1. Product Overview
The Uineer Wireless Mouse (Model U6P) is an ergonomic, rechargeable 2.4GHz optical mouse designed for comfortable and efficient use with various computer systems. It features adjustable DPI settings, a visible battery level indicator, and a plug-and-play wireless connection.
Figure 1: Uineer Wireless Mouse (Matte Black) with USB receiver.
2. Package Contents
- 1 x Wireless Mouse
- 1 x 50CM Type-C Charging Cable
- 1 x User Manual (this document)
- 1 x Nano receiver (stored at the bottom of the mouse)
3. Setup Guide
Follow these steps to set up your Uineer Wireless Mouse:
- Remove the Nano Receiver: Locate the small compartment at the bottom of the mouse and carefully remove the USB Nano receiver.
- Insert the Receiver: Plug the USB Nano receiver into an available USB port on your computer (laptop or desktop). No additional drivers are required for installation.
- Power On the Mouse: Locate the ON/OFF switch on the bottom of the mouse and slide it to the "ON" position. The mouse will automatically connect to the receiver.
Figure 2: Steps for initial mouse setup.
Your mouse is now ready for use. If the connection is not established, try plugging the receiver into a different USB port or restarting your computer.
4. Operating Instructions
4.1 Ergonomic Design
The Uineer Wireless Mouse is designed with an ergonomic shape that comfortably fits the contours of your hand, reducing strain during extended use. This design promotes a natural grip, enhancing comfort and efficiency for both work and entertainment.
Figure 3: Ergonomic design for comfortable use.
4.2 Adjustable DPI Settings
The mouse features four adjustable DPI (Dots Per Inch) levels to customize cursor sensitivity and precision. You can switch between 800, 1200, 1600, and 2400 DPI by pressing the DPI button located behind the scroll wheel. Each press cycles through the available settings, allowing you to find the optimal speed for your tasks, whether it's precise graphic design or fast-paced gaming.
Figure 4: Adjusting DPI levels for cursor speed.
4.3 Navigation Buttons
In addition to the standard left and right click buttons and scroll wheel, the mouse includes side buttons for convenient forward and backward navigation in web browsers or file explorers. The scroll wheel also provides tactile feedback for precise scrolling.
5. Maintenance and Charging
5.1 Visible Battery Level
The Uineer Wireless Mouse features a visible battery level display, typically indicated by LED lights near the DPI button. This allows you to monitor the battery status at a glance and know when it's time to recharge, preventing unexpected power loss during use.
Figure 5: Visible battery level indicator.
5.2 Recharging the Mouse
This mouse is equipped with a long-lasting rechargeable battery. To charge, connect the provided USB-C charging cable to the mouse's USB-C port (located at the front) and the other end to a USB power source (e.g., computer USB port, wall adapter). A full charge typically takes 2-3 hours. The battery indicator lights will show charging progress and turn off when fully charged.
Figure 6: Charging the mouse via USB-C.
6. Troubleshooting
- Mouse not responding:
- Ensure the mouse is turned "ON" using the switch on the bottom.
- Verify the USB Nano receiver is securely plugged into a working USB port on your computer. Try a different USB port.
- Check the battery level indicator. If low, recharge the mouse.
- Restart your computer.
- Cursor movement is erratic or too slow/fast:
- Press the DPI button (behind the scroll wheel) to cycle through the 4 DPI settings (800-1200-1600-2400) until you find a comfortable cursor speed.
- Ensure the mouse is used on a suitable surface. Avoid highly reflective or transparent surfaces.
- Side buttons or middle click are loud:
- While the main left and right click buttons are designed for quiet operation, the side buttons and middle click (scroll wheel click) may produce an audible click sound. This is normal for the design of these specific buttons.
7. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 4.65 x 3.22 x 0.04 inches (11.8 x 8.2 x 0.1 cm) |
| Item Weight | 3.35 ounces (95 grams) |
| Model Number | U6P |
| Batteries | 1 Lithium Metal battery (included, rechargeable) |
| Brand | Uineer |
| Color | Matte Black |
| Connectivity Technology | 2.4GHz Wireless (USB Nano Receiver) |
| Special Features | Wireless, Battery Level Visible, Ergonomic Design, Rechargeable, 4 Adjustable DPI Levels |
| Movement Detection | Optical |
8. Warranty and Support
Uineer provides a forty-five day refund policy and one year of free replacement service for this product. For any questions, technical support, or warranty claims, please contact Uineer customer service through the platform where you purchased the product or visit the official Uineer Store.
