GILLAS 3 Tier Console Table Instruction Manual

1. Introduction

Thank you for choosing the GILLAS 3 Tier Console Table. This manual provides detailed instructions for assembly, usage, maintenance, and troubleshooting to ensure you get the most out of your new furniture. Please read this manual carefully before assembly and retain it for future reference.

Important Safety Information

• Always follow the assembly instructions carefully to prevent injury.
• Do not overtighten screws immediately; assemble the entire frame first, then tighten screws one by one.
• This table has a maximum weight recommendation of 40 pounds; exceeding this limit may cause instability or damage.
• Ensure all connections are secure before placing items on the table.

2. Package Contents

Please verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, please contact GILLAS customer support.

• Top Shelf (1 piece)
• Middle Shelf (2 pieces)
• Bottom Shelf (1 piece)
• Metal Frame Components (various curved and straight pieces)
• Assembly Hardware (screws, Allen wrench)
• Instruction Manual

3. Setup and Assembly

Follow these steps carefully to assemble your GILLAS 3 Tier Console Table. An Allen wrench is provided, but a power drill can expedite the process.

1. Unpack and Identify Parts: Lay out all components on a clean, soft surface to prevent scratches. Refer to the parts list to identify each piece.
2. Assemble the Base Frame: Connect the bottom metal frame components as shown in the diagram. Do not fully tighten screws at this stage.
3. Attach Side Supports: Secure the curved metal side supports to the base frame.
4. Install Shelves: Place the bottom shelf onto the designated supports. Then, attach the middle and top shelves to the frame. Ensure all holes align.
5. Final Tightening: Once the entire frame and all shelves are in place and aligned, gradually tighten all screws one by one until secure. This method ensures proper alignment and stability.

Figure 3.1: Visual guide for table assembly. Remember to assemble the entire frame before tightening screws.

Figure 3.2: Product dimensions and a reminder to not tighten screws immediately during assembly.

Assembly Video

4. Operating and Usage

The GILLAS 3 Tier Console Table is designed for versatile use in various home settings. Its industrial chic design and three open shelves provide both aesthetic appeal and practical storage.

• Entryway Table: Ideal for holding keys, mail, decorative items, or a small plant.
• Sofa Table: Place behind a couch to hold lamps, books, or beverages.
• Hallway/Living Room Accent: Use as a display surface for photos, art, or collectibles.
• Storage: The three tiers offer ample space for organizing various items, helping to keep your area clutter-free.

Figure 4.1: The console table serving as an entryway table with various decorative items.

Figure 4.2: The console table positioned behind a sofa, demonstrating its use as a sofa table.

Figure 4.3: Key features of the table, including its robotic vacuum-friendly design and durable construction.

5. Maintenance

To maintain the appearance and longevity of your GILLAS 3 Tier Console Table, follow these simple care instructions:

• Cleaning: Wipe the surfaces with a dry, soft cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Spills: Promptly wipe up any spills to prevent staining, especially on the wooden surfaces.
• Placement: Avoid placing the table in direct sunlight or near heat sources to prevent warping or fading.
• Weight Distribution: Distribute weight evenly across the shelves and do not exceed the maximum weight recommendation of 40 pounds.

6. Troubleshooting

If you encounter any issues with your console table, please refer to the following common solutions:

• Table is Wobbly:
  • Ensure all screws are fully tightened.
  • Check that the table is on a level surface. Adjust floor glides if present.
  • Verify that all frame components are correctly assembled according to the instructions.
• Difficulty during Assembly:
  • Review the assembly steps and diagrams carefully.
  • Ensure screws are only finger-tightened until all parts are aligned, then tighten fully.
  • If holes do not align, slightly loosen adjacent screws to allow for adjustment.
• Scratches or Damage:
  • For minor scratches, a furniture repair marker or wood stain pen matching the finish may be used.
  • For significant damage, contact GILLAS customer support.

7. Specifications

8. Warranty and Support

The GILLAS 3 Tier Console Table comes with a Limited Warranty. For specific details regarding warranty coverage, claims, or any product support needs, please visit the official GILLAS store or contact their customer service directly.

GILLAS Store: Visit the GILLAS Store on Amazon