensure the longevity and optimal performance of your remote buttons, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to wipe the surface of the buttons. Avoid abrasive cleaners or solvents.
- Protection: Use the provided silicone cases to protect the buttons from dust, spills, and minor impacts.
- Storage: When not in use for extended periods, store the buttons in a cool, dry place away from direct sunlight and extreme temperatures.
- Charging: Recharge the buttons when the battery is low to prevent complete discharge, which can affect battery life.
7. Troubleshooting
If you encounter issues with your Locadence BT Media Remote Button, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Buttons not responding | Low battery; Not paired; Out of range | Charge buttons; Re-pair with device; Ensure device is within 5m range. |
| Cannot pair with device | Bluetooth off; Buttons not in pairing mode; Interference | Enable Bluetooth on device; Ensure buttons are powered on; Move away from other wireless devices. |
| Intermittent connection | Distance too far; Obstructions; Low battery | Reduce distance to device; Ensure clear line of sight; Charge buttons. |
| Buttons not illuminating | Low battery; Faulty unit | Charge buttons; If issue persists, contact support. |
8. Warranty Information
This product does not come with an explicit warranty description provided by the manufacturer. For any concerns regarding product defects or performance, please refer to the retailer's return policy or contact the seller directly.
9. Support
For further assistance or inquiries not covered in this manual, please contact the seller or refer to the official Locadence website for potential support resources.