AIROASIS AK16 Indoor Air Quality Monitor User Manual

1. Introduction

Thank you for choosing the AIROASIS AK16 Indoor Air Quality Monitor. This device is designed to provide real-time monitoring of various indoor air quality parameters, helping you maintain a healthier living or working environment. Please read this manual thoroughly before operating the device to ensure proper use and optimal performance.

2. Safety Information

• Do not expose the device to extreme temperatures, direct sunlight, or high humidity.
• Avoid dropping or subjecting the device to strong impacts.
• Do not attempt to disassemble or repair the device yourself. Refer to qualified service personnel.
• Keep the device away from water and other liquids.
• Use only the provided charging cable for power.
• Ensure proper ventilation around the device for accurate readings.

3. Product Overview

3.1 Package Contents

• AIROASIS AK16 Air Quality Detector x 1
• Charging Cable x 1
• User Manual x 1

3.2 Device Layout

The AIROASIS AK16 features a clear display on the front and various ports and controls. The back of the device includes ventilation openings and a mounting option.

Figure 1: Rear view of the AIROASIS AK16, highlighting the ventilation grilles for air intake, the integrated wall-mount hole for easy installation, and the foldable stand for desktop placement. The top edge shows control buttons.

Top Panel Controls:

• Power Button: Press and hold to turn the device on or off.
• Mode Button: Short press to cycle through different display modes or parameters.
• Set Button: Used to enter settings menu or confirm selections.
• Up/Down Buttons: Navigate through menu options or adjust settings.

• Ventilation Grilles: Essential for accurate air sampling. Do not obstruct.
• Wall Mount Hole: Allows for secure wall installation.
• Foldable Stand: Provides stable support for desktop use.

4. Setup

4.1 Initial Charging

Before first use, fully charge the device. Connect the provided charging cable to the charging port on the device and the other end to a standard USB power adapter (not included). The charging indicator will show the charging status. A full charge typically takes approximately 3-4 hours.

4.2 Placement

For accurate readings, place the monitor in a central location within the room, away from direct drafts, windows, doors, or heat sources. Ensure the ventilation grilles on the back are not obstructed. The device can be placed on a flat surface using its foldable stand or mounted on a wall using the integrated wall-mount hole.

5. Operating Instructions

5.1 Power On/Off

Press and hold the Power button for 3 seconds to turn the device on. The display will light up and begin initialization. To turn off, press and hold the Power button again for 3 seconds.

5.2 Understanding Readings

The AIROASIS AK16 displays various air quality parameters. Refer to the on-screen indicators for specific measurements such as PM2.5, TVOC, HCHO, CO2, Temperature, and Humidity. The device may take a few minutes to stabilize and provide accurate initial readings after power-on.

5.3 Navigating Modes

Short press the Mode button to cycle through different display screens, showing various combinations of air quality data. Use the Up/Down buttons to adjust settings within the settings menu, accessed by pressing the Set button.

6. Maintenance

6.1 Cleaning

Wipe the device gently with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water. Ensure the ventilation grilles are free from dust and debris to maintain accurate sensor performance.

6.2 Storage

When not in use for extended periods, store the device in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to charge the device periodically if stored for a long time to preserve battery health.

7. Troubleshooting

8. Specifications

9. Warranty and Support

AIROASIS products are manufactured to high quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official AIROASIS website. For technical support, troubleshooting assistance, or service inquiries, please contact AIROASIS customer support through the contact information provided on their official website or product packaging.

Please retain your purchase receipt as proof of purchase for warranty claims.