Gyfimoie G-770-1 6-Drawer Dresser with Charging Station and LED Light User Manual

Introduction

Thank you for choosing the Gyfimoie G-770-1 6-Drawer Dresser. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and efficient use of your new furniture. This dresser features six spacious drawers, an open storage cubby, a built-in charging station, and adjustable LED lighting to enhance your living space.

Image: The Gyfimoie G-770-1 6-Drawer Dresser in white, showcasing its modern design and six drawers.

Safety Information

• Always follow assembly instructions carefully.
• Do not overload drawers. Distribute weight evenly.
• Ensure the anti-tip mechanism is securely installed to prevent tipping, especially in households with children.
• Keep electrical components (charging station, LED lights) away from water and moisture.
• Use only the provided power cord and avoid using damaged cords or outlets.
• Do not allow children to climb on the dresser.

Package Contents

Before assembly, verify that all parts and hardware are present. Refer to the included parts list in your package for a complete inventory. If any items are missing or damaged, please contact customer support.

The assembly video below provides a visual overview of the parts and the assembly process.

Setup and Assembly

Assembly is required for this dresser. Please follow the instructions carefully. It is recommended to assemble the dresser on a soft, clean surface to prevent scratches.

Step 1: Assemble the Drawers

Begin by assembling each of the six drawers. Attach the side panels to the front and back panels, then slide in the bottom panel. Secure all connections with the provided hardware. Ensure the metal roller guides are correctly installed on the drawer sides.

Step 2: Assemble the Main Frame

Connect the base panel to the side panels of the dresser. Then, attach the internal divider panels. Secure the back panel to the frame. Ensure all screws are tightened for stability.

Step 3: Install the Charging Station and LED Lights

Place the top panel onto the main frame. Secure the charging station into its designated slot on the top surface. Connect the LED light strip along the inside edge of the open storage cubby. Route the power cables neatly.

Image: A detailed view of the integrated charging station, featuring two AC outlets and two USB ports for convenient device charging.

Image: An illustration of the LED light strip controls, showing options for key control, RGB colors, light modes, music modes, and app control.

Step 4: Insert Drawers and Install Anti-Tip Mechanism

Carefully slide the assembled drawers into their respective slots on the main frame. Finally, install the anti-tip mechanism to the back of the dresser and secure it to a wall stud according to the instructions provided with the hardware. This is a critical safety step.

Image: The dresser with multiple drawers pulled out, demonstrating the generous storage capacity for various items.

Operating Instructions

Using the Drawers

The drawers are equipped with metal roller guides for smooth operation. To open, gently pull the metal handles. To close, push the drawers fully until they are flush with the dresser frame.

Using the Charging Station

The built-in charging station includes 2 AC outlets and 2 USB ports. Plug the dresser's main power cord into a standard wall outlet. You can then plug your electronic devices into the AC outlets or USB ports for convenient charging.

Operating the LED Lights

The adjustable LED lights can be controlled via a key button or a dedicated mobile application. Refer to the separate LED light controller manual for detailed instructions on pairing with the app, changing colors, adjusting brightness, and selecting various modes (e.g., light mode, music mode, timing mode).

Image: The dresser functioning as a TV stand, with the LED lights illuminated, demonstrating its versatility and ambient lighting feature.

Maintenance

Cleaning

The dresser features a smooth, waterproof surface. To clean, wipe with a damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the finish. Dry immediately with a clean, soft cloth.

Drawer Care

Periodically check the drawer slides for smooth operation. If a drawer becomes stiff, ensure no debris is obstructing the slides. Do not force drawers open or closed.

Electrical Components

Ensure the charging station and LED light connections are secure. If any electrical component appears damaged, discontinue use and contact customer support.

Troubleshooting

• Dresser is wobbly: Ensure all screws and connections are tightened. Verify the dresser is on a level surface. Adjust leveling feet if applicable.
• Drawers do not slide smoothly: Check for obstructions in the drawer slides. Ensure the slides are properly aligned and secured.
• Charging station not working: Verify the dresser's main power cord is securely plugged into a working wall outlet. Check if the devices being charged are properly connected.
• LED lights not working or not responding: Ensure the LED light strip is properly connected to its power source. Check the LED controller for power. If using the app, ensure proper pairing and connectivity. Refer to the LED light controller manual for specific troubleshooting steps.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or contact Gyfimoie customer service directly. Please have your model number (G-770-1) and purchase date available when contacting support.