E ECSEM Replacement Charger for MONODEAL DV68 Bone Conduction Headphones User Manual

Introduction

This manual provides instructions for the safe and effective use of your E ECSEM Replacement Magnetic USB Charging Cable, specifically designed for MONODEAL DV68 Bone Conduction Headphones. This cable ensures a stable and efficient charging experience for your device.

What's in the Box

• 2 x E ECSEM Magnetic USB Charging Cables (60CM/2ft each)

Specifications

Setup

1. Unpack the Cable: Carefully remove the charging cable from its packaging.
2. Identify Connectors: One end of the cable has a magnetic charging probe, and the other end has a standard USB Type A connector.
3. Prepare Power Source: Select a suitable USB power source such as a computer's USB port, a laptop, a power bank, or a standard USB wall adapter (not a fast charging adapter).

Image: The USB Type A connector can be plugged into various standard USB power sources like PCs, laptops, power banks, or wall adapters. Avoid using fast charging adapters.

Operating Instructions

1. Connect to Power: Insert the USB Type A end of the charging cable into your chosen USB power source.
2. Connect to Headphones: Align the magnetic charging probe with the charging port on your MONODEAL DV68 Bone Conduction Headphones. The magnets will automatically snap the connector into place, ensuring a secure connection.
3. Monitor Charging: Observe the charging indicator on your headphones (if available) to confirm that charging has begun.
4. Charging Completion: Once your headphones are fully charged, disconnect the magnetic connector from the headphones and then remove the USB Type A connector from the power source.

Image: The magnetic charging end connects to your headphones, while the USB-A end connects to a power source.

Image: A clear view of the magnetic charging pins and the standard USB-A connector.

Maintenance

• Cleaning: Gently wipe the cable and connectors with a dry, soft cloth to remove dust or debris. Avoid using liquids or abrasive cleaners.
• Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures.
• Handling: Avoid sharp bends or kinks in the cable to prevent internal damage. The cable is designed with a flexible PVC material for durability.

Image: The cable features multi-layer shielding for stability, flexible PVC for easy handling, and pure copper probes for efficient conduction.

Image: The cable's reinforced design provides double protection and a long bend lifespan, ensuring durability.

Troubleshooting

Headphones not charging:

• Ensure the magnetic connector is properly aligned and securely attached to the headphone's charging port.
• Verify that the USB Type A connector is fully inserted into a working USB power source.
• Try a different USB port or power source.
• Important: Ensure you are using a standard 5V/0.5-1A USB power source. Do not use fast charging adapters, as they can damage the headphones or charger.

Cable or headphones getting hot during charging:

• Immediately disconnect the charger from both the power source and the headphones.
• This indicates a potential issue with the power source or the headphones.
• Crucial: Do not use fast charging adapters. Using an adapter with higher voltage or current than specified (5V/0.5-1A) can cause overheating and permanent damage to your headphones.
• Contact the manufacturer of your MONODEAL DV68 headphones for further assistance if overheating persists with a standard power source.

Slow charging:

• Ensure the power source provides sufficient current (0.5-1A).
• Avoid charging through unpowered USB hubs.

Warranty and Support

For any issues or questions regarding your E ECSEM Replacement Magnetic USB Charging Cable, please refer to your purchase documentation or contact E ECSEM customer support through the retailer where the product was purchased. Please provide your model number (ECSEM-DV68-USBA-60-FF) when seeking support.