Product Overview
The Mexico Placas Credit and Debit Card Skin is a high-quality vinyl sticker designed to personalize your credit or debit cards. It features an air-release vinyl for easy, bubble-free application and is compatible with cards that have a chip. This product comes as a pack of two stickers.
Image: A credit card skin featuring the "Sinaloa - Tambora" Mexican license plate design. The design includes a map of Sinaloa, the word "SINALOA" in large black letters, and a figure playing a drum (tambora). A cutout for the card's chip is visible on the left side of the design. The sticker is designed to cover the front of a credit or debit card.
Setup and Application
Follow these steps for proper application of your card skin to ensure a smooth, bubble-free finish.
- Clean the Card Surface: Ensure your credit or debit card is clean and free of dust, oils, or any residue. Use a clean, dry cloth to wipe the card surface.
- Align the Skin: Carefully peel the card skin from its backing. Align the skin with the edges of your credit or debit card, paying close attention to the chip cutout to ensure it matches your card's chip.
- Apply Gradually: Once aligned, begin applying the skin from one end of the card, slowly pressing it down and smoothing it out to prevent air bubbles. The air-release vinyl helps in this process.
- Smooth Out Bubbles: If any small air bubbles appear, gently press them towards the edges of the card using your finger or a soft, flat object.
- Verify Fit: Ensure the skin is securely adhered to the card and that the chip area is clear and unobstructed.
This skin is intended for newer types of cards that do not have embossed numbers. While thin enough for chip payment insertion, it is ideal for tap-to-pay or contactless cards.
Operating (Usage)
Once applied, your card skin allows for normal use of your credit or debit card. The design is optimized for visual appeal without hindering functionality.
- Contactless Payments: The thin vinyl material does not interfere with NFC (Near Field Communication) for tap-to-pay transactions.
- Chip Payments: The precision cutout ensures that the card's chip remains fully exposed and functional for insertion into card readers.
- Magnetic Stripe: While the skin covers the front, it does not interfere with the magnetic stripe on the back of the card. However, for optimal performance, ensure the magnetic stripe area on the back of the card is clean and unobstructed.
Maintenance
To maintain the appearance and longevity of your card skin, follow these simple care guidelines:
- Cleaning: Wipe the surface of the card skin with a soft, dry, or slightly damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the vinyl.
- Avoid Sharp Objects: Do not scratch or pick at the card skin with sharp objects, as this can cause tears or peeling.
- Storage: When not in use, store your card in a wallet or cardholder to protect the skin from excessive wear and tear.
Troubleshooting
If you encounter any issues with your card skin, consider the following:
- Bubbles After Application: If small bubbles appear, gently press them towards the nearest edge of the skin to release the trapped air. For persistent bubbles, a very fine needle can be used to carefully puncture the bubble and then smooth it down, but this should be done with extreme caution.
- Skin Peeling at Edges: Ensure the card surface was clean and dry before application. If peeling occurs, the skin may need to be replaced.
- Card Reader Issues: If your card is not being read correctly, first ensure the chip is clean and unobstructed. If issues persist, the card skin may need to be removed to confirm it is not interfering with the card reader.
Specifications
| Feature | Detail |
|---|---|
| Brand | Generic |
| Model | Sinaloa - Tambora |
| Material | High-quality Vinyl |
| Special Feature | Air Release for Bubble-Free Application |
| Compatibility | Credit/Debit Cards with Chip (ideal for non-embossed numbers) |
| Number of Pieces | 2 |
| Dimensions (L x W x H) | 6 x 6 x 0.1 inches (packaging/sheet size, not card size) |
| Item Weight | 0.96 ounces |
| Country of Origin | USA |
Warranty and Support
This product is manufactured by Generic. For any questions regarding application, product quality, or general inquiries, please refer to the seller's contact information on the platform where the product was purchased.
Standard return policies apply as per the retailer's terms and conditions. Please check your purchase receipt or order details for specific warranty information or return procedures.
