Introduction
The BYRANKE B1-E Smart Bird Feeder with Camera offers an innovative way to observe and interact with local birdlife. Equipped with a high-definition camera, solar panel for continuous charging, and advanced AI for bird identification, this feeder provides real-time notifications and recordings directly to your smartphone. This manual provides essential information for setup, operation, and maintenance to ensure optimal performance and enjoyment.
Important Safety Information
To prevent damage or harm to wildlife, secure the feeder to prevent access by larger animals. Use bird-safe food only. Follow local regulations regarding feeding wildlife.
Package Contents
Verify that all items are present in your package:
- Smart Bird Feeder with integrated camera
- Solar Panel (3W) with charging cable
- Mounting Kit (screws, anchors, strap for tree mounting, wall mount bracket)
- Antenna
- User Manual
- Fruit holders / Jelly feeder attachments
Image: All components of the BYRANKE B1-E Smart Bird Feeder, including the main feeder unit, solar panel, mounting hardware, and various attachments, are displayed on a wooden surface.
Setup
1. Initial Camera Charging & SD Card Installation
Before first use, fully charge the camera's built-in 5200 mAh battery using the provided USB cable. The charging port is located under a protective cover on the back of the camera unit. If desired, insert a Micro SD card (up to 128GB, not included) into the designated slot for local video storage.
Image: A close-up view of the camera module, highlighting the USB charging port and the Micro SD card slot, both protected by a rubber cover.
2. Assembling the Feeder Unit
- Attach the roof to the main feeder body.
- Screw the antenna into the designated port on the back of the feeder.
- Secure the bird standing perch to the front of the feeder.
- Install the fruit holders or jelly feeder attachments onto the perch as desired.
3. Solar Panel Installation
Connect the solar panel to the feeder unit using the provided cable. The solar panel can be mounted separately to ensure maximum sun exposure, or directly to the feeder's mounting bracket.
Image: The BYRANKE B1-E Smart Bird Feeder is shown mounted on a wall, with the solar panel attached to its side, illustrating the charging mechanism.
4. Mounting the Feeder
Choose a suitable location with good 2.4GHz Wi-Fi signal strength. The feeder can be mounted using:
- Tree Mount: Use the provided strap to secure the feeder to a tree trunk.
- Wall Mount: Use the wall mount bracket and screws to attach the feeder to a flat surface.
- Pole Mount: The feeder base is compatible with standard pole mounts (pole not included).
Image: Three different mounting scenarios for the BYRANKE B1-E Smart Bird Feeder are depicted: attached to a tree, mounted on a wall, and placed on a pole.
5. App Download and Pairing
Download the companion app (refer to the user manual for specific app name and QR code). Follow the in-app instructions to add the camera and connect it to your 2.4GHz Wi-Fi network. Ensure the blue indicator LED is blinking or you hear a voice prompt indicating it's ready for pairing.
Video: This video demonstrates the unboxing and installation process of the bird feeder camera, including connecting the solar panel and setting up the camera for use.
Operating Instructions
1. Filling the Feeder
Open the top lid of the feeder and pour bird seed into the main compartment. The large capacity container reduces the frequency of refills. Close the lid securely after filling.
2. Real-time Bird Watching & Notifications
Once connected, use the app to view live footage from the camera. The smart AI algorithms will automatically identify bird species (over 10,000 species supported) and send real-time notifications to your phone when visitors arrive. You can also access details about each identified species through the app.
Image: A smartphone screen displays a real-time notification from the BYRANKE B1-E Smart Bird Feeder, indicating a bird detection and identification.
3. Night Vision & Motion Detection
The 2K HD camera features night vision, ensuring clear and vibrant images and videos even in low-light conditions. Motion detection triggers recordings and notifications, capturing every bird visit.
Image: The BYRANKE B1-E Smart Bird Feeder camera's capabilities are highlighted, showing its 2K HD resolution, PIR sensor, 160-degree wide angle, and clear day and night vision.
4. Two-Way Audio & Deterrent
The camera supports two-way audio, allowing you to listen to the birds or speak through the feeder. This feature can also be used to deter unwanted visitors like squirrels with sound or light.
5. Video Storage & Sharing
Recorded videos and images are stored in the cloud (subscription may be required for full features) or on an inserted Micro SD card. You can easily share bird-watching moments with family and friends through the app.
Image: An illustration demonstrating the local and cloud storage capabilities of the BYRANKE B1-E Smart Bird Feeder, with options for saving videos and photos.
Maintenance
The BYRANKE B1-E is designed with IP65 weatherproof materials for outdoor use. It features a drainage base to prevent water accumulation. Regularly check the feeder for cleanliness and refill bird seed as needed. Clean the camera lens periodically for optimal image clarity.
Image: The BYRANKE B1-E Smart Bird Feeder is depicted in rainy conditions, highlighting its IP65 weatherproof rating, anti-aging materials, sturdy bracket, and bottom drain holes for outdoor durability.
Troubleshooting
- No Power: Ensure the solar panel is receiving adequate sunlight or charge the camera directly via USB.
- Wi-Fi Connection Issues: Verify your Wi-Fi network is 2.4GHz (5GHz is not supported). Ensure the feeder is within range of your router.
- Poor Image Quality: Clean the camera lens. Check for obstructions.
- No Notifications: Check app settings to ensure notifications are enabled. Verify motion detection sensitivity.
- AI Identification Not Working: Ensure you have an active subscription for AI features if required.
Specifications
- Brand: BYRANKE
- Model: B1-E
- Target Species: Bird
- Material: Acrylonitrile Butadiene Styrene (ABS)
- Special Features: Rain Proof, Weather Resistant, Weatherproof
- Mounting Type: Hanging Mount (strap included), Wall Mount (bracket included), Pole Mount (pole not included)
- Product Dimensions: 12.01"L x 7.28"W x 10.87"H
- Power Source: Battery Powered (5200 mAh Lithium Ion battery included), Solar Panel (3W external solar panel included)
- Item Weight: 2.65 Pounds
- Connectivity: 2.4GHz Wi-Fi (not 5GHz)
- Storage: Cloud Storage, Micro SD Card (up to 128GB, not included)
Warranty & Support
For warranty information or technical support, please refer to the contact details provided by the seller or visit the BYRANKE official website. Keep your purchase receipt for warranty claims.