Zoxa DJ Stage Lights with Stand Instruction Manual

Introduction

This instruction manual provides essential information for the safe and efficient operation of your Zoxa DJ Stage Lights with Stand. This professional lighting package is designed for DJs, event planners, and performers, offering vibrant stage lighting effects for various events. Please read this manual thoroughly before setup and operation to ensure optimal performance and safety.

Safety Information

• Always connect the unit to a grounded power outlet.
• Ensure the voltage of the power source matches the product's requirements (120 Volts).
• Do not expose the unit to rain or moisture to prevent fire or shock hazards.
• Avoid direct eye exposure to the light source.
• Ensure proper ventilation around the unit to prevent overheating.
• Disconnect from power before cleaning or servicing.
• Do not attempt to repair the unit yourself. Refer all servicing to qualified personnel.
• Securely mount the light bar to the stand to prevent accidental falls.

Package Contents

Verify that all items listed below are included in your package:

• 1 x LED Par Light Bar with 4 LED Par Cans (Tri-9W RGB LED diodes)
• 1 x Heavy-Duty Tripod Light Stand with T-Bar
• 1 x Wireless Foot-Switch Controller
• 1 x IR Remote Control
• 1 x Power Cable
• 1 x Foot Switch Cable
• 1 x Carrying Bag

Image: All components included in the Zoxa DJ Stage Lights with Stand package, including the light bar, tripod stand, foot pedal, remote, and carrying bag.

Setup Instructions

Follow these steps to set up your Zoxa DJ Stage Lights:

1. Unpack Components: Carefully remove all items from the carrying bag.
2. Assemble the Tripod Stand:
   • Extend the tripod legs to form a stable base. Secure the legs using the locking knob.
   • Extend the vertical pole of the stand to the desired height. Ensure the safety pin is inserted into the appropriate hole to secure the height.
   

   Image: Close-up view of the tripod stand's metal lock and stable tripod base, highlighting key stability features.

   

   Image: Diagram illustrating the minimum (96.52cm/38in) and maximum (2.4 meters/94in/140cm) height of the tripod stand, with a close-up of the locking mechanism.
3. Mount the Light Bar: Carefully place the LED light bar onto the T-bar of the tripod stand. Ensure it is securely seated.
4. Connect Power: Plug the power cable into the power input on the back of the light bar and then into a suitable grounded power outlet.
5. Connect Foot Pedal (Optional): If using the wireless foot pedal, connect its cable to the designated input on the light bar.

Operating Instructions

Your Zoxa DJ Stage Lights offer multiple control modes for versatile lighting effects.

Control Panel Overview

Image: Detailed view of the light bar's control panel, showing the power port, DMX In/Out, digital display, and control buttons (Menu, Up, Down, Enter, Mic).

• Digital Screen: Displays current mode and settings.
• Menu Button: Navigates through different modes and settings.
• Up/Down Buttons: Adjust parameters or select options.
• Enter Button: Confirms selections.
• MIC: Built-in microphone for sound-activated modes.

Wireless Foot Pedal Functions

The wireless foot pedal provides convenient hands-free control (up to 10m range).

Image: Diagram of the wireless foot pedal, showing its four buttons: AUTO, SOUND, COLOR, and BLACK, along with a table explaining each function.

DMX Control

The Zoxa DJ Stage Lights are DMX-compatible, allowing integration with professional lighting systems. It supports 4 channels for controlling 1-4 colors per light. Refer to your DMX controller's manual for specific programming instructions. The unit supports CH3-CH5 DMX compatibility.

Strobe Rate

The strobe rate can be adjusted from 0-20Hz for enhanced accuracy and dynamic effects.

Image: The Zoxa DJ Stage Lights showcasing different color outputs, including red, blue, green, and mixed colors.

Image: Promotional image highlighting key features such as wireless foot pedal, sound active mode, noise-free motor operation, lightweight design, and user-friendliness (can be used without DMX controller).

Image: Another feature overview, emphasizing IR Remote & DMX control, 4-mode wireless foot controller, music sync via MIC, ease of use, lightweight, and portability.

Image: Examples of events where the Zoxa DJ Stage Lights can be used, including parties, birthdays, DJ shows, weddings, and Christmas celebrations.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior of the unit. Do not use harsh chemicals or abrasive materials.
• Lens Cleaning: Gently wipe the light lenses with a soft, lint-free cloth to maintain light output clarity.
• Storage: When not in use, store the unit in its original carrying bag in a cool, dry place away from direct sunlight and extreme temperatures.
• Inspection: Periodically check all cables and connections for any signs of wear or damage. Replace damaged components immediately.

Troubleshooting

Specifications

Warranty & Support

For warranty information or technical support, please contact Zoxa customer service. Details can typically be found on the product packaging or the official Zoxa website. Keep your purchase receipt as proof of purchase for warranty claims.

For additional resources and frequently asked questions, visit the Zoxa support page.