1. Introduction
This manual provides instructions for the Philips EcoSet BLE IR Remote Controller, model 73289699. This wireless, battery-powered remote is designed to control Philips Ledinaire EcoSet LED panels, enabling energy-efficient and comfortable lighting solutions for various environments such as schools, offices, and hospitals.
The remote facilitates easy setup and offers features like light intensity adjustment, selection of lighting themes, and compatibility with external PIR sensors for automatic dimming based on motion and natural light.
2. Product Overview
Figure 1: Philips EcoSet BLE IR Remote Controller. This image displays the front face of the remote control, showing its various buttons and the Philips logo at the bottom.
The Philips EcoSet BLE IR Remote Controller is a compact, handheld device. It features a range of buttons for controlling your Ledinaire EcoSet LED panels. Key functions include power control, light intensity adjustment, scene selection, and configuration settings.
Button Functions:
- DEL: Delete function.
- CH: Channel selection.
- SEND: Transmit command.
- QUERY: Request status or information.
- IR add / ADD: Add an IR device or setting.
- daylight / DDR: Daylight dimming regulation.
- + / -: Increase/decrease values (e.g., brightness).
- RMV / remove: Remove a setting or device.
- SAV / save: Save current settings.
- ON / OFF: Power on/off the connected LED panels.
- OK / IR: Confirm selection or activate IR mode.
- Light bulb icons (top/bottom of OK): Adjust light intensity (brighter/dimmer).
- delay: Set a delay for a function.
- Test: Initiate a test sequence.
- background: Adjust background lighting percentage.
- COM: Communication function.
3. Setup
3.1. Battery Installation
The remote controller is battery-powered. Ensure batteries are correctly inserted according to the polarity indicators inside the battery compartment. Typically, this involves opening a cover on the back of the remote.
3.2. Pairing with Ledinaire EcoSet LED Panels
- Ensure your Philips Ledinaire EcoSet LED panels are powered on and within range of the remote controller.
- Refer to the specific instructions for your Ledinaire EcoSet LED panels for their pairing mode activation.
- On the remote, press and hold the CH button for a few seconds until the remote enters pairing mode (indicated by a flashing LED, if present).
- Follow any on-screen prompts or LED indicators on both the remote and the LED panels to confirm successful pairing.
- Once paired, the remote should be able to control the LED panels.
3.3. Connecting External PIR Sensors (Optional)
The EcoSet system supports external PIR sensors for automatic dimming. For detailed instructions on connecting and configuring these sensors, please refer to the documentation provided with your specific PIR sensor model and the Ledinaire EcoSet LED panel system.
4. Operating the Remote Controller
4.1. Basic Light Control
- To turn the lights ON, press the ON button.
- To turn the lights OFF, press the OFF button.
- To increase brightness, press the + button or the top light bulb icon.
- To decrease brightness, press the - button or the bottom light bulb icon.
4.2. Advanced Functions
- Daylight Dimming (DDR): Use the DDR button to activate or adjust daylight dimming settings. This feature automatically adjusts light output based on ambient natural light levels.
- Saving Settings: After adjusting light levels or other parameters, press the SAV button to save your preferred settings.
- Adding/Removing Devices: Use the ADD and RMV buttons for managing connected devices or settings within the EcoSet system.
- Test Function: The Test button can be used to perform diagnostic checks or test current settings.
- Background Percentage: Adjust the minimum background light level using the % background button.
5. Maintenance
5.1. Cleaning
Wipe the remote controller with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the surface or internal components.
5.2. Battery Replacement
When the remote's performance degrades or it stops responding, replace the batteries. Always use the recommended battery type (refer to the battery compartment or product specifications). Dispose of old batteries responsibly according to local regulations.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding | Dead batteries, remote out of range, pairing lost. | Replace batteries. Move closer to LED panels. Re-pair the remote (refer to Section 3.2). |
| Lights not dimming/adjusting | Incorrect settings, interference, panel not responding. | Check current settings. Ensure no obstructions. Power cycle the LED panels. |
| Daylight dimming not working | PIR sensor not connected or configured, sensor obstructed. | Verify PIR sensor connection and configuration. Ensure sensor is not blocked. |
7. Specifications
- Brand: Philips
- Model Name: EcoSet BLE IR Remote Controller
- Product Number: 73289699
- Connectivity: Bluetooth Low Energy (BLE), Infrared (IR)
- Power Source: Battery-powered (specific battery type not provided, check device compartment)
- Compatibility: Philips Ledinaire EcoSet LED Panels
- Weight: Approximately 900 g (Note: This weight seems unusually high for a remote control; please verify with product packaging if accuracy is critical.)
8. Warranty and Support
For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Philips lighting support website. You can also contact Philips customer service directly.
Philips Support Website: www.philips.com/support